EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 388 (2023) MATEC Web Conf., 388 (2023) 05009 References
Open Access
Issue
MATEC Web Conf.
Volume 388, 2023
2023 RAPDASA-RobMech-PRASA-AMI Conference Advanced Manufacturing Beyond Borders - The 24th Annual International RAPDASA Conference joined by RobMech, PRASA and AMI, hosted by CSIR and CUT
Article Number 05009
Number of page(s) 10
Section Product Design and Development
DOI https://doi.org/10.1051/matecconf/202338805009
Published online 15 December 2023
  1. Borgianni, Y., Maccioni, L. Russo Spena, P. and Shunmugavel, M. K. 2019. ‘University education in additive manufacturing and the need to boost design aspects’, in Proceedings of the International Conference on Engineering Design, ICED, vol. 2019-Augus, pp. 629–638, doi: 10.1017/dsi.2019.67. [CrossRef] [Google Scholar]
  2. Borgianni, Y. Pradel, P. Berni, A. Obi, M. and Bibb, R. 2022. ‘An investigation into the current state of education in Design for Additive Manufacturing’, J. Eng. Des., vol. 33, no. 7, pp. 461–490, doi: 10.1080/09544828.2022.2102893. [CrossRef] [Google Scholar]
  3. Novak, E. Brannon, M. Librea-Carden, M.R. and. Haas, A. L. 2021. ‘A systematic review of empirical research on learning with 3D printing technology’, J. Comput. Assist. Learn., doi: 10.1111/jcal.12585. [Google Scholar]
  4. Novak, J. and Loy, J. 2020. ‘Moving 3D Printing beyond the Desktop within Higher Education’, in Integrating 3D Printing into Teaching and Learning, BRILL, pp. 206–227. [Google Scholar]
  5. Alfaify, A. Saleh, M. Abdullah, F. M. and Al-Ahmari, A. M. 2020. ‘Design for additive manufacturing: A systematic review’, Sustainability (Switzerland), vol. 12, no. 19. doi: 10.3390/SU12197936. [Google Scholar]
  6. Alabi, M. O. de Beer, D. J. Wichers, H. and Kloppers, C. P. 2020. ‘Framework for effective additive manufacturing education: a case study of South African universities’, Rapid Prototyp. J., vol. 26, no. 5, pp. 801–826, doi: 10.1108/RPJ-02-2019-0041. [CrossRef] [Google Scholar]
  7. Murray, L. K. Ekong, J. Niknam, S.A. and Rust, M. J. 2022. ‘A Framework for Implementing Design for Additive Manufacturing Methods in First-Year Engineering Curriculum: Investigating the effects of specialized training on engineering design and student self-efficacy’, ASEE Annu. Conf. Expo. Conf. Proc. [Google Scholar]
  8. Blundell, C. 2020. ‘A case study of teachers using design thinking to transform pedagogy with digital’, Queensl. Univ. Technol., doi: https://eprints.qut.edu.au/200525/. [Google Scholar]
  9. Ching G.S. and Roberts, A. 2020. ‘Evaluating the pedagogy of technology integrated teaching and learning: An overview’, Int. J. Res. Stud. Educ., vol. 9, no. 6, pp. 36–50, doi: 10.5861/ijrse.2020.5800. [CrossRef] [Google Scholar]
  10. Valverde-Berrocoso, J. del Carmen Garrido-Arroyo, M. Burgos-Videla, C. and Morales- Cevallos, M. B. 2020. ‘Trends in educational research about e-Learning: A systematic literature review (2009-2018)’, Sustain., vol. 12, no. 12, doi: 10.3390/su12125153. [Google Scholar]
  11. Almasi, M. Zhu, C. and Machumu, H. 2018. ‘Teaching, social, and cognitive presences and their relations to students’ characteristics and academic performance in blended learning courses in a Tanzanian University’, Afrika Focus, vol. 31, no. 1, doi: 10.21825/af.v31i1.9038. [CrossRef] [Google Scholar]
  12. Despeisse, M. and Minshall, T. 2018. ‘Skills and education for additive manufacturing: A review of emerging issues’, in IFIP Advances in Information and Communication Technology, 2017, vol. 513, pp. 289–297, doi: 10.1007/978-3-319-66923-6_34. [CrossRef] [Google Scholar]
  13. Schelly, C. Anzalone, G. Wijnen, B. and Pearce, J. M. 2015. ‘Open-source 3-D printing technologies for education: Bringing additive manufacturing to the classroom’, J. Vis. Lang. Comput., vol. 28, pp. 226–237, Jun., doi: 10.1016/j.jvlc.2015.01.004. [CrossRef] [Google Scholar]
  14. Havenga, S. De Beer, D. Van Tonder, M. Campbell, I. and Van Schalckwyk, F. 2018. ‘Development of an Additive Manufacturing education and training strategy for South Africa, using the I2P Lab concept’, in INTERNATIONAL CONFERENCE ON ADDITIVE TECHNOLOGIES - iCAT 2018, no. October. [Google Scholar]
  15. Havenga, S. De Beer, D. Van Tonder, M. and Campbell, R. I. 2021. ‘Can Digital Fabrication education affect the South African Science, Technology and innovation objectives through curriculum infiltration?’, Ind. 4.0-Shap. Futur. Digit. World, no. September, doi: 10.1201/9780367823085. [Google Scholar]
  16. Diegel, O. Nordin, A. and Motte, D. 2019. ‘DfAM Strategic Design Considerations’, pp. 41–70. [Google Scholar]
  17. Pei, E. Monzón, M. and Bernard, A. 2018. Additive manufacturing - Developments in training and education. [Google Scholar]
  18. Godec, D., Gonzalez-Gutierrez, J., Nordin, A., Pei, E., Ureña Alcázar, J. (eds) 2022. A Guide to Additive Manufacturing. Springer Tracts in Additive Manufacturing. Springer, Cham. https://doi.org/10.1007/978-3-031-05863-9_1. [CrossRef] [Google Scholar]
  19. Mehta P.U. and Berdanier, C.G.P. 2019. ‘A systematic review of additive manufacturing education: Towards engineering education research in AM’, doi: 10.18260/1-2--32006. [Google Scholar]
  20. Hegab, H. Khanna, N. Monib, N. and Salem, A. 2023 ‘Design for sustainable additive manufacturing: A review’, Sustain. Mater. Technol., vol. 35, no. January, p. e00576, doi: 10.1016/j.susmat.2023.e00576. [Google Scholar]
  21. Valjak, F. Kapetanović, A. Taradi, I. and Bojčetić, N. 2023. ‘Work in Progress: Development of Educational Kit for Teaching Additive Manufacturing’, in INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED23, Jul. vol. 3, no. July, pp. 3909–3918, doi: 10.1017/pds.2023.392. [Google Scholar]
  22. Kromer, R. and Gruhier, E. 2023. ‘DESIGN TEACHING INTEGRATING ADDITIVE MANUFACTURING CONSTRAINTS’, Proc. Des. Soc., vol. 3, no. July, pp. 1327–1336, Jul, doi: 10.1017/pds.2023.133. [CrossRef] [Google Scholar]
  23. Thomas-Seale, L. E. J. Kanagalingam, S. Kirkman-Brown, J.C. Attallah, M.M. Espino, D.M. and Shepherd, D.E.T. 2022. Teaching design for additive manufacturing: efficacy of and engagement with lecture and laboratory approaches, no. 0123456789. Springer Netherlands,. [Google Scholar]
  24. Williams C.B. and Seepersad, 2012. ‘Design for additive manufacturing curriculum: A problem- and project-based approach’, 23rd Annu. Int. Solid Free. Fabr. Symp. - An Addit. Manuf. Conf. SFF, pp. 81–92. [Google Scholar]
  25. Watschke, H., Bavendiek, A.K Giannakos, A. and Vietor, T. 2017 ‘A methodical approach to support ideation for additive manufacturing in design education’, 21st Int. Conf. Eng. Des., vol. 5, no. August, pp. 41–50. [Google Scholar]
  26. Hietikko, E. 2014. ‘Design for Additive Manufacturing - DFAM Esa Hietikko’, pp. 14–19,. [Google Scholar]
  27. Kuschmitz, S. Schirp, A. Busse, J. Watschke, H. Schirp, C. and Vietor, T. 2021. ‘Development and processing of continuous flax and carbon fibre-reinforced thermoplastic composites by a modified material extrusion process’, Materials (Basel)., vol. 14, no. 9, doi: 10.3390/ma14092332. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.