Open Access
Issue |
MATEC Web Conf.
Volume 400, 2024
5th International Conference on Sustainable Practices and Innovations in Civil Engineering (SPICE 2024)
|
|
---|---|---|
Article Number | 03001 | |
Number of page(s) | 12 | |
Section | Structural and Transportation Engineering | |
DOI | https://doi.org/10.1051/matecconf/202440003001 | |
Published online | 03 July 2024 |
- Hajjar, J. F. “Composite steel and concrete structural systems for seismic engineering” J. Constructional Steel Research, 59 (58), pp. 03–723 (2002) [Google Scholar]
- Mandal S, “Some studies on durability of recycled aggregate concrete” The Indian Concrete Journal, pp 385–388 (2002) [Google Scholar]
- Ramamurthy K and Gumaste K.S. “Properties of recycled aggregate concrete” The Indian concrete Journal, pp 49–53 (1998) [Google Scholar]
- Sahu A.K., Sunil Kumar and Sachan A. K, “Crushed stone waste as fine aggregate for concrete” The Indian Concrete Journal, pp 845–848 (2003) [Google Scholar]
- Nagaraj T.S. and Zahida Banu, “Efficient utilization of rock dust and pebbles as aggregates in Portland cement concrete” The Indian Concrete Journal, Vol 70, No: 1, pp 1–4 (1996) [Google Scholar]
- Shukla M, Sahu A.K. and Sachan A.K., “Performance of stone dust as fine aggregate replacing sand in concrete and mortar” National seminar on Advances in Special Concretes, Indian Concrete Institute, Bangalore, pp 241–248 (1998) [Google Scholar]
- O’Shea, M. and Bridge, R., “Circular thin-walled tubes with high strength concrete infill” Composite construction in steel and concrete II, Germany, ASCE, pp. 780–793 (1996) [Google Scholar]
- O’Shea, M. and Bridge, R, “The design for local buckling of concrete filled steel tubes” Composite Construction-Conventional and Innovate, Austria, pp.319–324 (1997) [Google Scholar]
- Eurocode 4. DD ENV 1994-1-1, Design of Composite Steel and Concrete Structures. Part 1.1, General Rules and Rules for Buildings (with UK National Application Document). London, British Standards Institution (1994) [Google Scholar]
- Kilpatrick, A. and Rangan, B. V., “Behaviour of high-strength composite column” In: Composite Construction – Conventional and Innovate, Innsbruck, Austria, pp. 789–794 (1997) [Google Scholar]
- Kilpatrick, A. and Taylor, T. “Application of Eurocode 4 design provisions to high strength composite columns” In: Composite Construction – Conventional and Innovate, Innsbruck, Austria, pp. 561–566 (1997) [Google Scholar]
- ACI Committee 318. “Building Code requirements for Structural Concrete (ACI 318-95)” Detroit: American Concrete Institute. (1995) [Google Scholar]
- Australian Standards AS3600 & AS4100. “Reinforced Concrete Structures & Steel Structures” Sydney: Standards Australia. (1994) [Google Scholar]
- Georgios Giakoumelis and Dennis Lam, “Axial capacity of circular concrete-filled tube columns” Journal of Constructional Steel Research, Proc. 60, pp.1049–1068. [Google Scholar]
- Brauns, J., “Analysis of stress state in concrete-filled steel column” J. Constructional Steel Research, 49(2), pp. 189–196. (1998) [Google Scholar]
- O’Shea, M. and Bridge, R., “Design of circular thin-walled concrete filled steel tubes” Journal of Structural Engineering, ASCE, Proc. 126, pp. 1295–1303 (2000) [CrossRef] [Google Scholar]
- Shanmugam, N. E. and Lakshmi, B, “State of the art report on steel-concrete composite columns” Journal of Constructional Steel Research, Proc. 57, pp. 1041–1080 (2001) [CrossRef] [Google Scholar]
- Johansson, M. and Gylltoft, K., “Structural behaviour of slender circular steel-concrete composite columns under various means of load application” Journal of Constructional Steel Research, Proc. 01, pp.393–410 (2001) [Google Scholar]
- Gopal, S. R. and Manoharan, P. D, “Experimental behaviour of eccentrically loaded slender circular hollow steel columns in-filled with fibre reinforced concrete” Journal of Constructional Steel Research, pp. 513–520 (2006) [CrossRef] [Google Scholar]
- Johnson, R. P, “Composite Structures of Steel and Concrete. Blackwell Scientific Publications (2nd edition), (2004) [Google Scholar]
- Wang, Y. and Wu, H. C., “Concrete Reinforcement with Recycled Rubbers” Journal of Materials in Civil Engineering, ASCE, 12 (4), pp. 314–319 (2006) [Google Scholar]
- Amjad Masood. “Variation in Strength of Concrete on Addition of Demolished Waste” Indian Concrete Journal, pp. 395–399 (1998) [Google Scholar]
- Mohanraj E. K, Ravisankar K. L, Karthika P, Manikandan P, Enhancement of load carrying capacity of steel tubular columns in-filled with fibre reinforced concrete, International journal of psychosocial rehabilitation, 23(4) 1711 (2019) [CrossRef] [Google Scholar]
- Mohanraj E.K., Kandasamy S., Malathy R., “Behaviour of steel tubular stub and slender columns filled with concrete using recycled aggregates”, Journal of the South African Institution of Civil Engineering, v. 53, n. 2, pp. 31–38 (2011) [Google Scholar]
- N. Chandrasekaran, Dr.E.K. Mohanraj, Experimental Evaluation of New Concrete Encased Concrete Beam to Column Joint by using Composite Material, International Journal of Advanced Engineering Technology, Vol: VII, Issue III, pp.71–75 (2016) [Google Scholar]
- V. Gayathri, N.E. Shanmugam and Y.S. Choo, Concrete-Filled Tubular Columns:Part1-Cross-Section Analysis, International Journal of Structural Stability and Dynamics, 04, 459 (2004) [CrossRef] [Google Scholar]
- Xueping Li and Xilin Lu, Modeling and Seismic Behavior of Concrete-filled Rectangular Steel Tubular Columns in Tall Buildings, Tall Buildings, 187–193 (2005) [Google Scholar]
- Qinghua Tan, Leroy Gardner and Lin Hai Han, Performance of Steel-Reinforced Concrete-Filled Stainless Steel Tubular Columns at Elevated Temperature, International Journal of Structural Stability and Dynamics, 19, 2019. [Google Scholar]
- Fei-Yu Liao; Lin-Hai Han, Zhong Tao and Kim J. R. Rasmussen, Experimental Behavior of Concrete-Filled Stainless Steel Tubular Columns under Cyclic Lateral Loading, Journal of Structural Engineering, 143 (2017) [Google Scholar]
- Lin-Hai Han, Flexural Behaviour of Concrete-Filled Steel Tubes, Journal of Constructional Steel Research, 60 (2), 313–337 (2004) [CrossRef] [Google Scholar]
- Yansheng Du, Zhihua Chen, Changqing Zhang & Xiaochun Cao, Research on Axial Bearing Capacity of Rectangular Concrete-Filled Steel Tubular Columns based on Artificial Neural Networks, Frontiers of Computer Science, 11, 863–873 (2017) [CrossRef] [Google Scholar]
- Vivian W. Y. Tam, Zhi-Bin Wang & Zhong Tao, Behaviour of recycled aggregate concrete filled stainless steel stub columns, Materials and Structures, 47, 293–310 (2014) [CrossRef] [Google Scholar]
- M.H. Lai & J.C.M. Ho, A theoretical axial stress-strain model for circular concrete-filled-steel-tube columns, Engineering Structures, 125, pp 124–143 (2016) [CrossRef] [Google Scholar]
- N. Chandrasekaran and Dr.E.K. Mohanraj, Experimental and Numerical Analysis of Conventional and GFRP Concrete for Frame Members, International Journal of Solid State Technology, 63 (6), 19953–19970 (2020) [Google Scholar]
- E. K. Mohanraj, R. Malathy and K. L. Ravisankar, Utilization of industrial waste materials in concrete-filled steel tubular columns, Revista material, 27(2). https://doi.org/10.1590/S1517-707620220002.1388 (2022) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.