EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 405 (2024) MATEC Web Conf., 405 (2024) 03005 References
Open Access
Issue
MATEC Web Conf.
Volume 405, 2024
1st International Conference on Advancements in Sustainable Energy, Materials, and Manufacturing Technology (ICASMMT 2024)
Article Number 03005
Number of page(s) 9
Section Mechanics
DOI https://doi.org/10.1051/matecconf/202440503005
Published online 25 October 2024
  1. V. Kumar Singh and A. Kumar Gautam, “Analysis of transmission line tower subjected to wind loading,” Mater. Today Proc., 65, 1739–1747, (2022). doi: https://doi.org/10.1016/j.matpr.2022.04.791. [CrossRef] [Google Scholar]
  2. C. Bhowmik and P. Chakraborti, “Analytical and Experimental Modal Analysis of Electrical Transmission Tower to Study the Dynamic Characteristics and Behaviors,” KSCE J. Civ. Eng., 24, no. 3, 931–942, (2020). doi: 10.1007/s12205-020-1563-3. [CrossRef] [Google Scholar]
  3. S. D. Shelare, K. R. Aglawe, S. N. Waghmare, and P. N. Belkhode, “Advances in water sample collections with a drone – A review,” Mater. Today Proc., 47, 4490–4494, (2021), doi: 10.1016/j.matpr.2021.05.327. [CrossRef] [Google Scholar]
  4. P. N. Belkhode et al., “Performance analysis of roof collector used in the solar updraft tower,” Sustain. Energy Technol. Assessments, 48, p. 101619, (2021), doi: 10.1016/j.seta.2021.101619. [CrossRef] [Google Scholar]
  5. M. Todd and D. Aaron, “Overhead Transmission Line Structure Selection,” in Electrical Transmission and Substation Structures 2022, in Proceedings. (2022). doi: doi:10.1061/9780784484463.010. [Google Scholar]
  6. S. Ambade et al., “Dissimilar welding of austenitic SS and ferritic SS in last decades,” Mater. Today Proc., May 2023, doi: 10.1016/j.matpr.2023.04.533. [Google Scholar]
  7. S. N. Waghmare, S. D. Shelare, S. Bahl, N. Mungle, A. Kumar Bagha, and R. Chandmal Sharma, “Structural design and its analysis of two station notching tool for industrial die,” Mater. Today Proc., 68, 1335–1341, (2022). doi: 10.1016/j.matpr.2022.06.360. [CrossRef] [Google Scholar]
  8. L. Sun, M. Trovato, and B. Stojadinović, “In-situ retrofit strategy for transmission tower structure members using light-weight steel casings,” Eng. Struct., 206, p. 110171, (2020). doi: https://doi.org/10.1016/j.engstruct.2020.110171. [CrossRef] [Google Scholar]
  9. V. Ambade, S. Rajurkar, G. Awari, B. Yelamasetti, and S. Shelare, “Influence of FDM process parameters on tensile strength of parts printed by PLA material,” Int. J. Interact. Des. Manuf., (2023). doi: 10.1007/s12008-023-01490-7. [Google Scholar]
  10. V. Fale, S. Shelare, and P. Khope, “State of the art of pressure regulators for industrial applications,” in AIP Conference Proceedings, (2023). doi: 10.1063/5.0163004. [Google Scholar]
  11. A. M. Taha, M. A. Dabaon, M. H. El-Boghdadi, and M. F. Hassanein, “Experimental testing and evaluation of real-scale lap-splice bolted connections used in typical lattice steel transmission towers,” Thin-Walled Struct., 171, p. 108790, (2022). doi: https://doi.org/10.1016/j.tws.2021.108790. [CrossRef] [Google Scholar]
  12. S. Waghmare, S. Shelare, K. Aglawe, and P. Khope, “A mini review on fibre reinforced polymer composites,” Mater. Today Proc., 54, (2022). doi: 10.1016/j.matpr.2021.10.379. [Google Scholar]
  13. B. Yelamasetti, S. S. N, K. K. Saxena, N. Gupta, N. K. P, and S. D. Shelare, “Metallurgical, mechanical and corrosion behavior of Interpulse and pulsed current TIG dissimilar welds of Monel 400 and AISI 316L,” Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., p. 09544089231216029, (2023). doi: 10.1177/09544089231216029. [CrossRef] [Google Scholar]
  14. B. Yelamasetti et al., “Comparative Studies on Mechanical Properties and Microstructural Changes of AA5052 and AA6082 Dissimilar Weldments Developed by TIG, MIG, and FSW Techniques,” J. Mater. Eng. Perform., Jul. 2024, doi: 10.1007/s11665-024-09867-9. [Google Scholar]
  15. B. Menaka and V. Kumar, “Analytical Study on Static Behaviour of a Transmission Tower Line Systems,” J. Phys. Conf. Ser., 2040, no. 1, p. 12023, (2021). doi: 10.1088/1742-6596/2040/1/012023. [CrossRef] [Google Scholar]
  16. K. R. Aglawe, M. Dhande, M. Matey, and S. Shelare, “State of the art and materials based characteristics in power converters for electric vehicles,” Mater. Today Proc., 58, 726–735, (2022) doi: 10.1016/j.matpr.2022.02.384. [CrossRef] [Google Scholar]
  17. S. D. Shelare, K. R. Aglawe, S. S. Giri, and S. N. Waghmare, “Additive Manufacturing of Polymer Composites : Applications , Challenges and opportunities,” Indian J. Eng. Mater. Sci., 30, no. December, 872–881, 2023, doi: 10.56042/ijems.v30i6.4490. [Google Scholar]
  18. G. Yong, D. Gangping, D. Fuping, G. Xiaofeng, Z. Dachang, and K. Bill, “380 m Ultra Long Span Crossing Tower: Design, Fabrication, and Construction,” in Electrical Transmission and Substation Structures 2022, in Proceedings. (2022). doi: doi:10.1061/9780784484463.004. [Google Scholar]
  19. A. Gupta et al., “A comparative study of the impact on combustion and emission characteristics of nanoparticle‐based fuel additives in the internal combustion engine,” Energy Sci. Eng., (2023) doi: 10.1002/ese3.1614. [Google Scholar]
  20. K. Aglawe, S. Giri, M. Dhande, and S. Shelare, “Application of aluminum alloys in aviation industry: A review,” in AIP Conference Proceedings, (2023). doi: 10.1063/5.0163002. [Google Scholar]
  21. C. Pawar et al., “Machine Learning-Based Assessment of the Influence of Nanoparticles on Biodiesel Engine Performance and Emissions: A critical review,” Arch. Comput. Methods Eng., (2024). doi: 10.1007/s11831-024-10144-0. [Google Scholar]
  22. S. N. Waghmare, S. D. Shelare, N. P. Mungle, and K. R. Aglawe, “Development of IOT-Based Hybrid Helium Drone for Flight Time Enhancement,” in Proceedings of International Conference on Intelligent Manufacturing and Automation. Lecture Notes in Mechanical Engineering, H. Vasudevan, V. K. N. Kottur, and A. A. Raina, Eds., Singapore: Springer Nature Singapore, (2023). doi: 10.1007/978-981-197971-2_32. [Google Scholar]
  23. S. D. Shelare, S. N. Waghmare, M. M. Yenurkar, and G. R. Jodh, “Experimental Analysis of Sprayer for Horticulture and Orchards,” in Proceedings of International Conference on Intelligent Manufacturing and Automation. Lecture Notes in Mechanical Engineering. Springer, H. Vasudevan, V. K. N. Kottur, and A. A. Raina, Eds., Singapore: Springer Nature Singapore, (2023). pp. 651–660. doi: 10.1007/978-981-19-7971-2_64. [Google Scholar]
  24. S. D. Shelare, K. R. Aglawe, and P. B. Khope, “Computer aided modeling and finite element analysis of 3-D printed drone,” Mater. Today Proc., 47, pp. 3375–3379, (2021). doi: 10.1016/j.matpr.2021.07.162. [CrossRef] [Google Scholar]
  25. S. Shelare, P. Belkhode, K. C. Nikam, B. Yelamasetti, and T. Gajbhiye, “A payload based detail study on design and simulation of hexacopter drone,” Int. J. Interact. Des. Manuf., (2023). doi: 10.1007/s12008-023-01269-w. [Google Scholar]
  26. S. Shelare, R. Kumar, T. Gajbhiye, and S. Kanchan, “Role of Geothermal Energy in Sustainable Water Desalination—A Review on Current Status, Parameters, and Challenges,” Energies, 16, no. 6, p. 2901, (2023). doi: 10.3390/en16062901. [CrossRef] [Google Scholar]
  27. S. D. Shelare, R. Kumar, and P. B. Khope, “Flywheel Energy Application in Commercial and Agricultural Field: A Typical Review,” in Lecture Notes in Mechanical Engineering, Springer, (2021). pp. 177–186. doi: 10.1007/978-981-161079-0_19. [Google Scholar]
  28. A. L. Ramteke, S. N. Waghmare, S. D. Shelare, and P. M. Sirsat, “Development of Sheet Metal Die by Using CAD and Simulation Technology to Improvement of Quality BT Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020),” R. Pratap Singh, D. M. Tyagi, D. Panchal, and J. P. Davim, Eds., Cham: Springer International Publishing, (2022). [Google Scholar]
  29. K. S. Reddy, H. Vemanaboina, B. V. V. Naidu, B. Yelamasetti, P. Bridjesh, and S. D. Shelare, “Minimizing distortion in multi-pass GTAW welding of SS316L structures: a Taguchi approach,” Int. J. Interact. Des. Manuf., (2023) doi: 10.1007/s12008-023-01512-4. [Google Scholar]
  30. B. Yelamasetti et al., “Optimization of TIG welding process parameters using Taguchi technique for the joining of dissimilar metals of AA5083 and AA7075,” Sci. Rep., 14, no. 1, p. 23694, (2024) doi: 10.1038/s41598-024-74458-6. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.