Open Access
| Issue |
MATEC Web Conf.
Volume 370, 2022
2022 RAPDASA-RobMech-PRASA-CoSAAMI Conference - Digital Technology in Product Development - The 23rd Annual International RAPDASA Conference joined by RobMech, PRASA and CoSAAMI
|
|
|---|---|---|
| Article Number | 04001 | |
| Number of page(s) | 11 | |
| Section | Rapid Casting | |
| DOI | https://doi.org/10.1051/matecconf/202237004001 | |
| Published online | 01 December 2022 | |
- S. Mitra, A. Rodríguez de Castro, and M. El Mansori, “On the rapid manufacturing process of functional 3D printed sand molds,” Journal of Manufacturing Processes vol. 42, pp.202–212, June 2019 [CrossRef] [Google Scholar]
- J. Kang, Q. Ma, “The role and impact of 3D printing technologies on casting” China Foundry, vol 14(3), pp 157–168, May 2017. [CrossRef] [Google Scholar]
- J. Walker, E. Harris, C. Lynagh, A. Beck, R. Lonardo, B. Vuksanovich, J. Thiel, K. Rogers, B. Conner, and E. MacDonald, “3D printed smart molds for sand casting,” International Journal of Metal Casting, vol. 12, pp.785–796, October 2018. [CrossRef] [Google Scholar]
- K. D. Nyembwe, (2007). “Technologies for the base metal casting industry in Southern Africa: The impact of rapid prototyping,” Fourth Southern African Base Metals Conference, Swakopmund, Namibia, 23–25 July 2007: Africa’s Base Metals Resurgence, pp.305–311. [Google Scholar]
- N. Koleli, and A. Demir, “Chromite,” in Enviromental materials and waste: Resource recovery and pollution prevention, M. N. V. Prasad and K. Shih, Eds. Amsterdam: Elsiever, 2016, pp.245–263. [Google Scholar]
- K. Hodder, and R. J. Chalaturnyk, “Bridging additive manufacturing and sand casting: utilizing foundry sand,” Additive Manufacturing, vol. 28, pp.649–660, August 2019. [CrossRef] [Google Scholar]
- K. D. Nyembwe, D. Oyombo, and P.J. M. van Tonder, “Suitability of a South African silica sand for three-dimensional printing of foundry mould and cores,” South African Journal of Industrial Engineering, vol. 27, pp.230–237, November 2016. [Google Scholar]
- K. Nyembwe, M. Mashila, P. J. M. van Tonder, D. J. de Beer, and E. Gonya “Physical properties of sand parts produced using a Voxeljet VX1000 three-dimensional printer,” South African Journal of Industrial Engineering, vol. 27, pp.136–142, November 2016 [Google Scholar]
- J.L. Chauke, K.D. Nyembwe, & PJM van Tonder (2021). “Assessment of mould properties of local chromite sand rapid sand casting applications”. RAPDASA 22nd Annual conference. (pp 158–162), November 2021. [Google Scholar]
- J. L. Chauke, N. V. Tshabalala, and K. D. Nyembwe, (2021). “Evaluation of local chromite sands for rapid sand casting applications,” Southern African Institute for Industrial Engineering (pp.434–445). Johannesburg: South African Institite for Industrial Engineering. [Google Scholar]
- N. V. Tshabalala, K. D. Nyembwe, and P. J. M. van Tonder, “Optimisation of a resin- coated sand for rapid sand casting applications,” South African Journal of Industrial Engineering, vol. 32, pp.290–298, November 2021. [CrossRef] [Google Scholar]
- M. Upadhyay, T. Sivarupan, and M. El Mansori, “3D printing for rapid sand casting: A review,” Journal of Manufacturing Processes, vol. 29, pp.211–220, October 2017. [CrossRef] [Google Scholar]
- P. J. M van Tonder, “Development of a quality assurance framework for chemical coated sand used in additive manufacturing technologies,” Unpublished master’s dissertation, North-West University, 2019. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.