Open Access
Issue
MATEC Web Conf.
Volume 409, 2025
Concrete Solutions 2025 – 9th International Conference on Concrete Repair, Durability & Technology
Article Number 03004
Number of page(s) 10
Section Non-Destructive Testing and Diagnosis
DOI https://doi.org/10.1051/matecconf/202540903004
Published online 13 June 2025
  1. Mehta, P. K., & Monteiro, P. J. M. Concrete: Microstructure, properties, and materials. (McGraw - Hill Education. 2013). [Google Scholar]
  2. Tuutti, K. Corrosion of steel in concrete. (CBI Research Institute, Stockholm. 1982). [Google Scholar]
  3. Elsener, B., Anderko, B., & Vennesland, Ø. Corrosion of steel in concrete—an electrochemical approach. In Corrosion of Steel in Concrete. (Wiley - VCH Verlag GmbH & Co. KGaA. b2008). [Google Scholar]
  4. ASTM D5162. Standard practice for visual inspection of reinforced concrete elements for corrosion - induced cracking. ASTM International. (2017). [Google Scholar]
  5. ASTM C1157/C1157M . Standard performance specification for hydraulic cements. ASTM International.(2023) [Google Scholar]
  6. ASTM G59 - 97. Standard practice for conducting potentiodynamic polarization resistance measurements. ASTM International.(2020) [Google Scholar]
  7. Ulaby, F. T., Moore, R. K., & Fung, A. K. Microwave remote sensing: Active and passive. (Addison - Wesley Publishing Company. 1986). [Google Scholar]
  8. Wahab A, Aziz M, Sam A, You K, Bhatti A, Kassim K. Review on microwave nondestructive testing techniques and its applications in concrete technology. Construction and Building Materials.;209:135-146. (2019) [CrossRef] [Google Scholar]
  9. Zoughi, R. Microwave and millimeter wave nondestructive testing: A succinct introduction. Res Nondestr Eval 7, 71–74 (1995). https://doi.org/10.1007/BF02538822 [CrossRef] [Google Scholar]
  10. Kim S, Surek J, Baker-Jarvis J. Electromagnetic Metrology on concrete and corrosion. Journal of Research of the National Institute of Standards and Technology ;116(3):655. (2011 May). 10.6028/jres.116.011 [CrossRef] [Google Scholar]
  11. Abosrra L, Ashour AF, Youseffi M. Corrosion of steel reinforcement in concrete of different compressive strengths. Construction and Building Materials ;25(10):3915–25. (2011 Jan 1) [CrossRef] [Google Scholar]
  12. Kong, J. A. Electromagnetic wave theory. (EMW Publishing. 2000). [Google Scholar]
  13. Belleri, A., & Graziani, G. Non - destructive testing of historical buildings: State - of - the - art and future trends. Journal of Cultural Heritage, 11(1), 1 - 9. (2010). [CrossRef] [Google Scholar]
  14. Li, X., & Huang, T. Advanced signal processing algorithms for microwave non - destructive testing. IEEE Transactions on Microwave Theory and Techniques, 63(9), 2827 - 2838. (2015). [Google Scholar]
  15. O’Connor, C., & Murray, A. Electromagnetic interference in microwave non - destructive testing of concrete. NDT & E International, 48, 1 - 8. (2012). [CrossRef] [Google Scholar]
  16. Nelson C, Stakenborghs R. Microwave ndt inspection techniques for power generation and specialty application: With increasing use of nonmetallic materials in a variety of power generation applications, new opportunities are driving research and development of microwave inspection technologies. Electronic Device Failure Analysis.;22(4):15–21. (2020 Sep) [Google Scholar]
  17. Frangopol, D. M., & Maute, K. Life - cycle reliability and sustainability of civil infrastructure systems. Structure and Infrastructure Engineering, 12(1), 1 - 4. (2016). [CrossRef] [Google Scholar]
  18. Chiniforush, A.A. et al. ‘Detecting the presence of chloride in hardened mortar using microwave non- destructive testing’, High Tech Concrete: Where Technology and Engineering Meet, pp. 83–90. doi:10.1007/978-3-319-59471-2_11. (2017) [Google Scholar]
  19. Zoughi, R., & Kharkovsky, S. Non-Destructive Testing of Physical Characteristics of Composite Structures, US7439749B2, (2008). [Google Scholar]
  20. Büyüköztürk, O., et al. System and method for detecting damage, defect, and reinforcement in fiber reinforced polymer bonded concrete systems using far-field radar, US7937229B2, (2011). [Google Scholar]
  21. Luukkonen, Olli & Maslovski, Stanislav & Tretyakov, Sergei. A Stepwise Nicolson–Ross– Weir-Based Material Parameter Extraction Method. IEEE Antennas and Wireless Propagation Letters - IEEE ANTENN WIREL PROPAG LETT. 10. 1295-1298. (2011). doi:10.1109/LAWP.2011.2175897. [CrossRef] [Google Scholar]
  22. G. F. Engen and C. A. Hoer, “Thru-Reflect-Line: An Improved Technique for Calibrating the Dual Six-Port Automatic Network Analyzer,” in IEEE Transactions on Microwave Theory and Techniques, vol. 27, no. 12, pp. 987-993, (Dec. 1979), doi: 10.1109/TMTT.1979.1129778. [CrossRef] [Google Scholar]
  23. Pozar DM. Microwave engineering, (David M. Pozar. Fourth edition. ed. Hoboken, N.J: Wiley; 2012.) [Google Scholar]
  24. James B-J, Michael J, Billy R, Robert J, Christopher H, Richard G, et al. Measuring the Permittivity and Permeability of Lossy Materials: Solids, Liquids, Metals, and negative-Index Materials. Technical Note [NIST TN], National Institute of Standards and Technology, Gaithersburg, MD; 2005. [Google Scholar]
  25. Zoughi R, Bakhtiari S. Microwave nondestructive detection and evaluation of disbonding and delamination in layered-dielectric slabs. IEEE Transactions on Instrumentation and Measurement.;39[6]:1059-63. (1990) [CrossRef] [Google Scholar]
  26. Bakhtiari S, Ganchev SI, Zoughi R. Open-ended rectangular waveguide for nondestructive thickness measurement and variation detection of lossy dielectric slabs backed by a conducting plate. IEEE Transactions on Instrumentation and Measurement.;42[1]:19-24. (1993) [CrossRef] [Google Scholar]
  27. Tiegoum Wembe J, Mambou Ngueyep LL, Elat Assoua Moukete E, Eslami J, Pliya P, Ndjaka J-MB, et al. Physical, mechanical properties and microstructure of concretes made with natural and crushed aggregates: Application in building construction. Cleaner Materials; 7:100173. 2023 [CrossRef] [Google Scholar]
  28. Institution TBS. BS 8500-1:2023 Concrete – Complementary British Standard to BS EN 206 – Part 1: Method of specifying and guidance for the specifier. Part 1: Method of specifying and guidance for the specifier. London: BSI Standards Limited; (2023) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.