EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 402 (2024) MATEC Web Conf., 402 (2024) 01004 References
Open Access
Issue
MATEC Web Conf.
Volume 402, 2024
The 4th International Conference on Engineering, Technology, and Innovative Researches (The 4th ICETIR 2022)
Article Number 01004
Number of page(s) 5
Section Mechanical and Industrial Engineering
DOI https://doi.org/10.1051/matecconf/202440201004
Published online 23 August 2024
  1. Singh P, Jain O, Yadav P, Nikhil and Sharma S K 2021 Analysing Crane Hook of Different Cross Sections and Different Materials Recent Advances in Mechanical Engineering ed M Muzammil, A Chandra, P K Kankar and H Kumar (Singapore: Springer Singapore) pp 575–80 [Google Scholar]
  2. Ji Y, Wang H, Chen H Q, Guo M X and Wu J J 2019 Shape Optimization of Hook for Marine Crane J Phys Conf Ser 1187 [Google Scholar]
  3. Ansari O A and Rao P S 2016 Design and analysis of crane hook for load conditions Int J Mech Eng Technol 7 75–9 [Google Scholar]
  4. Molnár D, Blatnický M and Dižo J 2021 Design and Strength Analysis of a Crane Hook With a 500 Kg Lifting Capacity Perner’s Contacts 16 [Google Scholar]
  5. Wibawa L A N and Tuswan 2022 Lightweight Optimization Design of Thin-Walled Cylindrical Rocket Motor Tube Using FEA AIP Conf Proc 2590 [Google Scholar]
  6. Godara S S, Brenia V, Soni A K, Singh Shekhawat R and Saxena K K 2022 Design & analysis of connecting rod using ANSYS software Mater Today Proc 56 1896–903 [Google Scholar]
  7. Dagar N, Sharma R, Lal Rinawa M, Gupta S, Chaudhary V and Gupta P 2022 Design and analysis of piston using aluminum alloy and composites in Solidworks and Ansys Mater Today Proc 67 784–91 [Google Scholar]
  8. Wibawa L A N and Setiadi S 2022 The Effect of Load Variations and Thread Types on the Joint Strength of the Rocket Cap and Tube Using Finite Element Method AIP Conf Proc 2590 [Google Scholar]
  9. Alshoaibi A M and Ali Fageehi Y 2022 3D modelling of fatigue crack growth and life predictions using ANSYS Ain Shams Eng J 13 101636 [Google Scholar]
  10. Agrawal A P, Ali S and Rathore S 2022 Finite element stress analysis for shape optimization of spur gear using ANSYS Mater Today Proc 64 1147–52 [Google Scholar]
  11. Chourasia K and Joladarashi S 2022 Modelling, static and dynamic analysis of offset bearing using ANSYS Mater Today Proc 66 2124–32 [Google Scholar]
  12. Wibawa L A N and Tuswan T 2022 Effect of Cylinder Length on The Ratio of Safety Factor and Weight of Rocket Motor Tube Using Thin-Walled Cylinder AIP Conf Proc 2590 [Google Scholar]
  13. Rettenmeier P, Roos E, Weihe S and Schuler X 2016 Assessment of mixed mode crack propagation of crane runway girders subjected to cyclic loading Eng Fract Mech 153 11–24 [Google Scholar]
  14. Zhao X, Jin N, Liu X and Shi Z 2022 Fatigue failure analysis of steel crane beams with variablesection supports Eng Fail Anal 136 106217 [Google Scholar]
  15. Domazet Ž, Lukša F and Bugarin M 2014 Failure of two overhead crane shafts Eng Fail Anal 44 125–35 [CrossRef] [Google Scholar]
  16. Torkar M and Arzenšek B 2002 Failure of crane wire rope Eng Fail Anal 9 227–33 [CrossRef] [Google Scholar]
  17. Guerra-Fuentes L, Torres-López M, HernandezRodriguez M A L and Garcia-Sanchez E 2020 Failure analysis of steel wire rope used in overhead crane system Eng Fail Anal 118 104893 [Google Scholar]
  18. Wibawa L A N 2021 Effect of Bolt Hole Size on Static Stress and Fatigue Life of UAV Main Landing Gear Using Numerical Simulation J Phys Conf Ser 1811 [Google Scholar]
  19. Wibawa L A N, Diharjo K, Raharjo W W and Jihad B H 2020 Stress Analysis of Thick-Walled Cylinder for Rocket Motor Case under Internal Pressure J Adv Res Fluid Mech Therm Sci 70 106–15 [Google Scholar]
  20. Ashcroft I A and Mubashar A 2017 Numerical Approach: Finite Element Analysis Handbook of Adhesion Technology ed L F M da Silva, A Öchsner and R D Adams (Cham: Springer International Publishing) pp 1–39 [Google Scholar]
  21. Wibawa L A N 2019 Desain dan Analisis Tegangan Crane Hook Model Circular Section Kapasitas 5 Ton Menggunakan Autodesk Inventor 2017 Simetris J Tek Mesin, Elektro dan Ilmu Komput 10 27–32 [Google Scholar]
  22. Wibawa L A N, Diharjo K, Raharjo W and Jihad B H 2020 The Effect of Fillet Radius and Length of The Thick-Walled Cylinder on Von Mises Stress and Safety Factor for Rocket Motor Case AIP Conf Proc 2296 [Google Scholar]
  23. Kishore K, Sanjay Gujre V, Choudhary S, Sanjay Gujre A, Vishwakarma M, Thirumurgan T, Choudhury M, Adhikary M and Kumar A 2020 Failure analysis of a 24 T crane hook using multidisciplinary approach Eng Fail Anal 115 104666 [Google Scholar]
  24. Wibawa L A N 2021 Effect of Fillet Radius of UAV Main Landing Gear on Static Stress and Fatigue Life using Finite Element Method J Phys Conf Ser 1811 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.