Open Access
Issue |
MATEC Web Conf.
Volume 392, 2024
International Conference on Multidisciplinary Research and Sustainable Development (ICMED 2024)
|
|
---|---|---|
Article Number | 01016 | |
Number of page(s) | 8 | |
DOI | https://doi.org/10.1051/matecconf/202439201016 | |
Published online | 18 March 2024 |
- Stress and Failure Analysis of Aircraft Wing Using Glare Composite and Aluminum 7075 P Sondankar, RR Arakerimath – ICRRM 2019–System Reliability, Quality …, 2020– Springer Sruthi, Lakshmana Kishore, Komaleswara Rao [2], concluded that the difference between the values of max principal stress, stress intensity, equivalent stress, deformation, and shear [Google Scholar]
- [PDF] Design and Finite Element Analysis of Aircraft Wing M Ragamshetty, TS Deepthi, V Anil, T Akhil … – Journal homepage: www … – ijrpr.com S Bairavi, Mr. Suresh Balaji[4], in their paper [2017] [Google Scholar]
- Chai, Y., Gao, W., Ankay, B., Li, F., & Zhang, C. (2021). Aeroelastic analysis and flutter control of wings and panels: A review. International Journal of Mechanical System Dynamics, 1(1), 5-34. [CrossRef] [Google Scholar]
- Mohamed Amine Bennaceur,Yuan-ming XuandHemza Layachi“Wing Rib Stress analysis and Design Optimization Using Constrained Natural ElementMethod”(ATDMAE 2017) [Google Scholar]
- [PDF] Design and Finite Element Analysis of Aircraft Wing M Ragamshetty, TS Deepthi, V Anil, T Akhil … – Journal homepage: www ijrpr.com When the aircraft travels forwards [5], air flows over the wings which are shaped to create lift … JA Newlin and Geo.W.Trayer[5][2016] [Google Scholar]
- Bindu HC, Muhammad Muhsin Ali H, [3] intheir paper[2018] they ave demonstrated to increase the critical buckling strength and reduced the weight of rib. Buckling analysis [Google Scholar]
- [PDF]Experimental investigation of the aircraft stiffened panel structure under pressure loadsKSV Vashisht – International Journal of Innovations in Engineering …, 2016 –researchgate.net [29] Kakumani Sureka and R Satya Meher,” Modeling And Structural Analysis. [Google Scholar]
- [PDF] Design and Finite Element Analysis of Aircraft Wing M Ragamshetty, T.Deepthi, V Anil, T Akhil … – Journal homepage: www … – ijrpr.com Aswani Kodali and TNCharyulu[9][2014] [Google Scholar]
- [PDF] Design and Finite Element Analysis of Aircraft WingM Ragamshetty, TS Deepthi, V Anil, T Akhil … – Journal homepage: www … – ijrpr.com [Google Scholar]
- [PDF] Design and Finite Element Analysis of Aircraft Wing M Ragamshetty, TS Deepthi, V Anil, T Akhil … – Journal homepage: www … – ijrpr.com Khadse & Prof. SR Zaweri[12][2010] . [Google Scholar]
- [PDF] Familia, escuela y desarrollo humano M Rueda, J Luis, RM Páez Martínez – Rutas de investigación educativa …, 2016 [Google Scholar]
- Bahreini, R., Jimenez, J. L., Wang, J., Flagan, R. C., Seinfeld, J. H., Jayne, J. T., & Worsnop, D. R. (2003). Aircraft‐based aerosol size and composition measurements during ACE‐Asia using an Aerodyne aerosol mass spectrometer. Journal of Geophysical Research: Atmospheres, 108(D23). [CrossRef] [Google Scholar]
- Daniel P Raymer (1938), Aircraft DeConceptual Design, 2nd Edition, Hugh Nelson, Aero Engineering, Vol. II, Part I, George Newnes. [Google Scholar]
- Anjaneyulu N and Lakshmi Lalitha J (2009), Modeling and Structural Analysis on A380 Flight Wing. Bruhn (2005), Analysis and Design of Flight Vehicle Design, 1st Edition. [Google Scholar]
- [pdf] modal analysis of blended wing-body uav n ruseno garuda.kemdikbud.go.id [Google Scholar]
- [pdf] static and dynamic analysis of aircraft wing section using aluminium silicon carbide composite s manikandan – jrmmae.in [Google Scholar]
- [citation] analysis of an naca 4311 airfoil for flying bike as dhakad, p singh, singh –global journals of research in engineering,2014. [Google Scholar]
- Abhijit Hiraman Supekar Design (1988), Analysis and development of a Morph Able Wing Structure. Ajoy Kumar Kundu (2001), Aircraft Design, 1st Edition. [Google Scholar]
- Prashant S N, MadevNagaral and V Auradi, 2012 “Preparation And Evaluation Of Mechanical And Wear Properties Of Al6061 Reinforced With Graphite And Sic Particulate Metal Matrix Composites”IJMERR [Google Scholar]
- Eng.bogdancaloian, Eng.Dorinlozici and ng.Radubisca,2009“Stressand Modal Analysis Report forAvertProgram”, DOI 10.13111/2066-8201. [Google Scholar]
- Mayurkymarkevadiya,2013“CFDAnalysis of Pressure Coefficient for NACA4412”,IJETT Vol. 4 ISSUE 5 Shamim Mahmud D, 2013 [Google Scholar]
- Singh.V& Prasad.R. C, (2004, December). Tensile and fracture behavior of 6061 al-sicp metal matrix composites. In International symposium of research students on materials science and engineering (pp 20–22). [Google Scholar]
- Pinto, G. M., Nayak, J., & Shetty, A. N. (2009). Corrosion behaviour of 6061 Al-15vol. Pct. SiC composite and its base alloy in a mixture of 1: 1 Hydrochloric and sulphuric acid medium. International Journal of Electrochemical Science, 4(10), 1452-1468. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.