Open Access
MATEC Web Conf.
Volume 361, 2022
Concrete Solutions 2022 – 8th International Conference on Concrete Repair, Durability & Technology
Article Number 05004
Number of page(s) 6
Section Theme 5 - Concrete and Admixture Technology
Published online 30 June 2022
  1. E. Holt, “Contribution of mixture design to chemical and autogenous shrinkage of concrete at early ages,” Cem. Concr. Res., vol. 35, no. 3, pp. 464–472, 2005, doi: 10.1016/j.cemconres.2004.05.009. [CrossRef] [Google Scholar]
  2. E. E. Holt, “Early age autogenous shrinkage of concrete,” VTT Publ., no. 446, pp. 2–184, 2001. [Google Scholar]
  3. Q. H. Do, “Modelling Properties of Cement Paste from Microstructure: Porosity, Mechanical Properties, Creep and Shrinkage,” EPFL, 2013. [Google Scholar]
  4. L. Wu, N. Farzadnia, C. Shi, Z. Zhang, and H. Wang, “Autogenous shrinkage of high performance concrete: A review,” Constr. Build. Mater., vol. 149, pp. 62–75, 2017, doi: 10.1016/j.conbuildmat.2017.05.064. [CrossRef] [Google Scholar]
  5. D. P. Bentz, “A review of early-age properties of cement-based materials,” Cem. Concr. Res., vol. 38, no. 2, pp. 196–204, 2008, doi: 10.1016/j.cemconres.2007.09.005. [CrossRef] [Google Scholar]
  6. T. Lu, “Autogenous shrinkage of early age cement paste and mortar,” Delft University of Technology, 2019. [Google Scholar]
  7. D. Snoeck, O. M. Jensen, and N. De Belie, “The influence of superabsorbent polymers on the autogenous shrinkage properties of cement pastes with supplementary cementitious materials,” Cem. Concr. Res., vol. 74, pp. 59–67, 2015, doi: 10.1016/j.cemconres.2015.03.020. [CrossRef] [Google Scholar]
  8. T. Lu, Z. Li, and H. Huang, “Effect of supplementary materials on the autogenous shrinkage of cement paste,” Materials (Basel)., vol. 13, pp. 1–15, 2020, doi: 10.3390/ma13153367. [Google Scholar]
  9. Y. K. Cho, S. H. Jung, and Y. C. Choi, “Effects of chemical composition of fly ash on compressive strength of fly ash cement mortar,” Constr. Build. Mater., vol. 204, pp. 255–264, 2019, doi: 10.1016/j.conbuildmat.2019.01.208. [CrossRef] [Google Scholar]
  10. Y. Lv, H. Huang, G. Ye, and G. De Schutter, “Autogenous Shrinkage of Low Water-Binder Ratio Cement Pastes with Supplementary Cementitious Materials,” in 4th International Conference on Sustainable Construction Materials and Technologies, 2016, pp. 1–8, [Online]. Available: [Google Scholar]
  11. B. Kumar Sarath Chandra and P. Saha, “Contribution of Fly ash to the properties of Mortar and Concrete,” Int. J. Earth Sci. Eng., vol. 04, no. October 2011, pp. 1017–1023, 2011. [Google Scholar]
  12. “HRN EN 196-3:2016 Methods of testing cement -- Part 3: Determination of setting times and soundness.” . [Google Scholar]
  13. “HRN EN 1015-11:2019 Methods of test for mortar for masonry -- Part 11: Determination of flexural and compressive strength of hardened mortar.” . [Google Scholar]
  14. L. Li, A. G. P. Dabarera, and V. Dao, “Time-zero and deformational characteristics of high performance concrete with and without superabsorbent polymers at early ages,” Constr. Build. Mater., vol. 264, p. 120262, 2020, doi: 10.1016/j.conbuildmat.2020.120262. [CrossRef] [Google Scholar]
  15. H. Huang and G. Ye, “Examining the ‘time-zero’ of autogenous shrinkage in high/ultra-high performance cement pastes,” Cem. Concr. Res., vol. 97, pp. 107–114, 2017, doi: 10.1016/j.cemconres.2017.03.010. [CrossRef] [Google Scholar]
  16. “HZN: HRN EN 12390-16:2019 Ispitivanje očvrsnuloga betona -- 16. dio: Određivanje skupljanja betona (EN 12390-16:2019).” . [Google Scholar]
  17. “ASTM C1698-19, Standard Test Method for Autogenous Strain of Cement Paste and Mortar.” ASTM International, 2019. [Google Scholar]
  18. I. De La Varga, J. Castro, D. Bentz, and J. Weiss, “Application of internal curing for mixtures containing high volumes of fly ash,” Cem. Concr. Compos., vol. 34, no. 9, pp. 1001–1008, 2012, doi: 10.1016/j.cemconcomp.2012.06.008. [CrossRef] [Google Scholar]
  19. C. F. Lu, W. Wang, J. H. Jiang, and M. Hao, “Micro-environment temperature and relative humidity response of fly ash concrete under natural climatic conditions,” Adv. Cem. Res., vol. 29, no. 6, pp. 236–245, 2017, doi: 10.1680/jadcr.16.00040. [Google Scholar]
  20. E. Tazawa, Japan Concrete Institute (JCI), “Autogenous shrinkage of concrete,” 1999. [Google Scholar]
  21. M. Wyrzykowski, Z. Hu, S. Ghourchian, K. Scrivener, and P. Lura, “Corrugated tube protocol for autogenous shrinkage measurements: review and statistical assessment,” Mater. Struct. Constr., vol. 50, no. 1, pp. 1–14, 2017, doi: 10.1617/s11527-016-0933-2. [CrossRef] [Google Scholar]
  22. Z. Hu et al., “A review on testing methods for autogenous shrinkage measurement of cement-based materials,” J. Sustain. Cem. Mater., vol. 2, no. 2, pp. 161–171, 2013, doi: 10.1080/21650373.2013.797937. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.