EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 369 (2022) MATEC Web Conf., 369 (2022) 04002 References
Open Access
Issue
MATEC Web Conf.
Volume 369, 2022
40th Annual Conference - Meeting of the Departments of Fluid Mechanics and Thermomechanics in the connection with XXIII. International Scientific Conference - The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy (40th. MDFMT & XXIII. AEaNMiFMaE-2022)
Article Number 04002
Number of page(s) 13
Section Current Problems in the Energy
DOI https://doi.org/10.1051/matecconf/202236904002
Published online 04 November 2022
  1. Biheller H. J.: Radial Force on the Impeller of Centrifugal Pumps With Volute, Semivolute, and Fully Concentric Casings, Journal of Engineering for Power, July 1965, 319-322 [Google Scholar]
  2. Csanady G. T.: Radial Forces in a Pump Impeller Caused by a Volute Casing, Journal of Engineering for Power, October 1962, 337-340 [Google Scholar]
  3. Barrio R., Fernández J., Blanco E., Parrondo J.: Estimation of radial load in centrifugal pumps using computational fluid dynamics, European Journal of Mechanics B/Fluids 30 (2011) 316–324 [CrossRef] [Google Scholar]
  4. Zou Z., Wanga F., Yao Z., Tao R., Xiao R., Li H.: Impeller radial force evolution in a large double-suction centrifugal pump during startup at the shut-off condition, Nuclear Engineering and Design 310 (2016) 410–417 [CrossRef] [Google Scholar]
  5. Yu-qin W., Ze-wen D.: Influence of blade number on flow-induced noise of centrifugal pump based on CFD/CA, Vacuum 172 (2020) 109058 [Google Scholar]
  6. Godbole V., Patil R., Gavade S.S.: Axial Thrust in Centrifugal Pumps – Experimental Analysis, 15th International Conference on Experimental Mechanics, Porto/Portugal, 22-27 July 2012 [Google Scholar]
  7. Meng D., Jiang T., Deng H, and Hou G.: Numerical Simulation Research on Radial Force of Centrifugal Pump with Guide Vanes, Hindawi Shock and Vibration Volume 2021, Article ID 6638123, 10 pages, https://doi.org/10.1155/2021/6638123 [Google Scholar]
  8. Kang C., Zhua Y., Lia Q.: Effects of hydraulic loads and structure on operational stability of the rotor of a molten-salt pump, Engineering Failure Analysis 117 (2020) 104821 [CrossRef] [Google Scholar]
  9. Karaskiewicz K., Szlaga M.: Experimental And Numerical Investigation Of Radial Forces Acting On Centrifugal Pump Impeller, Archive of Mechanical Engineering Vol. LXI 2014 Number 3 10.2478/meceng-2014-0025 [Google Scholar]
  10. Cui B., Li J., Zhang C., and Zhang Y.: Analysis of Radial Force and Vibration Energy in a Centrifugal Pump, Mathematical Problems in Engineering Volume 2020, Article ID 6080942, 12 pages https://doi.org/10.1155/2020/6080942 [Google Scholar]
  11. Alemi H., Nourbakhsh S. A., Raisee M. and Najafi A. F.: Development of new “multivolute casing” geometries for radial force reduction in centrifugal pumps, Engineering Applications of Computational Fluid Mechanics, 2015 vol. 9, no. 1, 1–11, http://dx.doi.org/10.1080/19942060.2015.1004787 [CrossRef] [Google Scholar]
  12. Adkins D. R., Brennen C. E.: Analyses of Hydrodynamic Radial Forces on Centrifugal Pump Impellers, Transactions of the ASME, Vol. 110, MARCH 1988, p. 20-28 [Google Scholar]
  13. Iversen H. W., Rolling R. E., Carlson J. J.: Volute Pressure Distribution, Radial Force on the Impeller, and Volute Mixing Losses of a Radial Flow Centrifugal Pump, Transactions of the ASME, April 1960, p. 136-143 [Google Scholar]
  14. Chu W., Wang Y., Tan L.,Xu Y., Numerical investigation of clocking effect on a centrifugal pump with inlet guide vanes, Emaraldinsight, 33 471 (2016) [Google Scholar]
  15. Wang Y., Ding Z., Influence of blade number on flow -included noise of centrifugal pump based on CFD/CA, Elsevier, (2020), p. 1-8 [Google Scholar]
  16. Chalghoum I., Elaoud S., Kanfoudi H., Akrout M., The effects of the rotor-stator interaction on unsteady pressure pulsation and radial force in a centrifugal pump, Springer (2018), p. 672-681 [Google Scholar]
  17. Karaskiewicz K., Slaga M., Experimental and numerical investigation od radial forces acting on centrifugal pump impeller, Manuscript (2013), p. 445-454 [Google Scholar]
  18. Zou Z., Wang F., Yao Z., Tao R., Xiao R., Li H., Impeller radial force evolution in a large double-suction centrifugal pump during startup at the shut-off condition, Elsevier (2016), p. 410-417 [Google Scholar]
  19. Wei-dong C., Xun D., Qi-xiang H., Effect of impeller reflux balance holes on pressure and axial force of centrifugal pump, Springer (2015), p. 1695-1706 1699 [Google Scholar]
  20. Kim, J. H., Choi, Y. S., State-of-the-Art Design Technique of a Single-Channel Pump for Wastewater Treatment, IntechOpen (2018) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.