Open Access
MATEC Web Conf.
Volume 364, 2022
International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2022)
Article Number 03006
Number of page(s) 8
Section Condition Assessment of Concrete Structures - Degradation and Condition Assessment
Published online 30 September 2022
  1. R.M. Ferreira, Probability-Based Durability Analysis of Concrete Structures in Marine Environment, (2004). [Google Scholar]
  2. J. Broomfield, Introduction, In: Corrosion of Steel in Concrete: Understanding, Investigation and Repair, Crc Press, (2003). [Google Scholar]
  3. C. Andrade, A. Cesetti, G. Mancini, F. Tondolo, Estimating Corrosion Attack in Reinforced Concrete by Means of Crack Opening, Struct. Concr. 17 (2016) 533–540. [CrossRef] [Google Scholar]
  4. G. Malumbela, M. Alexander, P. Moyo, Model for Cover Cracking of RC Beams Due to Partial Surface Steel Corrosion, Constr. Build. Mater. 25 (2011) 987–991. [CrossRef] [Google Scholar]
  5. I. Khan, R. François, A. Castel, Prediction of Reinforcement Corrosion Using Corrosion Induced Cracks Width in Corroded Reinforced Concrete Beams, Cem. Concr. Res. 56 (2014) 84–96. [CrossRef] [Google Scholar]
  6. T. Dyer, Corrosion of Steel Reinforcement in Concrete, In: Concrete Durability, Crc Press, (2014). [CrossRef] [Google Scholar]
  7. S.O. Nwaubani, A. Katsanos, Effect of Alternative De-Icers on the Corrosion Resistance of Reinforced Concrete Bridges and Highway Structures, In: Developments in Corrosion Protection, InTech, (2014). [Google Scholar]
  8. R. Zhang, A. Castel, R. François, Concrete Cover Cracking with Reinforcement Corrosion of RC Beam during Chloride-Induced Corrosion Process, Cem. Concr. Res. 40 (2010) 415–425. [CrossRef] [Google Scholar]
  9. L. Yu, R. François, V.H. Dang, V. L’Hostis, R. Gagné, Distribution of Corrosion and Pitting Factor of Steel in Corroded RC Beams, Constr. Build. Mater. 95 (2015) 384–392. [CrossRef] [Google Scholar]
  10. U.M. Angst, Challenges and Opportunities in Corrosion of Steel in Concrete, Mater. Struct. 51 (2018). [CrossRef] [Google Scholar]
  11. C. Andrade, M.C. Alonso, J.A. Gonzalez, An Initial Effort to Use the Corrosion Rate Measurements for Estimating Rebar Durability, In: Corrosion Rates of Steel in Concrete, ASTM Symposium, (1988). [Google Scholar]
  12. C. Andrade, C. Alonso, J.A. Gonzalez, J. Rodriguez, Remaining Service Life of Corroding Structures, In: Durability of Structures. IABSE Symposium, (1989). [Google Scholar]
  13. J. Rodriguez, L.M. Ortega, J. Casal, J.M. Diez, Corrosion of Reinforcement and Service Life of Concrete Structures, Durab. Build. Mater. Compon. 7 (1996) 117–126. [Google Scholar]
  14. C. Alonso, C. Andrade, J. Rodriguez, J.M. Diez, Factors Controlling Cracking of Concrete Affected by Reinforcement Corrosion, Mater. Struct. 31 (1998) 435–441. [CrossRef] [Google Scholar]
  15. T. Vidal, A. Castel, R. François, Analyzing Crack Width to Predict Corrosion in Reinforced Concrete, Cem. Concr. Res. 34 (2004) 165–174. [CrossRef] [Google Scholar]
  16. C. Andrade, C. Alonso, F.J. Molina, Cover Cracking as a Function of Bar Corrosion: Part IExperimental Test, Mater. Struct. 26 (1993) 453–464. [CrossRef] [Google Scholar]
  17. F.J. Molina, C. Alonso, C. Andrade, Cover Cracking as a Function of Rebar Corrosion: Part 2—Numerical Model, Mater. Struct. 26 (1993) 532–548. [CrossRef] [Google Scholar]
  18. Y. Zhao, J. Yu, B. Hu, W. Jin, Crack Shape and Rust Distribution in Corrosion-Induced Cracking Concrete, Corros. Sci. 55 (2012) 385–393. [CrossRef] [Google Scholar]
  19. B.H. Oh, K.H. Kim, B.S. Jang, J.S. Kim, S.Y. Jang, Realistic Model for Corrosion-Induced Cracking in Reinforced Concrete Structures, (2007). [Google Scholar]
  20. S. Muthulingam, B.N. Rao, Non-Uniform Corrosion States of Rebar in Concrete under Chloride Environment, Corros. Sci. 93 (2015) 267–282. [CrossRef] [Google Scholar]
  21. Y. Zhao, W. Jin, Steel Corrosion-Induced Concrete Cracking, Butterworth-Heinemann, (2016). [Google Scholar]
  22. M.Y.H. Bangash, Numerical Modelling of Concrete Strength and Failure, In: Concrete and Concrete Structures: Numerical Modelling and Applications, Elsevier Applied Science, (1989). [Google Scholar]
  23. E. Chen, C.K.Y. Leung, Numerical Modelling of Non-Uniform Steel Corrosion Development and Its Mechanical Influences on Reinforced Concrete Structures, In: VIII International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-8), (2013). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.