EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 403 (2024) MATEC Web Conf., 403 (2024) 05006 References
Open Access
Issue
MATEC Web Conf.
Volume 403, 2024
SUBLime Conference 2024 – Towards the Next Generation of Sustainable Masonry Systems: Mortars, Renders, Plasters and Other Challenges
Article Number 05006
Number of page(s) 10
Section Structural and Functional Performance
DOI https://doi.org/10.1051/matecconf/202440305006
Published online 16 September 2024
  1. K. Gourav, B. V. V. Reddy, Out-of-plane flexure behaviour of fly ash-lime-gypsum brick masonry walls. Eng. Struct. 173, 241–250 (2018) https://doi.org/10.1016/j.engstruct.2018.06.114 [CrossRef] [Google Scholar]
  2. F. Yavartanoo, T. Kim, J. Kim, H. Jang, C.-S. Kim, Out-of-plane behavior of U-shaped unreinforced masonry structures. J. Build. Eng. 86, 108984 (2024) https://doi.org/10.1016/j.jobe.2024.108984 [CrossRef] [Google Scholar]
  3. F. J. Crisafulli, Seismic behaviour of reinforced concrete structures with masonry infills, Ph. D. thesis, University of Canterbury, Civil Engineering (1997) [Google Scholar]
  4. Brick industry Association, Technical Notes 3A - Brick Masonry Material Properties. (1992) [Google Scholar]
  5. S. Jafari, Material characterisation of existing masonry: A strategy to determine strength, stiffness and toughness properties for structural analysis, Ph. D. thesis, Delft University of Technology (2021) [Google Scholar]
  6. Z. Zhou, P. Walker, D. D’Ayala, Strength characteristics of hydraulic lime mortared brickwork. Proc. Inst. Civ. Eng. Mater. 161, 139–146 (2008) [Google Scholar]
  7. A. Costigan, S. Pavía, Compressive, flexural and bond strength of brick/lime mortar masonry, in Proceedings of PROHITEC-09 conference, Rome, Italy, June 21-24 (2009) [Google Scholar]
  8. C. Shermi, R. N. Dubey, Study on out-of-plane behaviour of unreinforced masonry strengthened with welded wire mesh and mortar. Constr. Build. Mater. 143, 104–120 (2017) https://doi.org/10.1016/j.conbuildmat.2017.03.002 [CrossRef] [Google Scholar]
  9. M. Ramesh, M. Parente, M. Azenha, P. B. Lourenço, Influence of lime on strength of structural unreinforced masonry: toward improved sustainability in masonry mortars, Sustainability. 15, 15320 (2023) https://doi.org/10.3390/su152115320 [Google Scholar]
  10. F. Akhoundi, G. Vasconcelos, P. Lourenço, Experimental out-of-plane behavior of brick masonry infilled frames. Int. J. Archit. Herit. 14 221-237 (2018) https://doi.org/10.1080/15583058.2018.1529207 [Google Scholar]
  11. A. Furtado, H. Rodrigues, A. Arêde, H. Varum, Mechanical properties characterization of different types of masonry infill walls. Front. Struct. Civ. Eng. 14, 411–434 (2020) https://doi.org/10.1007/s11709-019-0602-y [CrossRef] [Google Scholar]
  12. European Committee for Standardization (CEN) EN 1052-2: Methods of test of masonry – part 2: determination of flexural strength. Brussels, Belgium (1999) [Google Scholar]
  13. M. Ramesh, C. Briceño, M. Azenha, P. B. Lourenço, Impact of type of mortar on shear bond strength of brick masonry, in Proceedings of the International Brick and Block Masonry Conference, London, United Kingdom, July 5-8 (2020) [Google Scholar]
  14. C. Briceño, M. Ramesh, G. Vasconcelos, M. Azenha, P. B. Lourenço, Influence of lime in mortar on strength and stiffness of brick masonry, in Proceedings of the Reabilitar & Betao Estrutural 2020, Lisbon, Portugal, November 3-5 (2021) [Google Scholar]
  15. C. Briceño, M. Azenha, G. Vasconcelos, P. B. Lourenço, Influence of conditioning of clay bricks over shear strength of brick masonry. J. Build. Eng. 82, 108138 (2024) https://doi.org/10.1016/j.jobe.2023.108138 [CrossRef] [Google Scholar]
  16. European Committee for Standardization (CEN), EN 196-1: Methods of testing cement. Determination of strength. Brussels, Belgium (2005) [Google Scholar]
  17. European Committee for Standardization (CEN), EN 1996-1-1:2022 - Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures. Brussels, Belgium (2022) [Google Scholar]
  18. European Committee for Standardization (CEN), EN 1015-11:1999 Methods of Test for Mortar for Masonry, Part 11: Determination of Flexural and Compressive Strength of Hardened Mortar. Brussels, Belgium (2007) [Google Scholar]
  19. British Standards Institution, BS 4551 : 2005, Mortar-Methods of test for mortar and screed-Chemical analysis and physical testing. London, United Kingdom (2005) [Google Scholar]
  20. European Committee for Standardization (CEN), EN 772-1: 2000 Methods of test for masonry units. Determination of compressive strength. Brussels, Belgium (2000) [Google Scholar]
  21. European Committee for Standardization (CEN), EN 772-11 Methods of test for masonry units: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay. Brussels, Belgium (2011) [Google Scholar]
  22. M. Ramesh, A multi-scale approach to the lime-cement mortars in masonry, Ph. D. thesis, Universidade do Minho (2021) [Google Scholar]
  23. British Standards Institution, BS EN 1996-1-1 2005+A1:2015/ NA:2013 British National Annex – Nationally determined parameters – Eurocode 6: Design of masonry structures – Part 1-1: General rules for reinforced and unreinforced masonry. London, United Kingdom (2013) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.