Open Access
| Issue |
MATEC Web Conf.
Volume 405, 2024
1st International Conference on Advancements in Sustainable Energy, Materials, and Manufacturing Technology (ICASMMT 2024)
|
|
|---|---|---|
| Article Number | 02001 | |
| Number of page(s) | 8 | |
| Section | Materials Science | |
| DOI | https://doi.org/10.1051/matecconf/202440502001 | |
| Published online | 25 October 2024 | |
- Fande A, Kalbande V, Kavishwar S, Tandon V, Dhunde A. Enhancing microstructure and mechanical properties of dissimilar TIG welded duplex 2205 and Ni-based inconel 718 superalloy through post weld heat treatment. Eng. Res. Express. (2024). [Google Scholar]
- Kumar MB, Arivazhagan N, Tofil S, Andersson J, Kozak J, Manikandan M. Influence of pulsed current GTAW-WAAM process parameters on the single layer bead geometry and multi bead multi-layer deposition of a nickel-based superalloy. Mater. Today Commun. 39, 108824 (2024). https://doi.org/10.1016/j.mtcomm.2024.108824 [CrossRef] [Google Scholar]
- Yelamasetti B, N SS, Saxena KK, Gupta N, P NK, Shelare SD. Metallurgical, mechanical and corrosion behavior of Interpulse and pulsed current TIG dissimilar welds of Monel 400 and AISI 316L. Proc. Inst. Mech. Eng. E J. Process Mech. Eng. (2023). https://doi.org/10.1177/09544089231216029 [Google Scholar]
- Reddy KS, Vemanaboina H, Naidu BV, Yelamasetti B, Bridjesh P, Shelare SD. Minimizing distortion in multi-pass GTAW welding of SS316L structures: a Taguchi approach. Int. J. Interact. Des. Manuf. (2023). https://doi.org/10.1007/s12008-023-01512-4 [Google Scholar]
- Ramkumar KD, Sidharth Dev, Phani Prabhakar KV, Rajendran R, Giri Mugundan K, Narayanan S. Microstructure and properties of Inconel 718 and AISI 416 laser welded joints. J Mater Process Technol. 266, 52–62 (2019). [CrossRef] [Google Scholar]
- Yelamasetti B, Karuna BN, Vishnu Vardhan T, Dasore A, Saxena KK, Faroque FA, Revathi V, Abduvalieva D. Mechanical and micro-structural studies of pulsed and constant current TIG weldments of super duplex stainless steels and Austenitic stainless steels. High Temp. Mater. Process. 43(1), 0003 (2024). https://doi.org/10.1515/htmp-2024-0003 [CrossRef] [Google Scholar]
- Yelamasetti, B., Adithya, G. S., Ramadevi, R. S., Sonia, P., Saxena, K. K., Kumar P, N., Eldin, S. M., & Al-kafaji, F. H. K. Metallurgical, mechanical and corrosion behaviour of pulsed and constant current TIG dissimilar welds of AISI 430 and Inconel 718. J. Mater. Res. Technol. 24, 6652–6664 (2023) https://doi.org/10.1016/J.JMRT.2023.04.231. [CrossRef] [Google Scholar]
- Kumar KS, Arivazhagan N. An innovative pulsed current arc welding technology for armor steel: Processes, microstructure, and mechanical properties. Mater. Today Commun. 38, 108237 (2024). https://doi.org/10.1016/j.mtcomm.2024.108237 [CrossRef] [Google Scholar]
- Ioannidou D, Foinikaridis M, Deligiannis S, Tsakiridis PE. Microstructural Evaluation of Inconel 718 and AISI 304L Dissimilar TIG Joints. Metals. 14(1), 54 (2023). https://doi.org/10.3390/met14010054 [CrossRef] [Google Scholar]
- Alomairi BS, Driss Z, Abood AN. Microstructural evaluation of welded joints of ASTM Mar-M247 superalloy using ERNiCrMo-3 filler alloy. Matéria (Rio de Janeiro). 29, (2024). https://doi.org/10.1590/1517-7076-RMAT-2023-0219 [Google Scholar]
- Prabu SS, Muthu SM, Sujai S, Ramkumar KD, Beemkumar N, Kariappan E. Failure Assessment and High-Temperature Corrosion Behavior of Inconel 625 Welds in Simulated K2SO4+ 60% NaCl Boiler Environment. J. Mater. Eng. Perform. 32, 11024–11039 (2023). https://doi.org/10.1007/s11665-023-07923-4 [CrossRef] [Google Scholar]
- Yelamasetti, B., Karuna, B. N. R., Vishnu Vardhan, T., Dasore, A., Saxena, K. K., Faroque, F. A., Revathi, V., & Abduvalieva, D. Mechanical and micro-structural studies of pulsed and constant current TIG weldments of super duplex stainless steels and Austenitic stainless steels. High Temp. Mater. Process, 43, (2024). https://doi.org/10.1515/htmp-2024-0003 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.