Open Access
Issue
MATEC Web Conf.
Volume 403, 2024
SUBLime Conference 2024 – Towards the Next Generation of Sustainable Masonry Systems: Mortars, Renders, Plasters and Other Challenges
Article Number 07009
Number of page(s) 17
Section Conservation, Repair and Strengthening
DOI https://doi.org/10.1051/matecconf/202440307009
Published online 16 September 2024
  1. J. Balažic, Older layers of wall paintings in Prekmurje, Proceedings of the Pomurje Museum, 2, 13-26 (1991/92) [Google Scholar]
  2. J. Höfler, Medieval Frescoes in Slovenia, Book IV, Eastern Slovenia, (Ljubljana, 2004) [Google Scholar]
  3. A. Križnar, The younger layer of the rotunda painting in Selo in Prekmurje, diploma thesis, University of Ljubljana (1998) [Google Scholar]
  4. M. Zadnikar, Romanesque rotunda in Selo and its restoration, Journal for the Protection of Monuments 12, 167 (1979) [Google Scholar]
  5. M. Zadnikar, M. Šubic, Journal for the Protection of Monuments Reports 6, 106-109 (1955-57) [Google Scholar]
  6. N. Štupar-Šumi, Reconstruction of the Romanesque Rotunda in Selo, Journal for the Protection of Monuments 12, 173 (1979) [Google Scholar]
  7. B. Kovačič, Journal for the Protection of Monuments Reports 15, 303 (193) [Google Scholar]
  8. A. Padovnik, I. Čuk, The Beginning of the Restoration of the Wall Paintings in the Rotunda of St. Nicholas in Selo in Proceedings of the Conservator - Restorer, Abstracts of the International Professional Meeting, National Gallery, Ljubljana, 104 (2018) [Google Scholar]
  9. K. Zajadacz, S. Simon, Grouting of architectural surfaces – the challenge of testing, in International Seminar Theory and Practice in Conservation, LNEC, Lisbon, Portugal, 509,, 516 (2006) [Google Scholar]
  10. M. R. Veiga, Conservation of Historic Renders and Plasters: From Laboratory to Site, in Historic Mortars, Characterisation, Assessment and Repair, Dordrecht, Netherlands, 207–225 (2012) [Google Scholar]
  11. B. Biçer-Şimşir, I. Griffin, B. Palazzo-Bertholon, L. Rainer, Lime-based injection grouts for the conservation of architectural surfaces, Stud Conserv 54, 3–17 (2009). https://doi.org/10.1179/sic.2009.54.Supplement-1.3 [Google Scholar]
  12. L.C. Azeiteiro, A. Velosa, H. Paiva, P.Q. Mantas, V.M. Ferreira, R. Veiga, Development of grouts for consolidation of old renders, Constr Build Mater 50, 352–360 (2014). https://doi.org/10.1016/J.CONBUILDMAT.2013.09.006 [CrossRef] [Google Scholar]
  13. EN 1771. Products and Systems for the Protection and Repair of Concrete Structures, Test Methods—Determination of Injectability and Splitting Test; CEN: Brussels, Belgium, (2004). [Google Scholar]
  14. UNI EN 459-1. Building Lime - Part 1: Definitions, Specifications and Conformity Criteria; CEN: Brussels, Belgium, (2010). [Google Scholar]
  15. A. Padovnik, F. Piqué, A. Jornet, V. Bokan-Bosiljkov, Injection Grouts for the Re-Attachment of Architectural Surfaces with Historic Value—Measures to Improve the Properties of Hydrated Lime Grouts in Slovenia., Int J Archit Herit 10, 993–1007 (2016). https://doi.org/10.1080/15583058.2016.1177747 [CrossRef] [Google Scholar]
  16. A. Padovnik, V. Bokan-Bosiljkov, Effect of Ultralight Filler on the Properties of Hydrated Lime Injection Grout for the Consolidation of Detached Historic Decorative Plasters, Materials 13, 3360 (2020). https://doi.org/10.3390/ma13153360 [CrossRef] [Google Scholar]
  17. EN 1015-6. Methods of Test for Mortar for Masonry, Part 6: Determination of Bulk Density of Fresh Mortar; CEN: Brussels, Belgium (1999) [Google Scholar]
  18. PrEN 1015-8. Methods of Test for Mortar for Masonry, Part 8: Determination of Water Retentivity of Fresh Mortar; CEN: Brussels, Belgium (1999) [Google Scholar]
  19. EN 445. Grout for prestressing tendons - Test methods; CEN: Brussels, Belgium, (2007) [Google Scholar]
  20. P. Domone, C. Hsi-Wen, Testing of binders for high performance concrete, Cem Concr Res 27, 1141–1147 (1997). https://doi.org/10.1016/S0008-8846(97)00107-5 [CrossRef] [Google Scholar]
  21. UNI EN 459-2. Building lime - Part 2: Test methods; CEN: Brussels, Belgium (2010) [Google Scholar]
  22. SIA 262 1. Construction En Béton-Spécifications Complémentaires, Appendix A; SIA: Zurich, Switzerland, (2003). [Google Scholar]
  23. A. Padovnik, V. Bokan Bosiljkov, Adhesive-strength assessment of lime injection grout using standardised and modified test methods, MatTech 56, 587–593 (2022). https://doi.org/10.17222/mit.2022.609 [Google Scholar]
  24. EN 1015-10. Methods of Test for Mortar for Masonry, Part 10: Determination of Dry Bulk Density of Hardened Mortar; CEN: Brussels, Belgium (1999) [Google Scholar]
  25. ASTM C496/C496M-1. Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens; ASTM International: Harrisburg, PA, USA (2004) [Google Scholar]
  26. EN 1015-12. Methods of Test for Mortar for Masonry—Part 12: Determination of Adhesive Strength of Hardened Rendering and Plastering Mortars on Substrates; CEN: Brussels, Belgium, Belgium (2001) [Google Scholar]
  27. D. Ferragni, M. Forti, J. Malliet, P. Mora, J.M. Teutonico, G. Torraca, Injection grouting of mural paintings and mosaics, Stud Conserv 29, 110–116 (1984). https://doi.org/10.1179/sic.1984.29.Supplement-1.110 [CrossRef] [Google Scholar]
  28. M. Uranjek, V. Bokan-Bosiljkov, Influence of freeze–thaw cycles on mechanical properties of historical brick masonry, Constr Build Mater 84, 416–428 (2015). https://doi.org/10.1016/J.CONBUILDMAT.2015.03.077 [CrossRef] [Google Scholar]
  29. M. Tavares, M. do Rosário Veiga, A. Fragata, Grouting mortars for consolidation of historical renders showing loss of adhesion, In: 2nd Historic Mortars Conference, EM TC 203-RHM Final Workshop, Prague, Czech Republic, September 22-24, 743-752 (2010) [Google Scholar]
  30. P. Mora, L. Mora and P. Philippot, Conservation of wall paintings (UK: Butterworths, London, 1984) [Google Scholar]
  31. C. Pasian, F. Piqué, A. Jornet, Non-structural injection grouts with reduced water content: Changes induced by the partial substitution of water with alcohol. STUD CONSERV, 62(1), 43–54 (2016). https://doi.org/10.1179/2047058415Y.0000000022 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.