Open Access
Issue |
MATEC Web Conf.
Volume 361, 2022
Concrete Solutions 2022 – 8th International Conference on Concrete Repair, Durability & Technology
|
|
---|---|---|
Article Number | 05002 | |
Number of page(s) | 8 | |
Section | Theme 5 - Concrete and Admixture Technology | |
DOI | https://doi.org/10.1051/matecconf/202236105002 | |
Published online | 30 June 2022 |
- Abbas, S. Nehdi, M.L, Saleem, M.A., (2016). “Ultra-High Performance Concrete: Mechanical Performance, Durability, Sustainability and Implementation Challenges” International Journal of Concrete Structures and Materials. Vol., 10, p.p. 271–295 [CrossRef] [Google Scholar]
- Andrade C, D’Andrea R, Rebolledo N., (2014). “Chloride ion penetration in concrete: The reaction factor in the electrical resistivity model”. [Google Scholar]
- Anusiya M, Oviya S, (2017). “Comparative study on reactive powder concrete with high strength concrete”. [Google Scholar]
- Baril, M., et. all, (2016)’’The Effect of Casting Flow Defects on the Flexural Behavior of 2-way UHPFRC Slabs Investigated by Digital Image Correlation and Magnetic Assessment’’, First International Interactive Symposium on UHPC. [Google Scholar]
- BFG Architecture, (2019).’’Introduction to UHPC’’ Available at: http://www.bfgarchitecture.com/introduction-to-uhpc) [Accessed: 5th Decomber, 2019] [Google Scholar]
- BFT International, (2020). ’’Classification of ultra-high-performance concrete’’. Available at: https://www.bft-international.com/en/artikel/bft_Classification_of_ultra-high-performance_concrete_3491462.html [Accessed: 5th Feb, 2020] [Google Scholar]
- Brouwer, G. (2001) “Bridge to the future,” Civil Engineering Magazine, vol. 71, pp11. [Google Scholar]
- Brühwiler, E. and Denarié, E. (2013). “Rehabilitation and Strengthening of Concrete Structures Using Ultra-High Performance Fibre Reinforced Concrete,” Structural Engineering International, vol. 23 no.4., pp. 450–457. [CrossRef] [Google Scholar]
- Brühwiler, E., (2016). “Structural UHPFRC”: Welcome to the post-concrete era! First International Interactive Symposium on UHPC. [Google Scholar]
- Bruhwiller, E. (2011) “Entwurf, Bemessung und Ausfuhrung von Stahl-UHFB – Stahlbeton Verbundbauteilen[ design and construction of steel fibre-reinforced UHPC/RC composite members], Ultra-Hochleistungs-faserbeton, entwerfen, bemessen, bauen [design and construction of fribre-reinforced UHPC]”. conf. paper., pp. 121–136. [Google Scholar]
- Buttignol TET, Sousa JLAO, Bittencourt TN. Ultra High-Performance Fiber-Reinforced Concrete (UHPFRC): A review of material properties and design procedures. Rev IBRACON Estrut Mater 2017; 10(4): 957–71. [CrossRef] [Google Scholar]
- Chao, S., et.all., (2016)’’Seismic Behavior of Ultra-High-Performance Fiber Reinforced Concrete Moment Frame Members’’. First International Interactive Symposium on UHPC. [Google Scholar]
- Collins, J., et.all., (2014). “State of The Practice and Art for Structural Health Monitoring of Bridge Substructures” Report. FHWA-HRT-09-040. [Google Scholar]
- Contec Group, (2020). Available at: http://www.contec-aps.com/history.html [Accessed 1st February, 2020] [Google Scholar]
- Coufal, R., et.all., (2016).’’The First Large Application of UHPC in the Czech Republic’’ First International Interactive Symposium on UHPC. [Google Scholar]
- De La Varga, I., Z. B. Haber, and B. Graybeal. (2017). “Bond of Field-Cast Grouts to Precast Concrete Elements”. Report.no. FHWA-HRT-16-081. [Google Scholar]
- De La Varga, SES Group, and Dr. Benjamin A. Graybeal, (2017). “One Step Ahead: FHWA Investigates Commercially”. Journal ASPIRE, pp. 44–46. [Google Scholar]
- D’mello, S., (2005). "Explosion resistant cement in UAE". Khaleej Times. Retrieved 25 November 2020. [Google Scholar]
- Doiron, G., (2016). “PIER REPAIR/RETROFIT USING UHPC EXAMPLES OF COMPLETED PROJECTS IN NORTH AMERICA. Project Manager Repair and Retrofit Markets - Ductal®, Lafarge North America Inc., Canada” First International Interactive Symposium on UHPC. [Google Scholar]
- Ductal, (2016). Available at: https://www.ductal.com/en/engineering/hammersmith-flyover-post-tension-anchorage [Accessed 28th May, 2019] [Google Scholar]
- Ductal, (2020). Available at: https://www.ductal.com/en [Accessed 21st August, 2020] [Google Scholar]
- Edwin, P. S.; Zhijun.C., Muhammad.H., (2019).’’Review of The Cement-Based Composite Ultra-High-Performance Concrete (UHPC)’’. Open Civil Engineering Journal, 2019. Vol. 13, pp.147–162. [CrossRef] [Google Scholar]
- El-Hacha, R., Dona, C., (2018).” Behaviour of Hybrid FRP-UHPC beams subjected to static flexural loading’’ Composites, Part B vol.43, pp. 582–593. [Google Scholar]
- Fehling. E, Schmidt. M, Walraven. J., Leutbecher. T., Frochlich. S, (2015). ‘‘Ultra-High Performance Concrete Uhpc”. Fundamentals, Design, Examples (Beton-Kalender). [Google Scholar]
- FHWA, (2014). “State of the Practice and Art for Structural Health Monitoring of Bridge Substructures” PUBLICATION NO. FHWA-HRT-09-040. [Google Scholar]
- FHWA, Graybeal, B., (2019). “Design and Construction of Field-Cast UHPC Connections’’ (FHWA-HRT-19-011), Available at: https://cms7.fhwa.dot.gov/research/structures/ultra-high-performance-concrete/ultra-high-performance-concrete) [Accessed: 20th January, 2020] [Google Scholar]
- Graybeal BA. "Material property characterization of ultra-high performance concrete", Federal Highway Administration: Virginia, USA, 2006. [Google Scholar]
- Graybeal, B. A., Lwin, M. M., (1997). “Deployment of Ultra-High-Performance Concrete Technology”. [Google Scholar]
- Graybeal, B.A. (2010).”Finite Element Analysis of UHPC: Structural Performance of an AASHTO Type II Girder and a 2nd-Generation Pi-Girder”. Report no. FHWA-HRT-10-079. [Google Scholar]
- György L. Balázs, (2014). Material and Structural Properties for Creating High Performance Concrete Structures, Key Engineering Materials, 10.4028/www.scientific.net/KEM.629-630.21, 629-630, (21-27). [Google Scholar]
- Habel K, Gauvreau P., (2008). “Cement & concrete composites response of ultra-high performance fiber reinforced concrete (UHPFRC) to impact and static loading”. [Google Scholar]
- Hermann, W., (2011) “UHPC-ANCHOR PLATES FOR PT TENDONS, GROUND ANCHORS AND MICRO PILES’’. ib Symposium PRAGUE 2011 Topic 3. Poster Session. [Google Scholar]
- Hicon, (2019). Available at: https://www.hi-con.com/concrete-blog/crc-jointcast-joints-that-are-small-strong-and-simple-1 [Accessed 1st March, 2019] [Google Scholar]
- ICRI Committee 310, (2013). “Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings, Polymer Overlays, and Concrete Repair”. International Concrete Repair Institute, Rosemont, IL. [Google Scholar]
- Krauss, P., Lawler, J., and Steiner, K. (2009). “Guidelines for Selection of Bridge Deck Overlays, Sealers, and Treatments”. NCHRP Project 20-07 Report, p.p. 51. [Google Scholar]
- Larrard, F. S., (1994). T: Optimization of ultra-high-performance concrete by the use of a packing model. Cement and Concrete Research, vol. 24, no. 6, pp. 997–1009. [CrossRef] [Google Scholar]
- Lee MG, Te Chiu C, Wang YC (2005). “The study of bond strength and bond durability of reactive powder concrete”. [Google Scholar]
- Liu K, Yu R, Shui Z, et al. (2018). “Effects of pumice-based porous material on hydration characteristics and persistent shrinkage of Ultra-High Performance Concrete (UHPC)”. [Google Scholar]
- Losic, D., Ho, et. al. (2020). ‘‘Electrochemically produced graphene with ultra large particles enhances mechanical properties of Portland cement mortar.’’ [Google Scholar]
- Losic, D., Ho, V.D., Ng, C., Ozbakkaloglu, T., Goodwin, A., McGuckin, A., Karunagaran, R.,(2020) ‘‘Influence of pristine graphene particle sizes on physicochemical, microstructural and mechanical properties of Portland cement mortars’’. Construction and Building Materials. [Google Scholar]
- Meng, W., et. al., (2018). “Flexural behaviors of fiber-reinforced polymer fabric reinforced ultra-high performance concrete panels’’. Cement and Concrete Composites, vol. 93, pp. 43–53. [CrossRef] [Google Scholar]
- Metrostav, J.L.V., et. all., (2016).” UHPC Connection of Precast Bridge Deck”. First International Interactive Symposium on UHPC. [Google Scholar]
- Miller, Steven H., (2007). “The “Explosion” in Blast Resistant Construction”. Masonry Construction. Retrieved 25 November 2020. [Google Scholar]
- Nagataki, S., (1997)”High-Strength Concrete in Japan: History and Progress”. International Concrete Abstracts Portal Symposium Paper.] [Google Scholar]
- Ole M. J.,(2012) “The Pozzolanic reaction of silica fume”. XXI International Materials Research Congress, 2012. Cancún, Mexico Vol.1488. [Google Scholar]
- Pyo S, Abate SY, Kim HK. Abrasion resistance of ultra high performance concrete incorporating coarser aggregate. Constr Build Mater 2018; 165: 11-6. [CrossRef] [Google Scholar]
- Pyo S, Abate SY, Kim HK., (2018). “Abrasion resistance of ultra high performance concrete incorporating coarser aggregate”. vol.165: p.p.11-6. [Google Scholar]
- Ramboll, (2015). Available at: https://uk.ramboll.com/projects/ruk/hammersmith-flyover-phase-2 [Accessed 22ndMarch, 2019] [Google Scholar]
- Redaelli, D; Muttoni, A., (2007) “Tensile Behaviour of Reinforced Ultra-High Performance Fiber Reinforced Concrete Elements”. Proceedings of CEB-FIP Symposium Dubrovnik. Concrete Structures. [Google Scholar]
- Rossi, P., (1997). “High performance multimodal fiber reinforced cement composites (HPMFRCC): The LCPC experience,” ACI Materials, vol. 94, no. 6, pp. 478–483. [Google Scholar]
- S. Karthik and Karthik Sundaravadivelu* (2017)”Retrofitting of Reinforced Concrete Beams using Reactive Powder Concrete (RPC) Retrofitting of Reinforced Concrete Beams using Reactive Powder Concrete (RPC)”. [Google Scholar]
- Sabet FA, Libre NA, Shekarchi M., (2013). “Mechanical and durability properties of self-consolidating high performance concrete incorporating natural zeolite, silica fume and fly ash”. Construction & Building Materials vol.44. [Google Scholar]
- Schmidt M, Fehling E, Teichmann T. (2003) Ultra-high performance concrete: Perspective for the precast concrete industry. Bet und Fert p.p. 10–23. [Google Scholar]
- Schöck, (2019). “Schöck Isolink. Your link to the facade. Thermal bridge free anchors for sandwich and double walls”. Technical brochure no 190321. [Google Scholar]
- Schöck, (2020). “Schöck Isokorb. Meisterhaft bis in die letzte Faser. Der Schöck Isokorb® CXT”. Technical brochure no. 804403/09.2020/DE/200460. [Google Scholar]
- Scott D.A, et. all., (2016). “Influence of Steel Fiber Size and Shape on Quasi-Static Mechanical Properties and Dynamic Impact Properties of Ultra-High Performance Concrete”. First International Interactive Symposium on UHPC. [Google Scholar]
- Shi C., et. All., (2015). “A review on ultra high performance concrete: Part I. Raw materials and mixture design”. Journal of Constrruction and Building Materials vol. 101., p.p.741–51. [CrossRef] [Google Scholar]
- Taktl, (2020). Available at: https://www.taktl-llc.com/what-is-ultra-high-performance-concrete [Accessed 1st February, 2020] [Google Scholar]
- Wan, L., Wedner, R., Cusatis, G., (2016). “Behavior of Ultra High Performance Concrete at Early Age: Experiments and Simulations”. [Google Scholar]
- Won JP, et. al. (2013). “Shrinkage and durability characteristics of eco-friendly fireproof high-strength concrete”. Constr Build Mater vol. 40: p.p. 753–62. [CrossRef] [Google Scholar]
- Wu C, Li J, Su Y., (2018) Ultra-high performance concrete columns Development of Ultra-High Performance Concrete Against Blasts “. [Google Scholar]
- Wu Z, Shi C, He W., (2017) Comparative study on flexural properties of ultra-high performance concrete with supplementary cementitious materials under different curing regimes. Constr Build Mater vol.136: p.p.307–13. [CrossRef] [Google Scholar]
- Yazici Ş, İnan Sezer G. (2007) “Abrasion resistance estimation of high strength concrete”. Engineering Science 2007; vol.13., no.1., p.p 1–6. [Google Scholar]
- Z.B. Haber and B. Graybeal. (2017)” Field Testing of an Ultra-High Performance Concrete Overlay CHAPTER 3. DETAILS OF THE LAPORTE ROAD BRIDGE”. Report no. FHWA-HRT-17-096. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.