Open Access
| Issue |
MATEC Web Conf.
Volume 372, 2022
International Conference on Science and Technology 2022 “Advancing Science and Technology Innovation on Post Pandemic Through Society 5.0” (ICST-2022)
|
|
|---|---|---|
| Article Number | 02005 | |
| Number of page(s) | 4 | |
| Section | Advance Material and Interface | |
| DOI | https://doi.org/10.1051/matecconf/202237202005 | |
| Published online | 08 December 2022 | |
- Barthelot, J.M., (1999). Composite Materials Mechanical Behavior and Structural Analysis. Springer- Verlag. New York [Google Scholar]
- Mohanty, A.K., Misra, M. & Drzal, L.T. (2017), “Sustainable Bio-Composites from renewable resources: Opportunities and challenges in the green materials world”, Journal of Polymers and the Environment, vol. 10, no. 1-2, pp. 19-26. [Google Scholar]
- Gibson, (1994). Principle Of Composite Material Mechanics. New York: Mc Graw Hill,Inc. [Google Scholar]
- Jones, R.M., (1975). Mechanics of Composite Material. Mc Graww Hill Kogakusha. Ltd. [Google Scholar]
- Kaw, Autar K. (2010). Mechanics of Composites Material 3rd edition. New York: Taylor and Francis [Google Scholar]
- Archna, A., Vinutha M., Sagar S., Shivraj V., dan Chetan S. (2015). A Review on Processing of WastePET (Polyethylene Terephthalate) Plastics. International Journal of Polymer Science Engineering, 1(2): 1-13. [Google Scholar]
- Mohanty, A.K., Misra, M. & Drzal, L.T. (2017), “Sustainable Bio-Composites from renewable resources: Opportunities and challenges in the green materials world”, Journal of Polymers and the Environment, vol. 10, no. 1-2, pp. 19-26. [Google Scholar]
- N.H.Sari and S. Teja. (2020). Corn husk Fibers Reinforced Polyester Composites: Tensile Strength Properties, Water Absorption Behavior, and Morphology. IOP Conf. Series: Materials Science and Engineering 722 (2020) 012035. [Google Scholar]
- Gibson, (1994). Principle Of Composite Material Mechanics. New York: McGraw Hill,Inc. [Google Scholar]
- Autar, K. Kaw. 2006. Mechanics of Composite Materials, University of South Florida. [Google Scholar]
- ASTM D 3039-76. (1990) “Standard Test Method for Tensile Properties of Fibre Resin Composite”. ASTM Standard and Literature References for Composites Material, 2ed., American Society for Testing and Materials, Philadelphia, PA. [Google Scholar]
- ASTM D7205/ D7205M-06. (2016). Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars. ASTM International. [Google Scholar]
- Maung, P.P.; Htet, T.L.; Malysheva, G.V. (2020). Simulation and optimization of vacuum assisted resin infusion process for large-sized structures made of carbon fiber-reinforced plastics. In Proceedings of the IOP Conference Series: Materials Science and Engineering; IOP Publishing: Bristol, UK, 2020; Volume 709, p. 22041. [Google Scholar]
- R. Zilong, et al. (2019). Effect of Alkali Treatment on Interfacial and Mechanical Properties of Kenaf Fibre Reinforced Epoxy Unidirectional Composites. Sains Malaysiana 48(1)(2019): 173–181 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.