Open Access
| Issue |
MATEC Web Conf.
Volume 381, 2023
1st International Conference on Modern Technologies in Mechanical & Materials Engineering (MTME-2023)
|
|
|---|---|---|
| Article Number | 02007 | |
| Number of page(s) | 9 | |
| Section | Materials Engineering | |
| DOI | https://doi.org/10.1051/matecconf/202338102007 | |
| Published online | 13 June 2023 | |
- Kah, P., M. Shrestha, and J. Martikainen. Trends in joining dissimilar metals by welding. in Applied Mechanics and Materials. 2014. Trans Tech Publ. [Google Scholar]
- Nguyen, V.N., Q.M. Nguyen, and S.-C.J.M. Huang, Microstructure and mechanical properties of butt joints between stainless steel SUS304L and aluminum alloy A6061-T6 by TIG welding. 2018. 11(7): p. 1136. [Google Scholar]
- Kotari, S. and E. Punna, Mechanical And Metallurgical Investigation Of Tig Welded-Brazed Aluminum And Stainless Steel Disimilar Joint By Using Copper Filler Rod. [Google Scholar]
- Song, J., et al., Analysis of intermetallic layer in dissimilar TIG welding–brazing butt joint of aluminium alloy to stainless steel. 2010. 15(3): p. 213–218. [Google Scholar]
- Shah, L., Z. Akhtar, and M. Ishak, INVESTIGATION OF ALUMINUM-STAINLESS STEEL DISSIMILAR WELD QUALITY USING DIFFERENT FILLER METALS. International Journal of Automotive & Mechanical Engineering, 2013. 8. [Google Scholar]
- Lin, S.-b., et al., Dissimilar metals TIG welding-brazing of aluminum alloy to galvanized steel. Frontiers of Materials Science in China, 2009. 3: p. 78–83. [CrossRef] [Google Scholar]
- Thakur, P. and A. Chapgaon, A review on effects of GTAW process parameters on weld. IJRASET, 2016. 4: p. 136–140. [Google Scholar]
- Jawad, M., M. Jahanzaib, and M.J.M.R.E. Ilyas, Evaluation of welded joints of dissimilar titanium alloy Ti-5Al-2.5 Sn and stainless-steel 304 at different multi-interlayer modes. 2022. 9(10): p. 106501. [Google Scholar]
- Jawad, M., et al., Revealing the microstructure and mechanical attributes of pre-heated conditions for gas tungsten arc welded AISI 1045 steel joints. International Journal of Pressure Vessels and Piping, 2021. 192: p. 104440. [CrossRef] [Google Scholar]
- Hanif, M.W., et al., Evaluation of microstructure and mechanical properties of squeeze overcast Al7075− Cu composite joints. China Foundry, 2023. 20(1): p. 29–39. [CrossRef] [Google Scholar]
- Hanif, M.W., A. Wasim, and M. Sajid, Evaluating the Effect of Process Parameters on the Mechanical Properties of an AA7075-Cu Overcast Joint Using the Taguchi Method. Engineering Proceedings, 2022. 23(1): p. 3. [Google Scholar]
- Aghakhani, M., E. Mehrdad, and E. Hayati, Parametric optimization of gas metal arc welding process by Taguchi method on weld dilution. International journal of modeling and optimization, 2011. 1(3): p. 216. [CrossRef] [Google Scholar]
- Park, S., et al., Optimal dimensioning of redundantly actuated mechanism for maximizing energy efficiency and workspace via Taguchi method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017. 231(2): p. 326–340. [CrossRef] [Google Scholar]
- Panda, S.S., Microstructure and Mechanical Characterization of Stainless Steel and Copper Joint by Metallurgical Modification in GTAW Process. Metallurgical and Materials Transactions A, 2023: p. 1–14. [Google Scholar]
- Cao, X.-l., et al., Effect of process parameters on microstructure and properties of laser welded joints of aluminum/steel with Ni/Cu interlayer. Transactions of Nonferrous Metals Society of China, 2021. 31(8): p. 2277–2286. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.