Open Access
| Issue |
MATEC Web Conf.
Volume 370, 2022
2022 RAPDASA-RobMech-PRASA-CoSAAMI Conference - Digital Technology in Product Development - The 23rd Annual International RAPDASA Conference joined by RobMech, PRASA and CoSAAMI
|
|
|---|---|---|
| Article Number | 08002 | |
| Number of page(s) | 13 | |
| Section | AM Part Characterisation | |
| DOI | https://doi.org/10.1051/matecconf/202237008002 | |
| Published online | 01 December 2022 | |
- B. Zhang et al. The biomimetic design and 3D printing of customised mechanical properties porous Ti6Al4 V scaffold for load-bearing bone reconstruction, Materials and Design,152(1), pp.30–39 (2018) [CrossRef] [Google Scholar]
- Metal AM. Fraunhofer Institute for Laser Technology showcases reduced cost Additive manufacturing at laser show, Metal AM (2017) [Google Scholar]
- U.S. Titanium Industry Inc. Titanium Alloys – Ti6Al4 V Grade 5, [Online]. Available: https://www.azom.com/article.aspx?ArticleID=1547 . [Accessed 04/03/2022] (2002) [Google Scholar]
- ASM Committee. Titanium: A Technical Guide, in The Metallurgy of Titanium, ASM international, pp. 22–23 (2000) [Google Scholar]
- R. Pederson. Microstructure and Phase Transformation of Ti-6Al-4 V, Lulea University of Technology (2002) [Google Scholar]
- M. Elsayed et al. Optimisation of SLM process parameters for Ti6Al4 V medical implants, Rapid Prototyping Journal, pp.433–447 (2019) [Google Scholar]
- T. Riipine. Heat treatment of AM alloys, VTT Technical Research Centre of Finland (2020) [Google Scholar]
- Renishaw. Ti6Al4 V ELI-0406 powder for additive manufacturing, Renishaw (2022) [Google Scholar]
- F.N. Depboylu et al. titanium based bone implants production using laser powder bed fusion technology, Journal of Materials Research and Technology, 17(1), pp.1408–1426 (2022) [CrossRef] [Google Scholar]
- L. Bai et al. Improved mechanical properties and energy absorption of Ti6Al4 V laser powder bed fusion lattice structures using curving lattice struts, Materials & Design (2021) [Google Scholar]
- K.P. Kutzner et al. Outcome of extensive varus and valgus stem alignment in short-stem THA: clinical and radiological analysis using EBRA-FCA, Archives of Orthopaedic and Trauma Surgery, 137(3), pp.1–9 (2017) [Google Scholar]
- V. Radek, K. Tomas, C. Ondrej, Z. Tomas and P. Libor, Deviations of the SLM Produced Lattice Structures and Their Influence on Mechanical Properties, Materials, 3144(15), (2022) [Google Scholar]
- SAE. Heat Treatment of Titanium and Titanium Alloys (AMS-H81200), SAE International (2014) [Google Scholar]
- ASTM. Standard Practice for Micro etching Metals and Alloys E407-07, ASTM International, West Conshohocken (2015) [Google Scholar]
- Waygate Technologies, Phoenix Nanotom M, Wunstorf (2021) [Google Scholar]
- Plastometrex. Introduction to Indentation Plastometry Online]. Available: https://plastometrex.com/blogs/introduction-to-indentation-plastometry (2021) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.