Open Access
| Issue |
MATEC Web Conf.
Volume 388, 2023
2023 RAPDASA-RobMech-PRASA-AMI Conference Advanced Manufacturing Beyond Borders - The 24th Annual International RAPDASA Conference joined by RobMech, PRASA and AMI, hosted by CSIR and CUT
|
|
|---|---|---|
| Article Number | 06002 | |
| Number of page(s) | 11 | |
| Section | Process Development | |
| DOI | https://doi.org/10.1051/matecconf/202338806002 | |
| Published online | 15 December 2023 | |
- F. Oveissi, S. Naficy, A. Lee, D. S. Winlaw, and F. Dehghani, Mater. Today Bio, 5, December 2019, 2020, doi: 10.1016/j.mtbio.2019.100038. [Google Scholar]
- P. Boloori Zadeh, S. C. Corbett, and H. Nayeb-Hashemi, Mater. Sci. Eng. C, 35(1), pp. 335–340, 2014, doi: 10.1016/j.msec.2013.11.015. [CrossRef] [Google Scholar]
- Crago, Matthew Lee, Aeryne Farajikhah, Syamak Oveissi, Farshad Fletcher, David Frederick Dehghani, Fariba Winlaw, David Scott, Naficy, Sina., Mater. Today Commun., 33, October, p. 104916, 2022, doi: 10.1016/j.mtcomm.2022.104916. [CrossRef] [Google Scholar]
- Li, Richard L. Russ, Jonathan Paschalides, Costas Ferrari, Giovanni Waisman, Haim Kysar, Jeffrey W. Kalfa, David., Biomaterials, 225, September, p. 119493, 2019, doi: 10.1016/j.biomaterials.2019.119493. [CrossRef] [Google Scholar]
- B. Rahmani, S. Tzamtzis, H. Ghanbari, G. Burriesci, and A. M. Seifalian, J. Biomech., 45(7), pp. 1205–1211, 2012, doi: 10.1016/j.jbiomech.2012.01.046. [CrossRef] [Google Scholar]
- D. Bezuidenhout, D. F. Williams, and P. Zilla, Biomaterials, 36, pp. 6–25, 2015, doi: 10.1016/j.biomaterials.2014.09.013. [CrossRef] [Google Scholar]
- A. G. Kidane, G. Burriesci, M. Edirisinghe, H. Ghanbari, P. Bonhoeffer, and A. M. Seifalian, Acta Biomater., 5(7), pp. 2409–2417, 2009, doi: 10.1016/j.actbio.2009.02.025. [CrossRef] [Google Scholar]
- H. Ghanbari, H. Viatge, A. G. Kidane, G. Burriesci, M. Tavakoli, and A. M. Seifalian, Trends Biotechnol., 27(6), pp. 359–367, 2009, doi: 10.1016/j.tibtech.2009.03.002. [CrossRef] [Google Scholar]
- T. G. Mackay, D. J. Wheatley, G. M. Bernacca, A. C. Fisher, and C. S. Hindle, Biomaterials, 17(19), pp. 1857–1863, 1996, doi: 10.1016/0142-9612(95)00242-1. [CrossRef] [Google Scholar]
- L Masheane, WB Du Preez, J Combrinck, “Assessment of manufacturability and performance of polyurethane heart valves produced through a locally developed dip moulding process,” in Proceedings of 17th RAPDASA Annual International Conference, 2016, 4(2), pp. 5–37. [Google Scholar]
- H. Jiang, G. Campbell, D. Boughner, W. K. Wan, and M. Quantz, Med. Eng. Phys., 26(4), pp. 269–277, 2004, doi: 10.1016/j.medengphy.2003.10.007. [CrossRef] [Google Scholar]
- F. Oveissi, S. Naficy, A. Lee, D. S. Winlaw, and F. Dehghani, Mater. Today Bio, 5, p. 100038, 2020, doi: 10.1016/j.mtbio.2019.100038. [CrossRef] [Google Scholar]
- A. Karakoç, O. Aksoy, and E. Taciroğlu, J. Biomech., 156, May, p. 111663, 2023, doi: 10.1016/j.jbiomech.2023.111663. [CrossRef] [Google Scholar]
- G. M. Bernacca, B. O’Connor, D. F. Williams, and D. J. Wheatley, Biomaterials, 23(1), pp. 45–50, 2002, doi: 10.1016/S0142-9612(01)00077-1. [CrossRef] [Google Scholar]
- L. Reginald Masheane, Development of a repeatable dip moulding process for manufacturing polymer artificial heart valves master of engineering in mechanical engineering in the, no. October. 2017. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.