Open Access
| Issue |
MATEC Web Conf.
Volume 392, 2024
International Conference on Multidisciplinary Research and Sustainable Development (ICMED 2024)
|
|
|---|---|---|
| Article Number | 01033 | |
| Number of page(s) | 10 | |
| DOI | https://doi.org/10.1051/matecconf/202439201033 | |
| Published online | 18 March 2024 | |
- Jain, V.K. and Adsul, S.G., (2000), Experimental investigations into abrasive flow machining (AFM)‖,International Journal of Machine Tools & Manufacture, Vol. 40, pp. 1003-1021. [CrossRef] [Google Scholar]
- Jain, R.K. and Jain, V.K., (2001), ―Specific energy and temperature determination in abrasive flow machining process‖, International Journal of Machine Tools & Manufacture, Vol. 41, pp. 1689-1704. [CrossRef] [Google Scholar]
- Gorana, V.K., Jain, V.K. and Lal, G.K., (2006), ―Forces prediction during material deformation in abrasive flow machining‖, Wear, Vol. 260, pp. 128-139. [CrossRef] [Google Scholar]
- Gorana, V.K., Jain, V.K. and Lal, G.K., (2004), ―Experimental investigation into cutting forces and active grain density during abrasive flow machining‖, International Journal of Machine Tools & Manufacture, Vol. 44, pp. 201-211. [CrossRef] [Google Scholar]
- Ravishankar, M., Ramkumar, J. and Jain, V.K., (2009), ―Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process‖, Wear, Vol. 266, pp. 688-698. [CrossRef] [Google Scholar]
- Ravishankar, M., Jain, V.K. and Ramkumar, J., (2009), ―Experimental investigations into rotating work-piece abrasive flow finishing‖, Wear, Vol. 267, pp. 43-51. [CrossRef] [Google Scholar]
- Ravishankar, M., Jain,V.K., Ramkumar, J. and Joshi, Y. M., (2011), [Google Scholar]
- ―Rheological characterization of styrene-butadiene based medium and its finishing performance using rotational abrasive flow finishing process‖, International Journal of Machine Tools & Manufacture, Vol. 51, pp. 947-957 [Google Scholar]
- Rao, P. Kondala, and G. Ranga Janardhana. “Experimental investigation on the effet of input paramètres on surface roughness and MRR of abrasive flow machining process.” In E3S Web of Conferences, vol. 391, p. 01024. EDP Sciences, 2023. [CrossRef] [EDP Sciences] [Google Scholar]
- . Kumar, R., Q. Murtaza, and R.S.Walia, Three Start Helical Abrasive Flow Machining For Ductile Materials. Procedia Materials Science, 2018 6: p. 1884-1890. [Google Scholar]
- Wang T, Chen D, Zhang W, An L (2019) Study on key parameters of a new abrasive flow machining (AFM) process for surface finishing. The Int J Adv Manuf Tech 101:39-54 [CrossRef] [Google Scholar]
- D. Sudhakara, S. Suresh, B. Vinod. “Experimental Study on Abrasive Flow Machining (AFM): New Approach for Investigation on Nano-SiC in the Improvement of Material Removal and Surface Finishing”, Journal of Bio– and Tribo– Corrosion, 2020 [Google Scholar]
- Nitin Dixit, Varun Sharma, Pradeep Kumar. “Research trends in abrasive flow machining: A systematic review”, Journal of Manufacturing Processes, 2021 [Google Scholar]
- . Liu, Hua, Jun Wang, R. J. Brown, and Neil Kelson. “Computational fluid dynamic (CFD) simulation of ultrahigh velocity abrasive waterjet.” Key Engineering Materials 233 (2003). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.