Open Access
| Issue |
MATEC Web Conf.
Volume 388, 2023
2023 RAPDASA-RobMech-PRASA-AMI Conference Advanced Manufacturing Beyond Borders - The 24th Annual International RAPDASA Conference joined by RobMech, PRASA and AMI, hosted by CSIR and CUT
|
|
|---|---|---|
| Article Number | 03002 | |
| Number of page(s) | 14 | |
| Section | Material Development | |
| DOI | https://doi.org/10.1051/matecconf/202338803002 | |
| Published online | 15 December 2023 | |
- L.J. Colley, M.A. Wells, and W.J. Poole, Microstructure–strength models for heat treatment of Al–Si–Mg casting alloys I: microstructure evolution and precipitation kinetics. Can. Met. Quart., (2014). 53: p. 125–137. [CrossRef] [Google Scholar]
- J. Hirsch, Recent Development in Aluminum for Automotive Applications, Trans. Nonferrous Met. Soc. China, (2014), 24, p 1995–2002. [CrossRef] [Google Scholar]
- European Aluminum Association, AAM-Applications-Power Train-Heat Exchangers, http://european-aluminium.eu/resource-hub/aluminium-automotive-manual/. Accessed 24 March 2023. [Google Scholar]
- ASTM G85-09, Standard Practice for Modified Salt Spray (fog) Testing, ASTM International, (2009). [Google Scholar]
- T. Buthelezi, Review - Low Mechanical Properties on 9031 Clad Tubestock, Confidential Technical Report, (2015). [Google Scholar]
- J.S. Moema, T. Ramathe, C.W. Siyasiya and T. Buthelezi. Corrosion Properties for Roll- Bonded Two-Layer AA4045/AA3003 for Heat Exchanger Application. 2022 RAPDASA-RobMech-PRASA-CoSAAMI Conference, MATEC Web Conf. Volume 370, (2022), DOI: https://doi.org/10.1051/matecconf/202237010005. [Google Scholar]
- K. Schäuble, Silica passivation layer on aluminium brazing sheets. PhD thesis, Universität zu Köln, (2010). [Google Scholar]
- L.I.U. Wei, Zhenming Yang, Long Li, Dejing ZHOU, An Investigation on Corrosion Behavior of a Multi-layer Modified Aluminum Brazing Sheet, MATEC Web of Conferences 61, 05003 (2016), DOI: 10.1051/matecconf/2016610. [CrossRef] [EDP Sciences] [Google Scholar]
- K. Nagahama, I. Miki, Precipitation during recrystallization in Al-Mn and Al-Cr alloys. Trans. Jpn. Inst. Met., 15, 185–192. (1974). [CrossRef] [Google Scholar]
- ASTM G85 Annex A3: Acidified Synthetic Sea Water (Fog) Testing., ASTM International (2003). [Google Scholar]
- D. Mareci, R. Chelariu, D. Gordin, G. Ungureanu, T. Gloriant, (2009). Comparative corrosion study of Ti–Ta alloys for dental applications. Acta Biomaterialia, 5(9), pp. 3625–3639. [CrossRef] [Google Scholar]
- ASM Handbook on Corrosion of Aluminium and Aluminium Alloys. Edited by J.R. Davis.–ASM International, (1999). [Google Scholar]
- A. Scott, R. Woods, and J. Harris, "Accelerated Corrosion Test Methods for Evaluating External Corrosion Resistance of Vacuum Brazed Aluminum Heat Exchangers," SAE Technical Paper 910590, (1991), https://doi.org/10.4271/910590. [Google Scholar]
- Q. Shi, F. Liang, B Cheadle, Electrochemical behaviors of quad-layer aluminum brazing sheet composite for automotive applications. Corrosion 2004;60:492–500. [CrossRef] [Google Scholar]
- K. Fushimi, S. Yamamoto, R. Ozaki, H. Habazaki, Cross-section corrosionpotential profiles of aluminum alloy brazing sheets observed by the flowing electrolyte scanningdroplet-cell techniques. Electrochim Acta, 2008;53:2529–37. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.