EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 409 (2025) MATEC Web Conf., 409 (2025) 06005 References
Open Access
Issue
MATEC Web Conf.
Volume 409, 2025
Concrete Solutions 2025 – 9th International Conference on Concrete Repair, Durability & Technology
Article Number 06005
Number of page(s) 9
Section Concrete and Admixture Technology 1
DOI https://doi.org/10.1051/matecconf/202540906005
Published online 13 June 2025
  1. B. Khoshnevis, Automated construction by contour crafting - related robotics and information technologies, Automation in Construction 13(1) (2004) 5-19. [CrossRef] [Google Scholar]
  2. G. Bai, L. Wang, G. Ma, J. Sanjayan, M. Bai, 3D printing eco-friendly concrete containing under- utilised and waste solids as aggregates, Cement and Concrete Composites 120 (2021). [Google Scholar]
  3. B. Panda, S.C. Paul, N.A.N. Mohamed, Y.W.D. Tay, M.J. Tan, Measurement of tensile bond strength of 3D printed geopolymer mortar, Measurement 113 (2018) 108-116. [CrossRef] [Google Scholar]
  4. C.M. Rouhana, M.S. Aoun, F.S. Faek, M.S. Eljazzar, F.R. Hamzeh, The Reduction of Construction Duration by Implementing Contour Crafting (3d Printing), 22nd Annual Conference of the International Group for Lean Construction, Oslo, 2014. [Google Scholar]
  5. H. Yang, J.K.H. Chung, Y. Chen, Y. Li, The cost calculation method of construction 3D printing aligned with internet of things, EURASIP Journal on Wireless Communications and Networking 2018(1) (2018). [Google Scholar]
  6. J. Zhang, J. Wang, S. Dong, X. Yu, B. Han, A review of the current progress and application of 3D printed concrete, Composites Part A: Applied Science and Manufacturing 125 (2019). [Google Scholar]
  7. P. Sikora, M. Chougan, K. Cuevas, M. Liebscher, V. Mechtcherine, S.H. Ghaffar, M. Liard, D. Lootens, P. Krivenko, M. Sanytsky, D. Stephan, The effects of nano- and micro-sized additives on 3D printable cementitious and alkali-activated composites: a review, Applied Nanoscience 12(4) (2021) 805-823. [Google Scholar]
  8. S. Bhattacherjee, A.S. Basavaraj, A.V. Rahul, M. Santhanam, R. Gettu, B. Panda, E. Schlangen, Y. Chen, O. Copuroglu, G. Ma, L. Wang, M.A. Basit Beigh, V. Mechtcherine, Sustainable materials for 3D concrete printing, Cement and Concrete Composites 122 (2021). [Google Scholar]
  9. D. Dey, D. Srinivas, B. Panda, P. Suraneni, T.G. Sitharam, Use of industrial waste materials for 3D printing of sustainable concrete: A review, Journal of Cleaner Production 340 (2022). [Google Scholar]
  10. T. Ding, J.Z. Xiao, F. Qin, Z.H. Duan, Mechanical behaviour of 3D printed mortar with recycled sand at early ages, Construction and Building Materials 248 (2020) 11. [Google Scholar]
  11. A.V. Rahul, M.K. Mohan, G. De Schutter, K. Van Tittelboom, 3D printable concrete with natural and recycled coarse aggregates: Rheological, mechanical and shrinkage behaviour, Cement & Concrete Composites 125 (2022) 13. [Google Scholar]
  12. S. Zou, J.Z. Xiao, T. Ding, Z.H. Duan, Q.T. Zhang, Printability and advantages of 3D printing mortar with 100% recycled sand, Construction and Building Materials 273 (2021) 6. [Google Scholar]
  13. Y.W. Wu, C. Liu, H.W. Liu, G.L. Bai, Y.S. Meng, S.M. Ding, Mechanism of the influence of multi-scale pore structure on the triaxial mechanical properties of 3D printed concrete with recycled sand, Cement & Concrete Composites 152 (2024) 17. [Google Scholar]
  14. Y.W. Wu, C. Liu, G.L. Bai, H.W. Liu, Y.S. Meng, Z.H. Wang, 3D printed concrete with recycled sand: Pore structures and triaxial compression properties, Cement & Concrete Composites 139 (2023) 17. [Google Scholar]
  15. J.Q. Tong, Y.H. Ding, X.W. Lv, W. Ning, Effect of carbonated recycled coarse aggregates on the mechanical properties of 3D printed recycled concrete, Journal of Building Engineering 80 (2023) 18. [Google Scholar]
  16. Z.Y. Lv, J.Z. Xiao, Z.H. Duan, Y.X. Tang, Time-dependent evolution and strength modulation of 3D printed concrete pore structure based on microbial remediation, Journal of Building Engineering 79 (2023) 13. [Google Scholar]
  17. Q. Liu, H.L. Tang, K.L. Chen, B. Peng, C. Sun, A. Singh, J.B. Li, Utilizing CO2 to improve plastic shrinkage and mechanical properties of 3D printed mortar made with recycled fine aggregates, Construction and Building Materials 433 (2024) 15. [Google Scholar]
  18. H.R. Liu, J.Z. Xiao, T. Ding, Flexural performance of 3D-printed composite beams with ECC and recycled fine aggregate concrete: Experimental and numerical analysis, Engineering Structures 283 (2023) 15. [Google Scholar]
  19. C. Liu, Z.H. Wang, Y.W. Wu, H.W. Liu, T.G. Zhang, X. Wang, W. Zhang, 3D printing concrete with recycled sand: The influence mechanism of extruded pore defects on constitutive relationship, Journal of Building Engineering 68 (2023) 19. [Google Scholar]
  20. B.Y. Li, T. Ding, C.W. Qu, W. Liu, Modification of fresh and hardened properties of 3D-printed recycled mortar by superabsorbent polymers, Journal of Building Engineering 95 (2024) 15. [Google Scholar]
  21. Y.H. Ding, Y.Q. Zhang, Y. Zhao, M.X. Zhang, J.Q. Tong, L.L. Zhu, S.Q. Guo, Impact of pre-soaked lime water carbonized recycled fine aggregate on mechanical properties and pore structure of 3D printed mortar, Journal of Building Engineering 89 (2024) 17. [Google Scholar]
  22. J. De Vlieger, L. Boehme, J. Blaakmeer, J.B. Li, Buildability assessment of mortar with fine recycled aggregates for 3D printing, Construction and Building Materials 367 (2023) 10. [Google Scholar]
  23. Z.Y. Chen, S.T. Yang, Q. Liu, M.Q. Xu, S. Wang, T. Lan, Closed-form fracture model for evaluating crack resistance of 3D printed fiber-reinforced alkali-activated slag/fly ash recycled sand concrete, Journal of Building Engineering 86 (2024) 20. [Google Scholar]
  24. S. Zou, J.Z. Xiao, Z.H. Duan, T. Ding, S.D. Hou, On rheology of mortar with recycled fine aggregate for 3D printing, Construction and Building Materials 311 (2021) 10. [Google Scholar]
  25. N. Ducoulombier, R. Mesnil, P. Carneau, L. Demont, H. Bessaies-Bey, J.-F. Caron, N. Roussel, The “Slugs-test” for extrusion-based additive manufacturing: Protocol, analysis and practical limits, Cement and Concrete Composites 121 (2021). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.