EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 370 (2022) MATEC Web Conf., 370 (2022) 03001 References
Open Access
Issue
MATEC Web Conf.
Volume 370, 2022
2022 RAPDASA-RobMech-PRASA-CoSAAMI Conference - Digital Technology in Product Development - The 23rd Annual International RAPDASA Conference joined by RobMech, PRASA and CoSAAMI
Article Number 03001
Number of page(s) 10
Section Material Development
DOI https://doi.org/10.1051/matecconf/202237003001
Published online 01 December 2022
  1. Raji, S.A., A.P.I. Popoola, S.L. Pityana, and O.M. Popoola, Characteristic effects of alloying elements on ß solidifying titanium aluminides: A review. Heliyon, 2020. 6(7), e04463. [CrossRef] [Google Scholar]
  2. Weisheit, A., S.-K. Rittinghaus, A. Dutta, and J.D. Majumdar, Studies on the effect of composition and pre-heating on microstructure and mechanical properties of direct laser clad titanium aluminide. Optics and Lasers in Engineering, 2020. 131, 106041. [CrossRef] [Google Scholar]
  3. Kumar, V.A., R. Gupta, M. Prasad, and S.N. Murty, Recent advances in processing of titanium alloys and titanium aluminides for space applications: A review . Journal of Materials Research, 2021, 1-28. [Google Scholar]
  4. Neumeier, S., J. Bresler, C. Zenk, L. Haußmann, A. Stark, F. Pyczak, and M. Göken, Partitioning Behavior of Nb, Ta, and Zr in Fully Lamellar ?/a2 Titanium Aluminides and Its Effect on the Lattice Misfit and Creep Behavior. Advanced Engineering Materials, 2021, 2100156. [Google Scholar]
  5. Kanyane, L.R., A.P. Popoola, S. Pityana, and M. Tlotleng, Heat-treatment effect on anti-corrosion behaviour and tribological properties of LENS in-situ synthesized titanium aluminide. International Journal of Lightweight Materials and Manufacture, 2022. 5(2), 153-161. [CrossRef] [Google Scholar]
  6. Tlotleng, M., B. Masina, and S. Pityana, Characteristics of laser In-situ alloyed titanium aluminides coatings. Procedia Manufacturing, 2017. 7, 39-45. [CrossRef] [Google Scholar]
  7. Seidel, A., S. Saha, T. Maiwald, J. Moritz, S. Polenz, A. Marquardt, J. Kaspar, T. Finaske, E. Lopez, and F. Brueckner, Intrinsic Heat Treatment Within Additive Manufacturing of Gamma Titanium Aluminide Space Hardware. JOM, 2019. 71(4), 1513-1519. [CrossRef] [Google Scholar]
  8. Tlotleng, M., Microstructural properties of heat-treated LENS in situ additively manufactured titanium aluminide. Journal of Materials Engineering and Performance, 2019. 28(2), 701-708. [CrossRef] [Google Scholar]
  9. Liu, Y., Local Structure of Al-based Amorphous Alloys after Microalloying by Element Substitution and after Ball Milling. 2012. [Google Scholar]
  10. Panin, P., A. Kochetkov, A. Zavodov, and E. Lukina, Effect of Gd addition on phase composition, structure, and properties of beta-solidifying TiAl-based alloy with Zr and Cr content variability. Intermetallics, 2020. 121, 106781. [CrossRef] [Google Scholar]
  11. Ye, L.-H., H. Wang, G. Zhou, Q.-M. Hu, and R. Yang, Phase stability of TiAl-X (X= V, Nb, Ta, Cr, Mo, W, and Mn) alloys. Journal of Alloys and Compounds, 2020. 819, 153291. [CrossRef] [Google Scholar]
  12. Kanyane, L.R., A.P.I. Popoola, S. Pityana, and M. Tlotleng, Synthesis of Ti-Al-xNb Ternary Alloys via Laser-Engineered Net Shaping for Biomedical Application: Densification, Electrochemical and Mechanical Properties Studies. Materials, 2022. 15(2), 544. [CrossRef] [Google Scholar]
  13. Reith, M., M. Franke, M. Schloffer, and C. Körner, Processing 4th generation titanium aluminides via electron beam based additive manufacturing–characterization of microstructure and mechanical properties. Materialia, 2020. 14, 100902. [CrossRef] [Google Scholar]
  14. Wang, J., Q. Luo, H. Wang, Y. Wu, X. Cheng, and H. Tang, Microstructure characteristics and failure mechanisms of Ti-48Al-2Nb-2Cr titanium aluminide intermetallic alloy fabricated by directed energy deposition technique. Additive Manufacturing, 2020. 32, 101007. [CrossRef] [Google Scholar]
  15. Lei, X., X. Wang, F. Kong, H. Zhou, and Y. Chen, A moving-boundary dynamic model for in-situ alloyed and additive manufacturing TiAl-Nb alloys. Journal of Manufacturing Processes, 2022. 73, 563-571. [CrossRef] [Google Scholar]
  16. Zhang, C., Y. Liu, J. Lu, L. Xu, Y. Lin, P. Chen, Q. Sheng, and F. Chen, Additive Manufacturing and Mechanical Properties of Martensite/Austenite Functionally Graded Materials by Laser Engineered Net Shaping. Journal of Materials Research and Technology, 2022. [Google Scholar]
  17. Tlotleng, M., T. Lengopeng, M.N. Seerane, and S.L. Pityana, Effects of heat-treatment on the microstructure of TiAl-Nb produced with laser metal deposition technique. 2017. [Google Scholar]
  18. Agapovichev, A., A. Sotov, V. Kokareva, and V. Smelov. Possibilities and limitations of titanium alloy additive manufacturing. in MATEC Web of Conferences. 2018. EDP Sciences [Google Scholar]
  19. Tlotleng, M. and S. Pityana, Effects of Al and heat treatment on the microstructure and hardness of Ti–Al synthesized via in situ melting using LENS. Metals, 2019. 9(6), 623. [CrossRef] [Google Scholar]
  20. Kim, Y.-K., J.K. Hong, and K.-A. Lee, Enhancing the creep resistance of electron beam melted gamma Ti–48Al–2Cr–2Nb alloy by using two-step heat treatment. Intermetallics, 2020. 121, 106771. [CrossRef] [Google Scholar]
  21. Dilip, J., S. Zhang, C. Teng, K. Zeng, C. Robinson, D. Pal, and B. Stucker, Influence of processing parameters on the evolution of melt pool, porosity, and microstructures in Ti-6Al-4V alloy parts fabricated by selective laser melting. Progress in Additive Manufacturing, 2017. 2(3), 157-167. [CrossRef] [Google Scholar]
  22. Sibisi, P., N. Arthur, and S. Pityana, Review on direct metal laser deposition manufacturing technology for the Ti-6Al-4V alloy. The International Journal of Advanced Manufacturing Technology, 2020, 1-16. [Google Scholar]
  23. Li, W., W. Yu, Q. Xu, J. Zhou, H. Nan, Y. Yin, and X. Shen, Understanding the atomistic deformation mechanisms of polycrystalline ?-TiAl under nanoindentation: Effect of lamellar structure. Journal of Alloys and Compounds, 2020. 828, 154443. [CrossRef] [Google Scholar]
  24. Oliver, W.C. and G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Journal of materials research, 1992. 7(6), 1564-1583. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.