Open Access
Issue
MATEC Web Conf.
Volume 370, 2022
2022 RAPDASA-RobMech-PRASA-CoSAAMI Conference - Digital Technology in Product Development - The 23rd Annual International RAPDASA Conference joined by RobMech, PRASA and CoSAAMI
Article Number 11003
Number of page(s) 14
Section AM Post Processing & Qualification
DOI https://doi.org/10.1051/matecconf/202237011003
Published online 01 December 2022
  1. N. Jin, Z. Yan, Y. Wang, H. Chen, H. Zhang, Int. J. Mech. Sci. 190, (2021) [Google Scholar]
  2. M. Pham, C. Liu, L. Todd, J. Lertthanasarn, Nature. 565, (2019) [Google Scholar]
  3. A. Barnejee, D. Bernoulli, H. Zhang, M. Yuen, J. Liu, J. Dong, D. Feng, Science 360, (2019) [Google Scholar]
  4. A.A. Zadpoor, R. Hadeyati, Ann. Biomed. Eng. 45, (2017) [Google Scholar]
  5. R. Wauthle, S.M. Ahmadi, S.A. Yavari, Mater. Sci. Eng C. 54, (2015) [Google Scholar]
  6. S. Liu, Y.C. Shin, Mater. Des. 164, (2019) [Google Scholar]
  7. T. Childerhouse, M. Jackson, Metals. 9, (2012) [Google Scholar]
  8. Z. Wang, K. Guan, M. Gao, J. Alloys Compd. 513, (2012) [Google Scholar]
  9. C.Y. Yap, C.K. Chua, Z.L. Dong, Z.H. Liu, D.Q. Zhang, L.E. Loh, S.L. Sing, Appl. Phys. Rev. 2, (2015) [Google Scholar]
  10. P.M. Lekoadi, N. Maledi, M. Tlotleng, B.N. Masina, Investigation of microstructural characteristics of heat treated high speed selective laser melted Ti6Al4V components, in proceeding of the RAPDASA conference, 6-9 November 2018, Johannesburg, South Africa (2018) [Google Scholar]
  11. N. Eshawish, S. Malinov, S. Wei, P. Walls, J. Mater. Eng. Perform. 10, (2021) [Google Scholar]
  12. H. Bai, H. Deng, L. Chen, X. Liu, X. Qin, D. Zhang, T. Liu, X. Cui, Metals. 11, (2021) [Google Scholar]
  13. R.J. Herbert, J. Mater. Sci. 51, (2016) [Google Scholar]
  14. P.M. Lekoadi, N. Maledi, M. Tlotleng, B.N. Masina, Improving the microstructure of high speed selective laser melted Ti6Al4V components by varying residence time during heat treatment, in proceeding of the RAPDASA conference, 6-8 November 2019, Bloemfontein, South Africa (2018) [Google Scholar]
  15. X.P. Tan, Y. Kok, Y.J. Tan, Acta Mater. 97, (2015) [Google Scholar]
  16. W. Xu, M. Brandt, S. Sun, J. Elambasseril, Q. Liu, K. Latham, K, Xia, M. Qian, Acta Mater. 85, (2015) [Google Scholar]
  17. Z.N. Xiao, T.T. Liu, W.H. Liao, Chin. J. Lasers. 44, (2017) [Google Scholar]
  18. P.M. Lekoadi, N. Maledi, M. Tlotleng, B.N. Masina, Investigation of martensite α’ phase transformation during heat treatment of high-speed selective laser melted Ti6Al4V components, in proceeding of The Mineral, Metals & Materials 149th annual conference, TMS, 23-27 February 2020, San Diego, USA (2020) [Google Scholar]
  19. M. Yan, P. Yu, Sinter. Tech. Mater. 23, (2015) [Google Scholar]
  20. G.M. Ter Haar, T.H. Becker, Materials, 11, (2018) [Google Scholar]
  21. R. Sabban, S. Bahl, K. Chatterjee, S. Suwan, Acta Mater. 162, (2019) [Google Scholar]
  22. H. Li, Z. Zhao, Y. Ning, H. Guo, Z. Yao, Metals, 8, (2018) [Google Scholar]
  23. P. Lekoadi, M. Tlotleng, K. Anna, N. Maledi, B. Masina, Metals, 11, (2021) [Google Scholar]
  24. Z. Zou, M. Simonelli, J. Katrib, G. Dimitrakis, R. Hague, Mater. Sci. Eng. A. 814, (2021) [Google Scholar]
  25. H. Li, Z. Zhao, Y. Ning, H. Guo, Z. Yao, Metals, 8, (2018) [Google Scholar]
  26. S.Q. Wu, Y.J. Lu, Y.L. Gan, T.T. Huang, C.Q. Zhao, J.J. Lin, S. Guo, J.X. Lin, J. Alloys Compd. 672, (2016) [Google Scholar]
  27. B. Vracken, L. Thijs, P.J. Kruth, J. Van Humbeeck, J. Alloys Compd. 451, (2012) [Google Scholar]
  28. M. Jia, Y. Alshammari, F. Yang, L. Balzoni, Mater. Sci. Eng. A. 791, (2020) [Google Scholar]
  29. Y.I. Ganor, E. Tiferet, S.C. Vogel, D.W. Brown, M. Chonin, A. Pesach, Materials, 14, (2021) [Google Scholar]
  30. L.A. Chicos, S.M. Zaharia, C. Lancea, M.A. Pop, I. Canadas, J. Rondriguez, J. Galindo, J. Sol. Energy, 173, (2018) [Google Scholar]
  31. J. Sieniawski, W. Ziaja, K. Kubiak, M. Motyka, Titanium alloys (InTech, 2013) [Google Scholar]
  32. A. Gupta, R.K. Khatirkar, A. Kumar, M.S. Parihar, J. Mater. Res. Soc. 54, (2018) [Google Scholar]
  33. J. Yang, H. Yu, J. Yin, M. Gao, Z. Wang, X. Zeng, Mater. Des. 108, (2016) [Google Scholar]
  34. J.S. Zuback, T. Debroy, Materials, 11, (2018) [Google Scholar]
  35. X. Zhang, G. Fang, S. Leeflang, A.J. Bottger, A.A. Zadpoor, J. Zhou, J. Alloys. Compd. 735, (2018) [Google Scholar]
  36. J. Tong, C.R. Bowen, J. Persson, A. Plummer, Mater. Sci. Tech. 33, (2017) [Google Scholar]
  37. ASTM F2924-14, (2012), Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion, ASTM International, West Conshohocken, PA. [Google Scholar]
  38. K.S. Munir, Y. Zheng, D. Zhang, J. Lin, Y. Li, C, Wen, Mater. Sci. Eng. A. 688, (2017) [Google Scholar]
  39. E. Tiferet, M. Ganor, D. Zolotaryov, A, Garkun, A. Hadjadj, M. Chonin, O. Yeheskel, Materials, 12, (2019) [Google Scholar]
  40. X. Gong, K. Anderson, K. Chou, Manuf. Rev. 1, (2012) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.