EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 392 (2024) MATEC Web Conf., 392 (2024) 01032 References
Open Access
Issue
MATEC Web Conf.
Volume 392, 2024
International Conference on Multidisciplinary Research and Sustainable Development (ICMED 2024)
Article Number 01032
Number of page(s) 10
DOI https://doi.org/10.1051/matecconf/202439201032
Published online 18 March 2024
  1. Li, Junye, Lifeng Yang, Weina Liu, Xuechen Zhang, and Fengyu Sun. “Experimental research into technology of abrasive flow machining nonlinear tube runner.” Advances in Mechanical Engineering 6 (2014): 752353. [CrossRef] [Google Scholar]
  2. Kumar, Satish, V. K. Jain, and Ajay Sidpara. “Nanofinishing of freeform surfaces (knee joint implant) by rotational-magnetorheological abrasive flow finishing (R-MRAFF) process.” Precision engineering 42 (2015): 165-178. [CrossRef] [Google Scholar]
  3. Liu, Chengshang, Wujiao Xu, Tianhao Niu, and Yuting Chen. “Roughness evolution of constrained surface based on crystal plasticity finite element model and coupled Eulerian-Lagrangian method.” Computational Materials Science 201 (2022): 110900. [CrossRef] [Google Scholar]
  4. Radovanovic, Miroslav. “Multi-objective optimization of abrasive water jet cutting using MogA.” Procedia Manufacturing 47 (2020): 781-787. [CrossRef] [Google Scholar]
  5. Yin, Ling, Kuppuswamy Ramesh, Stephen Wan, Xiang Dong Liu, Han Huang, and Yu Chan Liu. “Abrasive flow polishing of micro bores.” Materials and Manufacturing Processes 19, no. 2 (2004): 187-207. [CrossRef] [Google Scholar]
  6. Cheng, Ken-Chuan, A-Cheng Wang, Kuan-Yu Chen, and Chien-Yao Huang. “Study of the Polishing Characteristics by Abrasive Flow Machining with a Rotating Device.” Processes 10, no. 7 (2022): 1362. [CrossRef] [Google Scholar]
  7. Alajmi, Mahdi S. , and Abdullah M. Almeshal. “Prediction and optimization of surface roughness in a turning process using the ANFIS-QPSO method.” Materials 13, no. 13 (2020): 2986. [CrossRef] [Google Scholar]
  8. Spaić, O., Z. Krivokapić, and D. Kramar. “Development of family of artificial neural networks for the prediction of cutting tool condition.” Advances in Production Engineering & Management 15, no. 2 (2020). [Google Scholar]
  9. Boga, Cem, and Tahsin Koroglu. “Proper estimation of surface roughness using hybrid intelligence based on artificial neural network and genetic algorithm.” Journal of Manufacturing Processes 70 (2021): 560-569. [CrossRef] [Google Scholar]
  10. Williams, R. E., K. P. Rajurkar, and L. J. Rhoades. “Performance characteristics of abrasive flow machining.” Non-Traditional Machining (1989): 1989. [Google Scholar]
  11. Rao, P. Kondala, and G. Ranga Janardhana. “Experimental investigation on the effet of input paramètres on surface roughness and MRR of abrasive flow machining process.” In E3S Web of Conferences, vol. 391, p. 01024. EDP Sciences, 2023. [CrossRef] [EDP Sciences] [Google Scholar]
  12. Wang, Wenhua, Wei Yuan, Jie Yu, Qianjian Guo, Shutong Chen, Xianhai Yang, and Jianchen Cong. “Prediction of Surface Roughness in Gas-Solid Two-Phase Abrasive Flow Machining Based on Multivariate Linear Equation.” Micromachines 13, no. 10 (2022): 1649. [CrossRef] [Google Scholar]
  13. Singh, Sehijpal, and H. S. Shan. “Development of magneto abrasive flow machining process.” International Journal of Machine Tools and Manufacture 42, no. 8 (2002): 953-959. [CrossRef] [Google Scholar]
  14. Walia, R. S., H. S. Shan, and Pradeep Kumar. “Abrasive flow machining with additional centrifugal force applied to the media.” Machining science and technology 10, no. 3 (2006): 341-354. [CrossRef] [Google Scholar]
  15. Dabrowski, L., M. Marciniak, and T. Szewczyk. “Analysis of abrasive flow machining with an electrochemical process aid.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220, no. 3 (2006): 397-403. [CrossRef] [Google Scholar]
  16. 17Sankar, Mamilla Ravi, V. K. Jain, and J. Ramkumar. “Experimental investigations into rotating workpiece abrasive flow finishing.” Wear 267, no. 1-4 (2009): 43-51. [CrossRef] [Google Scholar]
  17. Tzeng, Hsinn-Jyh, Biing-Hwa Yan, Rong-Tzong Hsu, and Yan-Cherng Lin. “Selfmodulating abrasive medium and its application to abrasive flow machining for finishing micro channel surfaces.” The International Journal of Advanced Manufacturing Technology 32 (2007): 1163-1169. [CrossRef] [Google Scholar]
  18. Venkatesh, G., Apurbba Kumar Sharma, and Pradeep Kumar. “On ultrasonic assisted abrasive flow finishing of bevel gears.” International Journal of Machine Tools and Manufacture 89 (2015): 29-38. [CrossRef] [Google Scholar]
  19. Sidpara, Ajay M., and V. K. Jain. “Nanofinishing of freeform surfaces of prosthetic knee joint implant.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226, no. 11 (2012): 1833-1846 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.