EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 375 (2023) MATEC Web Conf., 375 (2023) 01003 References
Open Access
Issue
MATEC Web Conf.
Volume 375, 2023
21st International Conference Diagnostics of Machines and Vehicles “Hybrid Multimedia Mobile Stage”
Article Number 01003
Number of page(s) 9
Section Selected Operational Problems of Hybrid Multimedia Mobile Stages
DOI https://doi.org/10.1051/matecconf/202337501003
Published online 08 February 2023
  1. Anarghya A., Harshith DN, Rao N., Nayak NS, Gurumurthy BM, Abhishek VN, S. Patil IG, Thrust and torque force analysis in the drilling of aramid fiber-reinforced composite laminates using RSM and MLPNN-GA, Heliyon 4 (2018) e00703, Open Access Published: July 30, 2018, DOI: https://doi.org/10.1016/j.heliyon.2018.e00703 [Google Scholar]
  2. Bai Y., Jia Zy., Fu R., Hao Jx, Wang Fj., Mechanical model for predicting thrust force with tool wear effects in drilling of unidirectional CFRP, Composite Structures, Volume 262, 2021, 113601, ISSN 0263-8223, https://doi.org/10.1016/j.compstruct.2021.113601 [CrossRef] [Google Scholar]
  3. Ficici F., Investigation of thrust force in drilling polyphthalamide (PPA) composites, Measurement, Volume 182, 2021, 109505, ISSN 0263-2241, https://doi.org/10.1016/j.measurement.2021.109505 [Google Scholar]
  4. Gao H., Xu M. (Intelligent Tool Condition Monitoring System for Turning Operations. In: Wang J., Liao XF., Yi Z. (eds) Advances in Neural Networks ISNN 2005. ISNN 2005. Lecture Notes in Computer Science, vol 3498. Springer, Berlin, Heidelberg (2005) https://doi.org/10.1007/11427469_140 [Google Scholar]
  5. Gao, T. et al., Carbon fiber reinforced polymer in drilling: From damage mechanisms to suppression, Composite Structures, Volume 286, 2022, 115232, ISSN 0263-8223, https://doi.org/10.1016/j.compstruct.2022.115232 [CrossRef] [Google Scholar]
  6. Geier N., Davim JP, Szalay T., Advanced cutting tools and technologies for drilling carbon fiber reinforced polymer (CFRP) composites: A review, Composites Part A: Applied Science and Manufacturing, Volume 125, 2019, 105552, ISSN 1359-835X, https://doi.org/10.1016/j.compositesa.2019.105552 [CrossRef] [Google Scholar]
  7. Kubher S., Gururaja S., Zitoune R., Coupled thermo-mechanical modeling of drilling of multi-directional polymer matrix composite laminates, Composites Part A: Applied Science and Manufacturing, Volume 156, 2022, 106802, ISSN 1359-835X, https://doi.org/10.1016/j.compositesa.2022.106802 [CrossRef] [Google Scholar]
  8. Leppert, T., Paczkowski, T., Polasik, R., Serwacki, D. (2016). composite Material delamination during drilling (Delamination of a fibrous composite material when making holes). Mechanic, 10 (2016), 1422-1423, DOI: 10.17814/mechanic.2016.10.392 [Google Scholar]
  9. Mudhukrishnan M., Hariharan P., Palanikumar K., Measurement and analysis of thrust force and delamination in drilling glass fiber reinforced polypropylene composites using different drills, Measurement, Volume 149, 2020, 106973, ISSN 0263-2241, https://doi.org/10.1016/j.measurement.2019.106973 [Google Scholar]
  10. Musial, J.; Horiashchenko, S.; Polasik, R.; Musial, J.; Kałaczyński, T.; Matuszewski, M.; Śrutek, M. Abrasion Wear Resistance of Polymer Constructional Materials for Rapid Prototyping and Tool-Making Industry. Polymers 2020, 12, 873. https://doi.org/10.3390/polym12040873 [Google Scholar]
  11. Nasir AAA, Azmi AI, Lih TC, Majid MSA, Critical thrust force and critical feed rate in drilling flax fiber composites: A comparative study of various thrust force models, Composites Part B: Engineering, Volume 165, 2019, Pages 222-232, ISSN 1359-8368, https://doi.org/10.1016/j.compositesb.2018.11.134 [CrossRef] [Google Scholar]
  12. Panneerselvam T., Raghuraman S., Kandavel TK, Mahalingam K., Evaluation and analysis of delamination during drilling on Sisal-Glass Fibers Reinforced Polymer, Measurement, Volume 154, 2020, 107462, ISSN 0263-2241, https://doi.org/10.1016/j.measurement.2019.107462 [Google Scholar]
  13. Polasik R., Musiał J., Jasik J., Kovtun I., Povareho A., Selected aspects of diagnosing material removal machining processes state, MATEC Web Conf. 332 01014 (2021), DOI: 10.1051/matecconf/202133201014 [Google Scholar]
  14. Rawal R., Karmakar NC, Sharma SK, Krishnamoorthi S., Application of polymeric drilling fluids for reducing wearing of drill bit, Journal of the Indian Chemical Society, Volume 99, Issue 2, 2022, 100324, ISSN 0019-4522, https://doi.org/10.1016/j.jics.2021.100324 [Google Scholar]
  15. Seeholzer L., Scheuner D., Wegener K., Analytical force model for drilling out unidirectional carbon fiber reinforced polymers (CFRP), Journal of Materials Processing Technology, Volume 278, 2020, 116489, ISSN 0924-0136, https://doi.org/10.1016/j.jmatprotec.2019.116489 [Google Scholar]
  16. Seo J., Banerjee N., Kim Y., Kim DC, Park HW, Experimental and analytical investigation of the drilling forces of the carbon fiber reinforced plastics including thermal effects, Journal of Manufacturing Processes, Volume 58, 2020, Pages 11261137, ISSN 1526-6125, https://doi.org/10.1016/j.jmapro.2020.08.063 [Google Scholar]
  17. Teti, R.; Segreto, T.; Caggiano, A.; Nele, L. Smart Multi-Sensor Monitoring in Drilling of CFRP/CFRP Composite Material Stacks for Aerospace Assembly Applications. Appl. Sci. 2020, 10, 758. (2020). https://doi.org/10.3390/app10030758 [CrossRef] [Google Scholar]
  18. Wan M., Li S.-E., Yuan H., Zhang W.-H., Cutting force modeling in machining of fiber -reinforced polymer matrix composites (PMCs): A review, Composites Part A: Applied Science and Manufacturing, Volume 117, 2019, Pages 34-55, ISSN 1359-835X, https://doi.org/10.1016/j.compositesa.2018.11.003 [CrossRef] [Google Scholar]
  19. Waschkies E., Sklarczyk C., Schneider E. (1994) Tool Wear Monitoring at Turning and Drilling. In: Green RE, Kozaczek KJ, Ruud CO (eds) Nondestructive Characterization of Materials VI. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-2574-5_27 [Google Scholar]
  20. Zadafiya K., Bandhu D., Kumari S., Chatterjee S., Abhishek K., Recent trends in drilling of carbon fiber reinforced polymers (CFRPs): A state-of-the-art review, Journal of Manufacturing Processes, Volume 69, 2021, Pages 47-68, ISSN 1526-6125, https://doi.org/10.1016/j.jmapro.2021.07.029 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.