Issue |
MATEC Web Conf.
Volume 405, 2024
1st International Conference on Advancements in Sustainable Energy, Materials, and Manufacturing Technology (ICASMMT 2024)
|
|
---|---|---|
Article Number | 02003 | |
Number of page(s) | 10 | |
Section | Materials Science | |
DOI | https://doi.org/10.1051/matecconf/202440502003 | |
Published online | 25 October 2024 |
Effect of Vibration Control Mechanisms on the Vibrational Behavior of Al 6061/SiC Composite Beam
1 Department of Mechanical Engineering, MLR Institute of Technology, Hyderabad 500043, India
2 Department of Mechanical Engineering, RGMCET, Nandyal 515501, India
3 Department of Mechanical Engineering, VNR Vignana Jyothi Institute of Engineering and Technology, Hyderabad 500090, India
4 Department of Mechanical Engineering, Malla Reddy Engineering College (Autonomous), Hyderabad 500100, India
5 Mechanical and Manufacturing Engineering, University of Greenwich, United Kingdom BN24PN
* Corresponding author: ravikiran@mlrinstitutions.ac.in
A machine in action in a plant mine or other mechanical system is a major source of vibrations that spread from foundation and across the surrounding area. There should be the least amount of vibrations possible. The vibrations must be isolated, absorbed, or dampened in order to do this. This study investigates how an oil damper and various types of vibration isolators affect vibration frequency of a stir cast composite beam made up of 90% Al6061 and 10% SiC to examine the influence of an oil damper well, as single and double absorbers on the vibration frequency of a stir cast composite beam. Investigating the frequencies on the Vibration Fundamental Trainer under fixed-hinged, hinged-hinged, and fixed-free boundary conditions. The experiments were carried out on the constructed composite beam. The results indicate that the absorbers vibration amplitudes decrease, along with the damper and isolators effects. Absorber and isolator frequencies observed were lower, than the frequency. Increased beam holes resulted in decreased stiffness and reduced frequencies. Compared to scenarios the frequencies were higher when the beam had fixed end conditions without holes. When compared to absorbers and isolators, oil dampers have more effectively decreased vibrations.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.