EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 402 (2024) MATEC Web Conf., 402 (2024) 01003 References
Open Access
Issue
MATEC Web Conf.
Volume 402, 2024
The 4th International Conference on Engineering, Technology, and Innovative Researches (The 4th ICETIR 2022)
Article Number 01003
Number of page(s) 5
Section Mechanical and Industrial Engineering
DOI https://doi.org/10.1051/matecconf/202440201003
Published online 23 August 2024
  1. Seralathan S, Prasanna H, Arun J, Guhanesh B, Prasanth D, Hariram V and Micha Premkumar T 2020 Finite element analysis of hybrid composite material based leaf spring at various load conditions Mater Today Proc 33 3540–8 [Google Scholar]
  2. Varma N, Ahuja R, Vijayakumar T and Kannan C 2021 Design and analysis of composite mono leaf spring for passenger cars Mater Today Proc 46 7090–8 [Google Scholar]
  3. Noronha B, Yesudasan S and Chacko S 2020 Static and Dynamic Analysis of Automotive Leaf Spring: A Comparative Study of Various Materials Using ANSYS J Fail Anal Prev 20 804–18 [Google Scholar]
  4. Ghosh R, Ghosh S, Ghimire S and Barman R N 2016 Static analysis of multi-leaf spring using ansys workbench 16.0 Int J Mech Eng Technol 7 241–9 [Google Scholar]
  5. Bhatt C D, Nadarajan M, Balaji R, Rohith I and Selokar A 2020 Leaf spring model for heavy load vehicle using solid works and ANSYS analysis Mater Today Proc 33 4764–70 [Google Scholar]
  6. Mallesh B, Gupta B, Kumar S K and Jani S P 2021 Modeling and analysis of leaf spring with different type of materials Mater Today Proc 45 1945–9 [Google Scholar]
  7. Krishnamurthy K, Ravichandran P, Shahid Naufal A, Pradeep R and Sai HarishAdithiya K M 2020 Modeling and structural analysis of leaf spring using composite materials Mater Today Proc 33 4228–32 [Google Scholar]
  8. Alemu Tadesse B and Fatoba O 2022 Design optimization and numerical analyses of composite leaf spring in a heavy-duty truck vehicle Mater Today Proc 62 2814–21 [Google Scholar]
  9. Tadesse B A and Fatoba O 2022 Theoretical and finite element analysis (FEA) of coated composite leaf spring for heavy-duty truck application Mater Today Proc 62 4283–90 [Google Scholar]
  10. Malik S and Afaq K S 2020 Stress Analysis of Composite Leaf Spring-Comparative Approach IOP Conf Ser Mater Sci Eng 899 [Google Scholar]
  11. Khan T I, Omi M I W R, Hossain M J, Haque M M and Rahman F 2018 Stress, Deformation and Failure Analysis of Parabolic Leaf Spring by Finite Element Analysis with Material Optimization IOP Conf Ser Mater Sci Eng 438 [Google Scholar]
  12. Loganathan T G, Vinoth Kumar K and Madhu S 2020 Flexural and fatigue of a composite leaf spring using finite element analysis Mater Today Proc 22 1014–9 [Google Scholar]
  13. Mehta Y, Gehlot S and Sakthivel P 2019 Static and Dynamic Analysis of Parabolic Leaf Spring with Design Optimization for Light Commercial Vehicle 2019 Int Conf Nascent Technol Eng ICNTE 2019 Proc 1–6 [Google Scholar]
  14. Upletawala M A I, Kushwaha A and Bhawde G 2021 Optimization and Weight Reduction of Hybrid Composite Leaf Spring J Phys Conf Ser 2007 [Google Scholar]
  15. Marappan K, Jenarthanan M P and Sree Krishna B 2018 Design of parabolic leaf spring for light duty automobile World J Eng 15 91–8 [Google Scholar]
  16. Ceyhanli U T and Bozca M 2020 Experimental and numerical analysis of the static strength and fatigue life reliability of parabolic leaf springs in heavy commercial trucks Adv Mech Eng 12 1–17 [Google Scholar]
  17. Wibawa L A N, Diharjo K, Raharjo W W and Jihad B H 2020 Stress Analysis of Thick-Walled Cylinder for Rocket Motor Case under Internal Pressure J Adv Res Fluid Mech Therm Sci 70 106–15 [Google Scholar]
  18. Wibawa L A N 2021 Effect of Bolt Hole Size on Static Stress and Fatigue Life of UAV Main Landing Gear Using Numerical Simulation J Phys Conf Ser 1811 [Google Scholar]
  19. Wibawa L A N and Setiadi S 2022 The Effect of Load Variations and Thread Types on the Joint Strength of the Rocket Cap and Tube Using Finite Element Method AIP Conf Proc 2590 [Google Scholar]
  20. Wibawa L A N and Tuswan T 2022 Effect of Cylinder Length on The Ratio of Safety Factor and Weight of Rocket Motor Tube Using Thin-Walled Cylinder AIP Conf Proc 2590 [Google Scholar]
  21. Wibawa L A N and Tuswan 2022 Lightweight Optimization Design of Thin-Walled Cylindrical Rocket Motor Tube Using FEA AIP Conf Proc 2590 [Google Scholar]
  22. Wibawa L A N 2021 Effect of Fillet Radius of UAV Main Landing Gear on Static Stress and Fatigue Life using Finite Element Method J Phys Conf Ser 1811 [Google Scholar]
  23. Busse C, Kach A P and Wagner S M 2016 Boundary Conditions: What They Are, How to Explore Them, Why We Need Them, and When to Consider Them Organ Res Methods 20 574–609 [Google Scholar]
  24. Wibawa L A N, Diharjo K, Raharjo W and Jihad B H 2020 The Effect of Fillet Radius and Length of The Thick-Walled Cylinder on Von Mises Stress and Safety Factor for Rocket Motor Case AIP Conf Proc 2296 [Google Scholar]
  25. Kong Y S, Omar M Z, Chua L B and Abdullah S 2014 Fatigue life prediction of parabolic leaf spring under various road conditions Eng Fail Anal 46 92–103 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.