Open Access
MATEC Web Conf.
Volume 382, 2023
6th International Conference on Advances in Materials, Machinery, Electronics (AMME 2023)
Article Number 01014
Number of page(s) 7
Published online 26 June 2023
  1. Chang X, Peng Y, Zhu Z, et al. Tribological properties of winding hoisting rope between two layers with different sliding parameters. Adv Mech Eng 2016; 8: 1687814016679911. [Google Scholar]
  2. Wang J, Pi Y, Hu Y, et al. Modeling and dynamic behavior analysis of a coupled multi-cable double drum winding hoister with flexible guides. Mechanism and Machine Theory 2017; 108: 191–208. [CrossRef] [Google Scholar]
  3. Wu S, Gong X, He P. Dynamic analysis of multi point winding hoisting system under nonsynchronous movements of wire ropes in deep well. J Vibroeng 2021; 23: 512–527. [CrossRef] [Google Scholar]
  4. Antoniak J. Theoretical and run investigation of load distribution onto hoisting ropes in multi rope hoists. Sci.Issues Tech. Univ. Min.33 1968 (in Polish). [Google Scholar]
  5. Li X, Zhu Z, Shen G, et al. Wire Tension Coordination Control of Electro-Hydraulic Servo Driven Double-Rope Winding Hoisting Systems Using a Hybrid Controller Combining the Flatness-Based Control and a Disturbance Observer. Symmetry-Basel 2021; 13: 716. [CrossRef] [Google Scholar]
  6. Kaczmarczyk S, Ostachowicz W. Transient vibration phenomena in deep mine hoisting cables. Part 1: Mathematical model. Journal of Sound and Vibration 2003;262(2): 219–244. [CrossRef] [Google Scholar]
  7. Kaczmarczyk S, Ostachowicz W. Transient vibration phenomena in deep mine hoisting cables. Part 2: Numerical simulation of the dynamic response. Journal of Sound and Vibration 2003;262(2) 245– 289. [CrossRef] [Google Scholar]
  8. Peng Y, Chang X, Sun S, et al. The friction and wear properties of steel wire rope sliding against itself under impact load. Wear 2018; 400: 194–206. [Google Scholar]
  9. Yao J, Deng X, Ma C, et al. Investigation of Dynamic Load in Superdeep Mine Hoisting Systems Induced by Drum Winding. Shock Vib 2021; 2021: 4756813. [Google Scholar]
  10. Singh JM, Chattopadhyay A, Rao C. approach towards analysing stresses in afixed fixed ended long cylindrical winding drum. Mining Technology 1984;64:104-110. [Google Scholar]
  11. Singh JM, Chattopadhyay A, Rao C. Stress analysis in a short cylindrical winding drum. Mining Technology 1984;66:400-403. [Google Scholar]
  12. Otto S, Mupende I, Dietz P. Influence of the hoisting drum winding system on the end plate loads. In: Marjanovic D (ed) DESIGN 2002: Proceedings of the 7th International Design Conference, Vols 1 and 2. Zagreb: Univ Zagreb, Faculty Mechanical Engineering & Naval Architecture, pp. 1091–1096. [Google Scholar]
  13. Dietz P. Design criteria for multilayer wound winch drums following lightweight design principles. In: Marjanovic D (ed) Design 2004: Proceedings of the 8th International Design Conference, Vols 1-3. Zagreb: Univ Zagreb, Faculty Mechanical Engineering & Naval Architecture, pp. 15–20. [Google Scholar]
  14. Dietz P, Lohrengel A, Schwarzer T, et al. Problems related to the design of multi-layer drums for synthetic and hybrid ropes. In: Innovative ropes and rope applications: A celebration of 175 years of wire rope; Proceedings of the OIPEEC conference 2009 / 3rd International Stuttgart Ropedays. [Google Scholar]
  15. Mangalekar S, Bankar V, Chaphale P. Design and Analysis of Central Drum in Mine Hoist.International Research Journal of Engineering and Technology 2016;03(06):1111-1114. [Google Scholar]
  16. Stanisław WOLNY和Sławomir BADURA, 《Stress analysis in structural components of the Koepe pulley in hoisting installations》, Engineering Transactions 2012. [Google Scholar]
  17. Minjie J, Hanbing W, Hongzhang C, et al. The optimum design of main shaft device of double reels for wrapped hoist. International Journal of Information and Systems Sciences 2005;1(3/4):398-405. [Google Scholar]
  18. Torres B, Paya-Zaforteza I, Calderon PA, et al. Analysis of the strain transfer in a new FBG sensor for Structural Health Monitoring. Eng Struct 2011; 33: 539–548. [CrossRef] [Google Scholar]
  19. Chen S. The Optimum Design of A2JK hoist drum based on ANSYS. In: Wang JH, Qi JG (eds) Materials and Manufacturing, Pts 1 and 2. Stafa-Zurich: Trans Tech Publications Ltd, pp. 1028–1031. [Google Scholar]
  20. Hu J, Li J-C, He X, et al. Large Mine Hoist Drum Topology Optimization Design. In: 2016 International Conference on Energy Development and Environmental Protection (edep 2016). Lancaster: Destech Publications, Inc, pp. 520–526. [Google Scholar]
  21. Yu ZL, Li WM. CAE Optimization Design of Mine Hoist Spindle Device. AMR 2011; 299–300: 878– 882. [Google Scholar]
  22. Torrance B M. The design of winding drums. The South African Mechanical Engineer 1965,15:123-141. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.