EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 406 (2024) MATEC Web Conf., 406 (2024) 03013 References
Open Access
Issue
MATEC Web Conf.
Volume 406, 2024
2024 RAPDASA-RobMech-PRASA-AMI Conference: Unlocking Advanced Manufacturing - The 25th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, hosted by Stellenbosch University and Nelson Mandela University
Article Number 03013
Number of page(s) 17
Section Material Development
DOI https://doi.org/10.1051/matecconf/202440603013
Published online 09 December 2024
  1. H. Fouilloux, C. M. Thomas, Macromol. Rapid Commun., 42, 3, 2000530, (2021) [CrossRef] [Google Scholar]
  2. G. Chyr, J. M. DeSimone, Green Chem., 25, 2, 453-466, (2023) [CrossRef] [Google Scholar]
  3. S. Cousinet, A. Ghadban, E. Fleury, F. Lortie, J.-P. Pascault, D. Portinha, Eur. Polym. J., 67, 539-550, (2015) [CrossRef] [Google Scholar]
  4. Y. Wu, M. Fei, R. Qiu, W. Liu, J. Qiu, Polym., 11, 11, 1815, (2019) [CrossRef] [Google Scholar]
  5. M. Galià, L. M. de Espinosa, J. C. Ronda, G. Lligadas, V. Cádiz, Eur. J. Lipid Sci. Technol., 112, 1, 87-96, (2010) [CrossRef] [Google Scholar]
  6. M. R. Islam, M. D. H. Beg, S. S. Jamari, J. Appl. Polym. Sci., 131, 18, (2014) [Google Scholar]
  7. P. P. Kundu, R. Das, Biodeg. Biobased Polym. Environ. Biomed. Appl., 287-320, (2016) [Google Scholar]
  8. S. Miao, P. Wang, Z. Su, S. Zhang, Acta Biomater., 10, 4, 1692-1704, (2014) [CrossRef] [Google Scholar]
  9. R. Mustapha, A. R. Rahmat, R. Abdul Majid, S. N. H. Mustapha, Polym.-Plast. Technol. Mater., 58, 12, 1311-1326, (2019) [Google Scholar]
  10. S. N. H. Mustapha, A. R. Rahmat, A. Arsad, Rev. Chem. Eng., 30, 2, 167-182, (2014) [Google Scholar]
  11. S. Tan, W. Chow, Polym.-Plast. Technol. Eng., 49, 15, 1581-1590, (2010) [CrossRef] [Google Scholar]
  12. H. Inciarte, D. Echeverri, L. Rios, J. Appl. Polym. Sci., 135, 46, 46762, (2018) [Google Scholar]
  13. H. Esen, G. Çayli, Eur. J. Lipid Sci. Technol., 118, 6, 959-966, (2016) [CrossRef] [Google Scholar]
  14. E. Brister, W. Jarrett, S. F. Thames, J. Appl. Polym. Sci., 82, 8, 1850-1854, (2001) [Google Scholar]
  15. A. Campanella, J. J. L. Scala, R. Wool, J. Appl. Polym. Sci., 119, 2, 1000-1010, (2011) [Google Scholar]
  16. E. Can, R. Wool, S. Küsefoğlu, J. Appl. Polym. Sci., 102, 3, 2433-2447, (2006) [Google Scholar]
  17. E. Can, R. Wool, S. Küsefoğlu, J. Appl. Polym. Sci., 102, 2, 1497-1504, (2006) [Google Scholar]
  18. G. Çayli, D. Gürbüz, A. Çınarli, Eur. J. Lipid Sci. Technol., 121, 1, 1700189, (2019) [CrossRef] [Google Scholar]
  19. B. F. Dillman, N. Y. Kang, J. L. Jessop, J. Polym. Eng., 54, 7, 1768-1774, (2013) [Google Scholar]
  20. D. A. Echeverri, F. Jaramillo, L. A. Rios, J. Appl. Polym. Sci., 132, 4, (2015) [Google Scholar]
  21. D. A. Echeverri, W. A. Perez, L. A. Rios, Ind. Crops Prod., 49, 299-303, (2013) [CrossRef] [Google Scholar]
  22. S. Ghorui, N. Bandyopadhyay, D. Ray, S. Sengupta, T. Kar, Ind. Crops Prod., 34, 1, 893-899, (2011) [CrossRef] [Google Scholar]
  23. D. L. H. Maia, E. G. Alves Filho, A. F. Barros Junior, F. A. N. Fernandes, Int. J. Chem. Kinet., 50, 2, 112-121, (2018) [CrossRef] [Google Scholar]
  24. C. Liu, C. Wang, Y. Hu, F. Zhang, Q. Shang, W. Lei, Y. Zhou, Z. Cai, Prog. Org. Coat., 121, 236-246, (2018) [CrossRef] [Google Scholar]
  25. D. L. Maia, F. A. Fernandes, Braz. J. Chem. Eng., 35, 2, 699-708, (2018) [CrossRef] [Google Scholar]
  26. D. L. Maia, F. A. Fernandes, Macromol. React. Eng., 13, 5, 1900017, (2019) [CrossRef] [Google Scholar]
  27. D. L. Maia, F. A. Fernandes, Biorefinery, Biomass Conv., 1-10, (2018) [Google Scholar]
  28. P. Mazo, L. Rios, D. Estenoz, M. Sponton, Chem. Eng. J., 185, 347-351, (2012) [CrossRef] [Google Scholar]
  29. E. Mistri, S. Routh, D. Ray, S. Sahoo, M. Misra, Ind. Crops Prod., 34, 1, 900-906, (2011) [CrossRef] [Google Scholar]
  30. R. Müller, G. Wilke, J. Coat. Technol., 11, 6, 873-882, (2014) [CrossRef] [Google Scholar]
  31. J. S. Nelson, T. H. Applewhite, J. Am. Oil Chem. Soc. , 43, 9, 542-545, (1966) [CrossRef] [Google Scholar]
  32. N. R. Paluvai, S. Mohanty, S. Nayak, Int. J. Polym. Anal. Charact., 20, 4, 298-306, (2015) [CrossRef] [Google Scholar]
  33. N. R. Paluvai, S. Mohanty, S. Nayak, High Perform. Polym., 27, 8, 918-929, (2015) [CrossRef] [Google Scholar]
  34. N. R. Paluvai, S. Mohanty, S. K. Nayak, Can. J. Chem. Eng., 93, 12, 2107-2116, (2015) [CrossRef] [Google Scholar]
  35. R. N. Paluvai, S. Mohanty, S. Nayak, J. Reinf. Plast. Compos., 34, 18, 1476-1490, (2015) [CrossRef] [Google Scholar]
  36. D. Ray, S. Ghorui, N. Bandyopadhyay, S. Sengupta, T. Kar, Ind. Eng. Chem. Res., 51, 6, 2603-2608, (2012) [CrossRef] [Google Scholar]
  37. G. Sudha, H. Kalita, S. Mohanty, S. K. Nayak, Int. J. Polym. Anal. Charact., 22, 6, 519-525, (2017) [CrossRef] [Google Scholar]
  38. B. Vibhute, R. Khotpal, V. Y. Karadbhajane, A. Kulkarni, Int. J. Chemtech Res., 5, 4, 1886-1896, (2013) [Google Scholar]
  39. O. Kabasakal, F. Guner, A. Erciyes, Y. Yagci, JCT, Journal of coatings technology, 67, 841, 47-51, (1995) [Google Scholar]
  40. Z. Karami, M. Zohuriaan-Mehr, K. Kabiri, N. Ghasemi Rad, Polym. Renew. Resour., 10, 1-3, 27-44, (2019) [Google Scholar]
  41. C. Liu, J. Li, W. Lei, Y. Zhou, Ind. Crops Prod., 52, 329-337, (2014) [CrossRef] [Google Scholar]
  42. X. Mamat, Y. Wang, W. Eli, Polym. Adv. Technol., 23, 9, 1271-1275, (2012) [CrossRef] [Google Scholar]
  43. P. Mazo, D. Estenoz, L. Ríos, Lat. Am. Appl. Res., 41, 1, 11-15, (2011) [Google Scholar]
  44. P. Mazo, D. Estenoz, M. Sponton, L. Rios, J. Am. Oil Chem. Soc. , 89, 7, 1355-1361, (2012) [CrossRef] [Google Scholar]
  45. Y. M. Şahin, G. Çaylı, J. Çavuşoğlu, E. Tekay, S. Şen, Int. J. Polym. Sci., 2016, (2016) [Google Scholar]
  46. F. Song, H. Xia, P. Jia, M. Zhang, L. Hu, Y. Zhou, Pol. J. Chem. Technol., 20, 4, (2018) [Google Scholar]
  47. M. F. Valero, J. E. Pulido, Á. Ramírez, Z. Cheng, J. Am. Oil Chem. Soc. , 86, 4, 383-392, (2009) [CrossRef] [Google Scholar]
  48. D. A. Echeverri, F. Cardeño, L. A. Rios, J. Am. Oil Chem. Soc. , 88, 4, 551-557, (2011) [CrossRef] [Google Scholar]
  49. D. A. Echeverri, L. A. Rios, B. L. Rivas, Eur. Polym. J., 67, 428-438, (2015) [CrossRef] [Google Scholar]
  50. E. Can, S. Küsefoğlu, R. Wool, Journal of Applied Polymer Science, 81, 1, 69-77, (2001) [CrossRef] [Google Scholar]
  51. P. Li, S. Ma, J. Dai, X. Liu, Y. Jiang, S. Wang, J. Wei, J. Chen, J. Zhu, ACS Sus. Chem. Eng., 5, 1, 1228-1236, (2016) [Google Scholar]
  52. S. Pérocheau Arnaud, Synthesis and development of bio-based uv-curable monomers and highly branched polymers from itaconic acid, PhD, Fraunhofer- Institute for Wood Research, Technical University Carolo-Wilhelmina, Braunschweig, Germany, 2021. [Google Scholar]
  53. J. A. Dicks, C. Woolard, Polym., 13, 11, 1872, (2021) [CrossRef] [Google Scholar]
  54. J. C. De Carvalho, A. Magalhães, C. R. Soccol, Chem Today, 36, 56-8, (2018) [Google Scholar]
  55. H. Hajian, W. M. W. Yusoff, Curr. Res. J. Biol. Sci., 7, 2, 37-42, (2015) [CrossRef] [Google Scholar]
  56. A. Kuenz, S. Krull, Appl. Microbiol. Biotechnol., 102, 9, 3901-3914, (2018) [CrossRef] [Google Scholar]
  57. B. C. Saha, J. Ind. Microbiol. Biotech., 44, 2, 303-315, (2017) [CrossRef] [Google Scholar]
  58. M. Sano, T. Tanaka, H. Ohara, Y. Aso, Appl. Microbiol. Biotechnol., 104, 21, 9041-9051, (2020) [CrossRef] [Google Scholar]
  59. M. Sriariyanun, J. H. Heitz, P. Yasurin, S. Asavasanti, P. Tantayotai, Appl. Sci. Eng. Prog., 12, 2, 75-82, (2019) [Google Scholar]
  60. M. G. Steiger, N. Wierckx, L. M. Blank, D. Mattanovich, M. Sauer, “Itaconic acid—an emerging building block,” in Industrial biotechnology, C. Wittmann and J. C. Liao Eds. Weinheim, Germany: Wiley-VCH Verlag, 2017, ch. 15. [Google Scholar]
  61. T. Willke, K.-D. Vorlop, Appl. Microbiol. Biotechnol., 56, 3, 289-295, (2001) [CrossRef] [Google Scholar]
  62. M. Zhao, X. Lu, H. Zong, J. Li, B. Zhuge, Biotechnol. Lett., 40, 3, 455-464, (2018) [CrossRef] [Google Scholar]
  63. S. Kumar, S. Krishnan, S. K. Samal, S. Mohanty, S. K. Nayak, Polym. Int., 66, 10, 1349-1363, (2017) [CrossRef] [Google Scholar]
  64. A. I. Magalhães Jr, J. C. de Carvalho, J. F. Thoms, R. S. Silva, C. R. Soccol, Bioresour. Technol., 308, 123319, (2020) [CrossRef] [Google Scholar]
  65. M. Okabe, D. Lies, S. Kanamasa, E. Y. Park, Appl. Microbiol. Biotechnol., 84, 4, 597-606, (2009) [CrossRef] [Google Scholar]
  66. L. Sollka, K. Lienkamp, Macromol. Rapid Commun., 42, 4, 2000546, (2021) [CrossRef] [Google Scholar]
  67. B.-E. Teleky, D. C. Vodnar, Polym., 11, 6, 1035, (2019) [CrossRef] [Google Scholar]
  68. T. Robert, S. Friebel, Green Chem., 18, 10, 2922-2934, (2016) [CrossRef] [Google Scholar]
  69. S. Pérocheau Arnaud, E. Andreou, L. V. Pereira Köster, T. Robert, ACS Sus. Chem. Eng., (2019) [Google Scholar]
  70. J.-V. Richard, C. Delaite, G. Riess, A.-S. Schuller, Thermochim. Acta, 623, 136-143, (2016) [CrossRef] [Google Scholar]
  71. A. Matsumoto, S. Umehara, H. Watanabe, T. Otsu, J. Polym. Sci., Part B: Polym. Phys., 31, 5, 527-535, (1993) [CrossRef] [Google Scholar]
  72. D. Wang, J. Niu, Z. Wang, J. Jin, Langmuir, 31, 5, 1670-1674, (2015) [CrossRef] [Google Scholar]
  73. K. Tsujii, M. Hayakawa, T. Onda, T. Tanaka, Macromolecules, 30, 24, 7397-7402, (1997) [CrossRef] [Google Scholar]
  74. J. Ozawa, G. Matsuo, N. Kamo, K. Tsujii, Macromolecules, 39, 23, 7998-8002, (2006) [CrossRef] [Google Scholar]
  75. X.-S. Wang, Engineering, 3, 1, 50, (2011) [CrossRef] [Google Scholar]
  76. K. Naitoh, Y. Ishii, K. Tsujii, The Journal of Physical Chemistry, 95, 20, 7915-7918, (1991) [CrossRef] [Google Scholar]
  77. M. Ramos, Multi-component hydrophilic-hydrophobic systems from itaconic anhydride, PhD, University of Connecticut, 2002. [Google Scholar]
  78. M. Ramos, S. J. Huang, “Functional hydrophilic-hydrophobic hydrogels derived from condensation of polycaprolactone diol and poly(ethylene glycol) with itaconic anhydride,” in Functional condensation polymers, C. E. Carraher and G. G. Swift Eds. Boston, MA: Springer US, 2002, pp. 185-198. [CrossRef] [Google Scholar]
  79. T. Okuda, K. Ishimoto, H. Ohara, S. Kobayashi, Macromol., 45, 10, 4166-4174, (2012) [CrossRef] [Google Scholar]
  80. R. A. Prasath, S. Ramakrishnan, J. Polym. Sci., Part A: Polym. Chem., 43, 15, 3257-3267, (2005) [CrossRef] [Google Scholar]
  81. S. Chakraborty, S. G. Ramkumar, S. Ramakrishnan, Macromol., 50, 13, 5004-5013, (2017) [CrossRef] [Google Scholar]
  82. S. Chakraborty, S. Ramakrishnan, Langmuir, 34, 39, 11729-11737, (2018) [CrossRef] [Google Scholar]
  83. L. Michlovská, L. Vojtová, O. Humpa, J. Kučerík, J. Žídek, J. Jančář, RSC Adv., 6, 20, 16808-16816, (2016) [CrossRef] [Google Scholar]
  84. L. Michlovská, L. Vojtová, L. Mravcová, S. Hermanová, J. Kučerík, J. Jančář, Macromol. Symp., 295, 1, 119-124, (2010) [CrossRef] [Google Scholar]
  85. L. Michlovská, L. Vojtová, L. Mravcová, J. Jančár, Chall. Mod. Technol., 2, 1, 12-15, (2011) [Google Scholar]
  86. J. Oborna, L. Mravcova, L. Michlovska, L. Vojtova, M. Vavrova, EXPRESS Polym. Lett., 10, 5, 361, (2016) [CrossRef] [Google Scholar]
  87. R. Ouhichi, S. Pérocheau Arnaud, A. Bougarech, S. Abid, M. Abid, T. Robert, Appl. Sci., 10, 6, 2163, (2020) [CrossRef] [Google Scholar]
  88. S. Pérocheau Arnaud, N. M. Malitowski, K. Meza Casamayor, T. Robert, ACS Sus. Chem. Eng., 9, 50, 17142-17151, (2021) [CrossRef] [Google Scholar]
  89. L. Papadopoulos, L. Pezzana, N. M. Malitowski, M. Sangermano, D. N. Bikiaris, T. Robert, ACS Omega, 8, 34, 31009-31020, (2023) [CrossRef] [Google Scholar]
  90. L. Papadopoulos, N. M. Malitowski, D. Bikiaris, T. Robert, Eur. Polym. J., 186, 111872, (2023) [CrossRef] [Google Scholar]
  91. L. Papadopoulos, L. Pezzana, N. Malitowski, M. Sangermano, D. N. Bikiaris, T. Robert, Discover Applied Sciences, 6, 6, 290, (2024) [CrossRef] [Google Scholar]
  92. P. F. Jacobs, Rapid prototyping & manufacturing: Fundamentals of stereolithography. Soc. Manufact. Eng.,(1992). [Google Scholar]
  93. D. Kondos. “Table mountain” https://www.thingiverse.com/domonitor/designs. [Google Scholar]
  94. R. Daugherty. “Torture lattice" https://www.thingiverse.com/reddaugherty/designs. [Google Scholar]
  95. P. Ninja. “Super lattice printer torture test" https://www.thingiverse.com/pixelninja132/designs. [Google Scholar]
  96. GrAndAG. “Maneki-neko -lucky cat- (solid/filled)" https://www.thingiverse.com/grandag/designs. [Google Scholar]
  97. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials, ASTM D790-17, ASTM-International, West Conshohocken, PA, USA, 2017. [Google Scholar]
  98. Standard test method for tensile properties of plastics, ASTM D638-22, ASTM- International, West Conshohocken, PA, USA, 2022. [Google Scholar]
  99. Standard test method for rubber property—durometer hardness, ASTM D2240- 15, ASTM-International, West Conshohocken, PA, USA, 2015(2021). [Google Scholar]
  100. H. Mutlu, M. A. R. Meier, Eur. J. Lipid Sci. Technol., 112, 1, 10-30, (2010) [CrossRef] [Google Scholar]
  101. W. Rao, C. Cai, J. Tang, Y. Wei, C. Gao, L. Yu, J. Ding, Chin. J. Chem., 39, 7, 1965-1974, (2021) [CrossRef] [Google Scholar]
  102. J. Peyrton, L. Avérous, ACS Sus. Chem. Eng., 9, 13, 4872-4884, (2021) [CrossRef] [Google Scholar]
  103. T. J. Farmer, D. J. Macquarrie, J. W. Comerford, A. Pellis, J. H. Clark, J. Polym. Sci., Part A: Polym. Chem., 56, 17, 1935-1945, (2018) [CrossRef] [Google Scholar]
  104. D. M. Day, T. J. Farmer, J. Sherwood, J. H. Clark, Tetrahedron, 121, 132921, (2022) [CrossRef] [Google Scholar]
  105. "Rennovia enters piloting stage of its bio-based 1,6-hexanediol process", Bioplastics Magazine. https://www.bioplasticsmagazine.com/en/news/meldungen/20170329-Rennovia- takes-step-towards-commercialization-of-biobased-platform.php (accessed 2024). [Google Scholar]
  106. W. M. K. Siegu, L. D. W. Djouonkep, N. B. S. Selabi, E. M. Bonku, Z. Cheng, M. Gauthier, J. Polym. Environ., 31, 3, 1144-1159, (2023) [CrossRef] [Google Scholar]
  107. I. Schoon, M. Kluge, S. Eschig, T. Robert, Polym., 9, 12, 693, (2017) [CrossRef] [Google Scholar]
  108. K. Kowsari, B. Zhang, S. Panjwani, Z. Chen, H. Hingorani, S. Akbari, N. X. Fang, Q. Ge, Addit. Manuf., 24, 627-638, (2018) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.