Open Access
Issue
MATEC Web Conf.
Volume 405, 2024
1st International Conference on Advancements in Sustainable Energy, Materials, and Manufacturing Technology (ICASMMT 2024)
Article Number 03004
Number of page(s) 10
Section Mechanics
DOI https://doi.org/10.1051/matecconf/202440503004
Published online 25 October 2024
  1. P. Kyoungwoo, Park-Kyoun oh, Hyo-Jae Lim, The application of the CFD and Kriging method to an optimization of heat sink. Int. J. Heat Mass Transf. 49, 3439–3447, (2006). [CrossRef] [Google Scholar]
  2. S. Ndao, Y. Peles, M.-K. Jenson, Multi-objective thermal design optimization and comparative analysis of electronics cooling technologies. Int. J. Heat Mass Transf. 52, 4317–4326, (2009). [CrossRef] [Google Scholar]
  3. S.-C. Fok, W. Shen, F.-L. Tan, Cooling of portable hand-held electronic devices using phase change materials in finned heat sinks. Int. J. Therm. Sci. 49, 109–117, (2009). [Google Scholar]
  4. D. Kim, J. Jung S. Kim, Thermal optimization of plate-fin heat sinks with variable fin thickness. Int. J. Heat Mass Transf. 53, 5988–5995, (2010). [CrossRef] [Google Scholar]
  5. P. Anhoto, A. Reis, Optimization of forced convection heat sinks with pumping power requirements. Int. J. Heat Mass Transf. 54 (2011) 1441–1447, (2010). [CrossRef] [Google Scholar]
  6. R. Mohan, P. Govindrajan, Thermal analysis of CPU with Composite pin fin heat sinks. IJEST. 12, 4051–4062, (2010). [Google Scholar]
  7. S. Mahmoud, R. Al-Dadah, D.-K. Aspinwall, S.-L. Soo, H. Hemida, Effect of micro fin geometry on natural convection heat transfer of horizontal microstructures. Appl. Therm. Eng. 31, 627–633, (2011). [CrossRef] [Google Scholar]
  8. A. Koga, C. Edson, H. Nova, C. Lima, E. Silva, Development of heat sink by using optimization. Int. J. Heat Mass Transf. 64, 759–722, (2013). [CrossRef] [Google Scholar]
  9. C. Tsong, H. Chen, Multiobjective optimization design of plate fin heat sink using a direction based genetic algorithm. J. Taiwan Inst. Chem. Eng. 44, 257–265, (2013). [CrossRef] [Google Scholar]
  10. Lin Lin, Yang Yang Chen, Optimization of geometry and flow rate distribution for double layer micro channel heat sink. Int. J. Therm. Sci. 78, 158168, (2014). [Google Scholar]
  11. A. Aishwarya Patil, S.-G. Dambhare, The impact of split distance on pin-fins over natural convection heat transfer enhancement. Int. J. Eng. Res. 320–328, (2016). [Google Scholar]
  12. Hakan Oztop, Lioua Kolsi, Abdulaziz Alghamdi, Nidal Abu-Hamdeh, Mohamed Naceur Borjini, Habib Ben Aissia, Numerical analysis of entropy generation due to natural convection in threedimensional partially open enclosures. J. Taiwan Inst. Chem. Eng. 1–10, (2017). [Google Scholar]
  13. Matthew B. de Stadler., Optimization of the geometry of a heat sink, University of Virginia, Charlottesville, VA 22904, 42, 270–276, (2023). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.