EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 370 (2022) MATEC Web Conf., 370 (2022) 11004 References
Open Access
Issue
MATEC Web Conf.
Volume 370, 2022
2022 RAPDASA-RobMech-PRASA-CoSAAMI Conference - Digital Technology in Product Development - The 23rd Annual International RAPDASA Conference joined by RobMech, PRASA and CoSAAMI
Article Number 11004
Number of page(s) 12
Section AM Post Processing & Qualification
DOI https://doi.org/10.1051/matecconf/202237011004
Published online 01 December 2022
  1. L. Hitzler et al., Adv. Mater. Sci., 2018 (2018) doi: 10.1155/2018/8213023. [Google Scholar]
  2. B. Konieczny, A. Szczesio-Wlodarczyk, J. Sokolowski, K. Bociong, Materials, 13, 16 (2020) doi: 10.3390/ma13163524. [Google Scholar]
  3. S. Bhatia, K. Ramadurai, 3D printing and bio-based materials in global health (2017) [Google Scholar]
  4. T. Narushima, K. Ueda, A. Alfirano, Co-Cr Alloys as Effective Metallic Biomaterials, in Biomaterials Science and Engineering (2015). doi: 10.1007/978-3-662-46836-4_7. [Google Scholar]
  5. M. Canciglieri, A. Leite, A. Szejka, O. Canciglieri Júnior, Int. J. Comput. Integr. Manuf. 32, 9 (2019). doi: 10.1080/0951192x.2019.1636410. [Google Scholar]
  6. A. Wijk, I. Wijk, 3D printing with biomaterials (2015) [Google Scholar]
  7. A. Ovsianikov, J. Yoo, V. Mironov, 3D Printing and Biofabrication, (2020) [Google Scholar]
  8. X. Wang, K. Chou, J. Manuf. Process. 48 (2019). doi: 10.1016/j.jmapro.2019.10.027. [Google Scholar]
  9. W. Lee, J. Wang, C. Hsu, P. Peng, J. Prosthet. Dent. (2020). doi: 10.1016/j.prosdent.2020.06.038. [Google Scholar]
  10. S. L. Sing, W. Y. Yeong, Effect of heat treatment on cobalt-chromium-molybdenum alloy fabricated by selective laser melting, in Proc. of the 3rd Int. Conf. on Progress in Additive Manufacturing, Nanyang Technological University (2018). doi: 10.25341/D4NP43 [Google Scholar]
  11. K. Mantrala, M. Das, V. Balla, C. Rao, V. Kesava Rao, Front. Mech. Eng. 1 (2015). doi: 10.3389/fmech.2015.00002. [Google Scholar]
  12. W. Wei et al., Metall Mater Trans A 51 6 (2020). doi: 10.1007/s11661-020-05719-y. [Google Scholar]
  13. X. Yan, H. Lin, Y. Wu, W. Bai, J. Prosthet. Dent. 119, 6 (2018). doi: 10.1016/j.prosdent.2018.04.002. [Google Scholar]
  14. Y. Kajima et al., Mater. Sci. Eng. A 726 (2018). doi: 10.1016/j.msea.2018.04.048. [Google Scholar]
  15. M. Szala, G. Winiarski, Ł. Wójcik, T. Bulzak, Materials 13, 9 (2020). doi: 10.3390/ma13092022. [Google Scholar]
  16. Simufact Engineering, Simufact Additive: Technology. [Online]. Available: https://www.simufact.com/technology.html [Google Scholar]
  17. Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075), F04 Committee, West Conshohocken, PA. [Google Scholar]
  18. Electro Optical Systems, EOS CobaltChrome SP2 for EOSINT M 270. [Online]. Available: https://www.stratasysdirect.com/-/media/files/direct/material-datasheets/direct-metal-laser-sintering/dmls_cobalt_chrome_sp2_material_specifications.pdf [Google Scholar]
  19. OR Laser ORLAS CREATOR review - hybrid metal 3D printer, Aniwaa. Available: https://www.aniwaa.com/product/3d-printers/or-laser-orlas-creator/#:~:text=The%20OR%20Laser%20ORLAS%20CREATOR. [Google Scholar]
  20. A. Venter, Activities at Safari-1 research reactor on residual stress measurements International Atomic Energy Agency (IAEA) (2005). [Google Scholar]
  21. A. Venter, P. van Heerden, D. Marais, J. Raaths, Physica B Condens. Matter 551 (2018). doi: 10.1016/j.physb.2017.12.011. [Google Scholar]
  22. M. Ripley, Mater. Forum 30 (2006) [Google Scholar]
  23. S. Goel et al., Mater. Des 195 (2020). doi: 10.1016/j.matdes.2020.109045. [Google Scholar]
  24. M. Sedighi, R. Nazemnezhad, Exp. Tech. 40, 1(2016). doi: 10.1007/s40799-016-0033-9. [Google Scholar]
  25. I. C. Noyan, J. B. Cohen, Residual stress: measurement by diffraction and interpretation (1987). [Google Scholar]
  26. Simufact - Manufacturing Process Simulation for Metalworking Industry, MSC Software, (2021). [Online]. Available: https://www.mscsoftware.com/product/simufact. [Google Scholar]
  27. Simufact Engineering, Introducing the inherent strain method: Tutorial. Accessed: (2021). [Google Scholar]
  28. T. Taufek, Y. Manurung, S. Lüder, M. Graf, F. Salleh, Distortion Analysis of SLM Product of SS316L using Inherent Strain Method, in Proceedings of the IOP Conference Series: Materials Science and Engineering, 834, 1 (2020). doi: 10.1088/1757-899x/834/1/012011. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.