EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 396 (2024) MATEC Web Conf., 396 (2024) 02001 References
Open Access
Issue
MATEC Web Conf.
Volume 396, 2024
8th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium (WMCAUS 2023)
Article Number 02001
Number of page(s) 10
Section Construction Materials
DOI https://doi.org/10.1051/matecconf/202439602001
Published online 24 May 2024
  1. E. Barkanov, E. Eglitis, F. Almeida, M. C. Bowering and G. Watson, “Weight Optimal Design of Lateral Wing Upper Covers Made of Composite Materials”, Eng. Optim. 48 (9), 1618-1637 (2016). DOI: 10.1080/0305215X.2015.1128422 [CrossRef] [Google Scholar]
  2. E. Barkanov, E. Eglitis, F. Almeida, M. C. Bowering and G. Watson, “Optimal Design of Composite Lateral Wing Upper Covers. Part II: Nonlinear Buckling Analysis”, Aerosp. Sci. Technol., 51, 87-95 (2016). DOI: 110.1016/j.ast.2016.01.020 [CrossRef] [Google Scholar]
  3. A. Kovalovs, S. Rucevskis, M. Wesolowski, “Modeling and Design of a Full-Scale Rotor Blade with Embedded Piezocomposite Actuators”, Mech. Compos. Mater. 53 (2), 179-192 (2017). DOI: 10.1007/s11029-017-9652-1 [CrossRef] [Google Scholar]
  4. P. Masarati, M. Morandini, J. Riemenschneider, P. Wierach, S. Gluhih and E. Barkanov “Optimal Design of an Active Twist 1:2.5 Scale Rotor Blade,” in 31st European Rotorcraft Forum 2005, Proceedings of the 31st European Rotorcraft Forum (Curran Associates publishing, Red Hook, NY, 2010), pp. 37.1-37.14. [Google Scholar]
  5. W. Hufenbach, L. Kroll, C. Holste, O. Täger and E. Barkanov, “Design of Dynamically Loaded Fiber-Reinforced Structures with Account of Their Vibro-Acoustic Behavior”, Mech. Compos. Mater. 37 (2), 145-152 (2001). DOI: 10.1023/A:1010673603678 [CrossRef] [Google Scholar]
  6. Y. Koutsawa, W. L. Azoti, S. Belouettar, R. Martin and E. Barkanov, “Loss Behavior of Viscoelastic Sandwich Structures: a Statistical-Continuum Multi-Scale Approach”, Compos. Struct. 94, 1391-1397 (2012). DOI: 10.1016/j.compstruct.2011.11.003 [CrossRef] [Google Scholar]
  7. E. N. Barkanov, “Method of Complex Eigenvalues for Studying the Damping Properties of Sandwich Type Structures”, Mech. Compos. Mater. 29 (1), 90-94 (1993). DOI: 10.1007/BF00656275 [CrossRef] [Google Scholar]
  8. E. Barkanov and J. Gassan, “Frequency Response Analysis of Laminated Composite Beams”, Mech. Compos. Mater. 30 (5), 484-492 (1995). DOI: 10.1007/BF00616777 [CrossRef] [Google Scholar]
  9. E. Barkanov, R. Rikards, C. Holste and O. Täger, “Transient Response of Sandwich Viscoelastic Beams, Plates and Shells under Impulse Loading”, Mech. Compos. Mater. 36 (3), 215-222 (2000). DOI: 10.1007/BF02681873 [CrossRef] [Google Scholar]
  10. R. Rikards, A. Chate, “Identification of elastic properties of composites by method of planning of experiments”, Compos. Struct. 42 (3), 257-263 (1998). DOI: 10.1016/S0263-8223(98)00071-3 [CrossRef] [Google Scholar]
  11. T. Lauwagie, H. Sol, W. Heylen, G. Roebben, “Determination of the In-Plane Elastic Properties of the Different Layers of Laminated Plates by Means of Vibration Testing and Model Updating”, J. Sound Vib. 274 (3-5), 529-546 (2004). DOI: 10.1016/jjsv.2003.05.023 [CrossRef] [Google Scholar]
  12. M. Matter, T. Gmur, J. Cugnoni, A. Schorderet, “Numerical-experimental identification of the elastic and damping properties in composite plates”, Compos. Struct. 90, 180-187 (2009). DOI: 10.1016/j.compstruct.2009.03.001 [CrossRef] [Google Scholar]
  13. M. Wesolowski and E. Barkanov, “Model Errors Influence on Identified Composite Material Properties”, Compos. Struct. 94, 2716-2723 (2012). DOI: 10.1016/j.compstruct.2012.03.030 [CrossRef] [Google Scholar]
  14. E. Barkanov, M. Wesolowski, W. Hufenbach and M. Dannemann, “An Effectiveness Improvement of the Inverse Technique Based on Vibration Tests”, Comput. Struct. 146, 152-162 (2015). DOI: 10.1016/j.compstruc.2014.10.006 [CrossRef] [Google Scholar]
  15. R. Rikards, A. Chate, “Optimal design of sandwich and laminated composite plates based on the planning of experiments”, Struct. Multidiscipl. Optim. 10 (1), 46-53 (1995). DOI: 10.1007/BF01743694 [CrossRef] [Google Scholar]
  16. Y. Shi, H. Sol, H. Huab, “Material parameter identification of sandwich beams by an inverse method”, J. Sound. Vib. 290, 1234-1255 (2006). DOI: 10.1016/jjsv.2005.05.026 [CrossRef] [Google Scholar]
  17. C. R. Lee, T. Y. Kam, S. J. Sun, “Free-Vibration Analysis and Material Constants Identification of Laminated Composite Sandwich Plates”, J. Eng. Mech. 133 (8), 874886 (2007). DOI: 10.1061/(ASCE)0733-9399(2007)133:8(874) [Google Scholar]
  18. N. Li, M. Ben Tahar, Z. Aboura, K. Khellil, “A vibration-based identification of elastic properties of stitched sandwich panels”, J. Compos. Mater. 53(5), 579, (2018). DOI: 10.1177/0021998318788141 [Google Scholar]
  19. A. Kovalovs and S. Rucevskis, “Identification of elastic properties of composite plate,” in Annual Conference on Functional Materials and Nanotechnologies - FM&NT 2011, IOP Conference Series: Materials Science and Engineering 23, edited by A. Sternberg et al. (IOP Publishing Ltd, Bristol, United Kingdom, 2011), pp. 1–7. DOI: 10.1088/1757-899X23/1/012034. DOI: 10.1088/1742-6596/2423/1/012021 [Google Scholar]
  20. A. Kovalovs, S. Rucevskis, “Identification of elastic properties of stiffened composite shell”, Aviation. 13 (4), 101-108 (2009). DOI: 10.3846/1648-7788.2009.13.101-108 [CrossRef] [Google Scholar]
  21. A. Kovalovs, M. Wesolowski, E. Barkanov and S. Gluhihs, “Application of Macro-Fibre Composite (MFC) as Piezoelectric Actuator”, J. Vibroengineering 11 (1), 105-112 (2009). [Google Scholar]
  22. A. Mironov, A. Safonovs, D. Mironovs, P. Doronkin, V. Kuzmickis, “Health Monitoring of Serial Structures Applying Piezoelectric Film Sensors and Modal Passport”, Sensors, 23, 1114 (2023). DOI: 10.3390/s23031114 [CrossRef] [Google Scholar]
  23. R. Rikards, A. K. Bledzkij, V. Eglajs, A. Chate, K. Kurek, “Elaboration of optimal design models for composite materials from data of experiments”, Mech. Compos. Mater. 28 (4), 295-304 (1993). DOI: 10.1007/BF00616154 [CrossRef] [Google Scholar]
  24. S. Rucevskis, A. Kovalovs, A. Chate, “Optimal Sensor Placement in Composite Circular Cylindrical Shells for Structural Health Monitoring,” in 5th International Conference: Innovative Materials, Structures and Technologies (IMST 2022), Journal of Physics: Conference Series 2423, edited by S. Rucevskis (IOP Publishing Ltd, Bristol, United Kingdom, 2022), pp. 1-9. DOI: 10.1088/1742-6596/2423/1/012021 [Google Scholar]
  25. J. Auzins, A. Janushevskis, J. Janushevskis and E. Skukis, “Software EdaOpt for experimental design, analysis and multiobjective robust optimization,” in Proceedings of the International Conference on Engineering and Applied Science Optimization. 4-6 June, 2014, Kos Island, Greece, pp 101-123. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.