EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 370 (2022) MATEC Web Conf., 370 (2022) 03013 References
Open Access
Issue
MATEC Web Conf.
Volume 370, 2022
2022 RAPDASA-RobMech-PRASA-CoSAAMI Conference - Digital Technology in Product Development - The 23rd Annual International RAPDASA Conference joined by RobMech, PRASA and CoSAAMI
Article Number 03013
Number of page(s) 12
Section Material Development
DOI https://doi.org/10.1051/matecconf/202237003013
Published online 01 December 2022
  1. F. Schleg, Technology of metal casting, Illinois: American Foundry Society, 2003. [Google Scholar]
  2. A. Pilato, Phenolic Resins: Chemistry, Applications, Standardization, Safety and Ecology. 2nd ed, Berlin: Springer Verlag, 2000. [Google Scholar]
  3. R. Brown, Foseco ferrous foundrymen’s handbook, Johannesburg: Butterworth Heinemann, 2000. [Google Scholar]
  4. S. Acharya, “A Furan No-Bake Binder System Analysis for Improved Casting Quality,” International Journal of Metalcasting, vol. 10, no. 4, 2016. [Google Scholar]
  5. P. Shakor, S. Nejadi, G. Paul and J. Sanjayan, “Dimensional accuracy, flowability, wettability, and porosity in inkjet 3DP for gypsum and cement mortar materials,” Elsevier B.V. – Automation in Construction, p. 110, 2019. [Google Scholar]
  6. N. Tshabalala, K. Nyembwe and M. Van Tonder, “OPTIMISATION OF A RESIN- COATED OPTIMISATION OF A RESIN-COATED CASTING APPLICATIONS,” South African Journal of Industrial Engineering, vol. 32, no. 3, pp. 290 – 298, 2021. [CrossRef] [Google Scholar]
  7. J. Chauke, K. D. Nyembwe and M. Van Tonder, “Evaluation of resin coated chromite sand for rapid sand casting applications,” in 32nd Annual Conference for the Southern African Institute for Industrial Engineering, Muldersdrift, 2021. [Google Scholar]
  8. M. Upadhyay, T. Sivarupan and M. El Mansori, “3D printing for rapid sand casting: A review,” Journal of Manufacturing Processes, vol. 29, pp. 211 – 220, 2017. [CrossRef] [Google Scholar]
  9. M. van Tonder and D. J. de Beer, “Establishment of a quality assurance framework for Additive Manufacturing chemical coated sand.,” in Rapdasa 21st Annual International Conference, Bloemfontein, 2019. [Google Scholar]
  10. O. Dady, D. Nyembwe and P. van Tonder, “Sulfonic Acid coating of refractory sand for three dimentional printing applications,” in RAPDASA 19th Annual Conference and Exhibition, Braamfontein, 2018. [Google Scholar]
  11. American Foundry Society, Mold and core test handbook, Illinois: American Foundry Society, 2006. [Google Scholar]
  12. D. Hui, G. Imbalzano, A. Kashani, T. D. Ngo and K. T. Nguyen, “Additive manufacturing (3D priniting): A review of materials, methods,application and challenges,” Compsites Part B, pp.172–196, 2018. [Google Scholar]
  13. FOSECO South Africa, “Material Safety DatA Sheet,” Vesuvius South Africa (Pty), Alrode, South Africa, 2013. [Google Scholar]
  14. VoxelJet Ltd., “The 3D printing process-Binder Jetting,” 2020. [Online]. Available: https://www.voxeljet.com/binder-jetting-technology/. [Accessed 14 5 2021]. [Google Scholar]
  15. Voxeljet AG, “Material data sheet,” Voxeljet AG: 3D Printers, Friedberg, Germany, 2021. [Google Scholar]
  16. N. Tshabalala, K. Nyembwe and M. Van Tonder, “Optimisation of a resin coated chromite sand for rapid sand casting applications,” South African Journal of Industrial Engineering: Special Edition, vol. 32, no. 3, pp.290–298, 2021. [CrossRef] [Google Scholar]
  17. O. Dady, “Sulfonic Acid coating of refractory sand for three dimentional printing applications,” Johannesburg, 2018. [Google Scholar]
  18. G. Lumay, “Measuring the flowing properties of powders and grains,” Powder Technology, vol. 224, pp.19–27, 2012. [CrossRef] [Google Scholar]
  19. F. Dini, R. H. Rezaie and S. A. Ghaffari, “A review of binder jet process parameters; powder, binder, printing and sintering condition,” Metal Powder Report, vol. 75, no. 2, 2019. [Google Scholar]
  20. A. Turkeli, “SAND, SAND ADDITIVES, SAND PROPERTIES, and SAND RECLAMATION,” 2017. [Online]. Available: https://mimoza.marmara.edu.tr/~altan.turkeli/files/cpt-2-sand_sand.pdf. [Accessed 04 02 2019]. [Google Scholar]
  21. J. Thiel, “Advancements in Materials for Three-Dimensional Printing of Moulds and Cores.,” International Journal of Casting, vol. 5, no. 24, p. 105, 2017. [Google Scholar]
  22. P. Shakor, S. Nejadi, G. Paul, J. Sanjayan and A. Nazari, “Mechanical properties of cement-based materials and effect of elevated temperature on three-dimensional (3D) printed mortar specimens in inkjet 3-D printing,” Materials Journal, vol. 116, no. 2, pp. 55 – 67, 2019. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.