Open Access
| Issue |
MATEC Web Conf.
Volume 391, 2024
22nd International Conference Diagnostics of Machines and Vehicles “Hybrid Multimedia Mobile Stage” (ICDMV 2023)
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 9 | |
| Section | Engineering Creativity for Contemporary Europe | |
| DOI | https://doi.org/10.1051/matecconf/202439101001 | |
| Published online | 02 February 2024 | |
- M. Zaverl, O. Valerio, M. Misra, A. Mohanty, Study of the Effect of Processing Conditions on the Co-Injection of PBS/PBAT and PTT/PBT Blends for Parts with Increased Bio-Content, J. Appl. Polym. Sci., 132, 41278–41288 (2015) [CrossRef] [Google Scholar]
- Co-injection 101: “Multi-Layer Molding” basics. Plast News, 08, 2023 https://www.plasticsnews.com/sponsored-content/co-injection-101-multi-layer-molding-basics [Google Scholar]
- D. Kakkar, S. N. Maiti, Effect of flexibility of ethylene vinyl acetate and crystallization of polypropylene on the mechanical properties of i-PP/EVA blends, J. Appl. Polym. Sci., 123, 1905–1912 (2011) [Google Scholar]
- A. Ait-Kadi, M. Bousmina, A. Yousefi, F. Mighri, High performance structured polymer barrier films obtained from compatibilized polypropylene/ethylene vinyl alcohol blends, Polym. Eng. Sci., 47, 1114–1121 (2007) [CrossRef] [Google Scholar]
- A. Ares, J. Silva, J. M. Maia, L. Barral, M. J. Abad, A. Ares-Pernas, Rheomechanical and morphological study of compatibilized PP/EVOH blends, Rheol. Acta, 48, 993–1004 (2009) [CrossRef] [Google Scholar]
- J.F. Castro-Landinez, F. Salcedo-Galan, J.A. Medina-Perilla, Polypropylene/Ethylene—And Polar—Monomer-Based Copolymers/Montmorillonite Nanocomposites: Morphology, Mechanical Properties, and Oxygen Permeability, Polymers, 13, 705–718 (2021) [CrossRef] [Google Scholar]
- K. Kaiser, M. Schmid, M. Schlummer, Recycling of Polymer-Based Multilayer Packaging: A Review, Recycling, 3, 1–24 (2018) [Google Scholar]
- A. Mohammad, H. Ebadi-Dehaghani, Non-isothermal crystallization and oxygen permeability of PP/PLA/EVOH ternary blends. Functions of EVOH, Journal of Thermal Analysis and Calorimetry, 132, 1833–1844 (2018) [CrossRef] [Google Scholar]
- Yi, Z. Feilong, Y. Hua, D. Yajiang, H. Guangxian, L. Qiang, Morphology Evolution of Polymer Blends under Intense Shear During High Speed Thin-Wall Injection Molding, The Journal of Physical Chemistry B., 121 (25), 6257–6270 (2017) [CrossRef] [Google Scholar]
- D. Sykutera, Badania procesów cięcia i podatności na rozdrabnianie poliolefin porowatych w aspekcie ich wtórnego przetwórstwa, Rozprawy 169. Wyd. Uczeln. Uniwersytetu Technologiczno-Przyrodniczego (2013) [Google Scholar]
- R. Konieczka, W. Kałużny, D. Sykutera, Fine rubber grinding by rotational cutting, Kautschuk Gummi Kunststoffe, 50, 9, 641–644 (1997) [Google Scholar]
- D. Sykutera, P. Czyżewski, A. Kościuszko, P. Szewczykowski, Ł. Wajer, M. Bieliński, Monitoring of the injection and holding phases by using a modular injection mold, J. Polym. Eng., 38, 63–71 (2018) [CrossRef] [Google Scholar]
- D. Sykutera, P. Czyżewski, P. Szewczykowski, The Microcellular Structure of Injection Molded Thick-Walled Parts as Observed by In-Line Monitoring. Materials, 13, 5464 (2020) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.