| Issue |
MATEC Web Conf.
Volume 332, 2021
19th International Conference Diagnostics of Machines and Vehicles “Hybrid Multimedia Mobile Stage”
|
|
|---|---|---|
| Article Number | 01014 | |
| Number of page(s) | 11 | |
| DOI | https://doi.org/10.1051/matecconf/202133201014 | |
| Published online | 06 January 2021 | |
Selected aspects of diagnosing material removal machining processes state
1 Faculty of Mechanical Engineering, University of Science and Technology, Kaliskiego 7 Street, 85-789 Bydgoszcz, Poland
2 Khmelnytsky National University, 29016, 11 Institutska Street, Khmelnytsky, Ukraine
3 Belarusian National Technical University, 220013 Minsk, Nezavisimosti, 65, Belarus
* Corresponding author: robert.polasik@utp.edu.pl
The article presents the results of works on the analysis of the possibility of using force measurements to determine the state of the machining process, both in relation to the phenomena occurring during machining and the workpiece itself compared to acoustic emission signal (AE). The research and analyzes were carried out for the commonly used material removal processes of objects; turning, milling, grinding and drilling. Various materials were processed - metal alloy Hardox 400 as well as fiber composite materials (GFRP - Glass Fiber Reinforced Polymer) and polymer construction material RenShape® BM5035 with various structures. As a result of the conducted analyzes, it was determined that the forces generated in the machine tool-holder-workpiece-tool layout can constitute a good diagnostic signal, on the basis of which it is possible to conclude about the state of the process.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.