Open Access
Issue
MATEC Web Conf.
Volume 363, 2022
5th International Conference on Advances in Materials, Machinery, Electronics (AMME 2022)
Article Number 01009
Number of page(s) 5
Section Research papers
DOI https://doi.org/10.1051/matecconf/202236301009
Published online 29 August 2022
  1. Katnam, K.B., L.F.M. Da Silva, and T.M. Young, Bonded repair of composite aircraft structures: A review of scientific challenges and opportunities. Progress in Aerospace Sciences, 2013. 61: p. 26–42. [CrossRef] [Google Scholar]
  2. Thirumalai Kumaran, S., et al., Rotary ultrasonic machining of woven CFRP composite in a cryogenic environment. Journal of Alloys and Compounds, 2017. 698: p. 984–993. [CrossRef] [Google Scholar]
  3. Jia, C., et al., Improving the Mechanical and Surface Properties of Aramid Fiber by Grafting with 1,4-Dichlorobutane under Supercritical Carbon Dioxide. Materials (Basel, Switzerland), 2019. 12(22): p. 3766. [CrossRef] [Google Scholar]
  4. Osborne, J., Automotive Composites – in Touch with Lighter and More Flexible Solutions. Metal Finishing, 2013. 111(2): p. 26–30. [CrossRef] [Google Scholar]
  5. El-Hofy, M.H. and H. El-Hofy, Laser beam machining of carbon fiber reinforced composites: a review. The International Journal of Advanced Manufacturing Technology, 2019. 101(9): p. 2965–2975. [CrossRef] [Google Scholar]
  6. Lopresto, V., A. Caggiano, and R. Teti, High Performance Cutting of Fibre Reinforced Plastic Composite Materials. Procedia CIRP, 2016. 46: p. 71–82. [CrossRef] [Google Scholar]
  7. Dutta, H., K. Debnath, and D.K. Sarma, Investigation on cutting of thin carbon fiber-reinforced polymer composite plate using sandwich electrode-assisted wire electrical-discharge machining. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2021. 235(5): p. 1628–1638. [CrossRef] [Google Scholar]
  8. Wu, C.-W., X.-Q. Wu, and C.-G. Huang, Ablation behaviors of carbon reinforced polymer composites by laser of different operation modes. Optics & Laser Technology, 2015. 73: p. 23–28. [CrossRef] [Google Scholar]
  9. Bluemel, S., et al., Comparative Study of Achievable Quality Cutting Carbon Fibre Reinforced Thermoplastics Using Continuous Wave and Pulsed Laser Sources. Physics Procedia, 2014. 56: p. 1143–1152. [CrossRef] [Google Scholar]
  10. Wu, Y., et al., The cutting process and damage mechanism of large thickness CFRP based on water jet guided laser processing. Optics & Laser Technology, 2021. 141: p. 107140. [CrossRef] [Google Scholar]
  11. Freitag, C., et al., High-speed Observation of the Heat Flow in CFRP During Laser Processing. Physics Procedia, 2012. 39: p. 171–178. [CrossRef] [Google Scholar]
  12. Hu, J. and D. Zhu, Experimental study on the picosecond pulsed laser cutting of carbon fiber-reinforced plastics. Journal of Reinforced Plastics and Composites, 2018. 37(15): p. 993–1003. [CrossRef] [Google Scholar]
  13. Xu, L., et al., Study on the mechanism of inhomogeneous microdamage in short-pulse laser processing of carbon fiber reinforced plastic. Journal of Reinforced Plastics and Composites, 2021. 40(15-16): p. 568–576. [CrossRef] [Google Scholar]
  14. Jung, K.-W., Y. Kawahito, and S. Katayama, Ultrahigh speed disk laser cutting of carbon fiber reinforced plastics. Journal of Laser Applications, 2011. 24(1): p. 012007. [Google Scholar]
  15. Zhang, Y. and L. Qi. Experimental investigation on fiber laser cutting carbon fiber reinforced plastics. in Proc.SPIE. 2020. [Google Scholar]
  16. Rao B.S.D., A. Sethi, and A.K. Das, Fiber laser processing of GFRP composites and multi-objective optimization of the process using response surface methodology. Journal of Composite Materials, 2018. 53(11): p. 1459–1473. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.