EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 357 (2022) MATEC Web Conf., 357 (2022) 04002 References
Open Access
Issue
MATEC Web Conf.
Volume 357, 2022
25th Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2020)
Article Number 04002
Number of page(s) 11
Section Advanced Industrial, Automotive and Green Energy Applications
DOI https://doi.org/10.1051/matecconf/202235704002
Published online 22 June 2022
  1. C. Holman, R. Harrison, X. Querol Review of the efficacy of low emission zones to improve urban air quality in European cities Atmospheric Environment, 111, 161–169 (2015). [Google Scholar]
  2. T. Huera-Lucero, A. Salas-Ruiz, D. Changoluisa, C. Bravo-Medina Towards Sustainable Urban Planning for Puyo (Ecuador): Amazon Forest Landscape as Potential Green Infrastructure Sustainability, 12, 4768 (2020). [CrossRef] [Google Scholar]
  3. Q. Liu, H. Ullah, W. Wan, Z. Peng, L. Hou, T. Qu, S. Ali Haidery Analysis of Green Spaces by Utilizing Big Data to Support Smart Cities and Environment: A Case Study About the City Center of Shanghai ISPRS Int. J. Geo-Inf., 9, 360 (2020). [CrossRef] [Google Scholar]
  4. Ł. Warguła, K.J. Waluś, P. Krawiec Warunki pracy mobilnych maszyn rozdrabniających drewno w aspekcie innowacyjnych systemów sterowania napędem Sylwan, 163, 9, 765–772 (2019). [Google Scholar]
  5. Ł. Warguła, M. Kukla, P. Krawiec, B. Wieczorek Impact of Number of Operators and Distance to Branch Piles on Woodchipper Operation Forests, 11, 5, 598, 2020. [CrossRef] [Google Scholar]
  6. Ł. Warguła, P. Krawiec The research on the characteristic of the cutting force while chipping ofthe Caucasian Fir (AbiesNordmanniana) with a single-shaft woodchipper. IOP Conf. Ser.: Mater. Sci. Eng., 776, 012012, 2020. [CrossRef] [Google Scholar]
  7. Ł. Warguła, J.M. Adamiec, K.J. Waluś, P. Krawiec The characteristics analysis of torque and rotation speed of working unit of branch grinder-introductory research MATEC Web of Conferences, 157, 01021 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  8. D. Wilczyński, K. Talaśka, I. Malujda, P. Jankowiak Experimental research on biomass cutting process. MATEC Web of Conferences, 157, 07016 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  9. M. Berdychowski, K. Talaśka, D. Wilczyński Evaluation of the possibility of using the Drucker-Prager-Cap model in simulations of the densification process of shredded natural materials MATEC Web of Conferences, 254, 02018 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  10. D. Wilczyski Multifactor analysis of experiment parameters on the example of thebiomass cutting process IOP Conf. Ser.: Mater. Sci. Eng., 776, 012013 (2020). [CrossRef] [Google Scholar]
  11. D. Wilczyski, K. Wałęsa, M. Berdychowski, M. Kukla Biomass cutting tests to determine the lowest value of the process force IOP Conf. Ser.: Mater. Sci. Eng., 776, 012014 (2020). [CrossRef] [Google Scholar]
  12. Ł. Warguła, P. Kaczmarzyk, A. Dziechciarz The assessment of fire risk of non-road mobile wood chopping machines Journal of Research and Applications in Agricultural Engineering, 64, 1, 58–64 (2019). [Google Scholar]
  13. Ł. Warguła, K.J. Waluś, P. Krawiec The problems of measuring the temperature of the small engines (SI) on the example of a drive for non-road mobile machines MATEC Web of Conferences, 254, 04004 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  14. Ł. Warguła, M. Kukla, P. Krawiec, B. Wieczorek Reduction in Operating Costs and Environmental Impact Consisting in the Modernization of the Low-Power Cylindrical Wood Chipper Power Unit by Using Alternative Fuel Energies, 13, 2995 (2020). [CrossRef] [Google Scholar]
  15. Ł. Warguła, P. Krawiec, K.J. Waluś, M. Kukla Fuel Consumption Test Results for a Self-Adaptive, Maintenance-Free Wood Chipper Drive Control System Appl. Sci., 10, 2727 (2020). [CrossRef] [Google Scholar]
  16. Ł. Warguła, D. Wojtkowiak, K.J. Waluś, P. Krawiec, B. Wieczorek The analysis of the efficiency of the control system of Wood chipper’s driver with spark-ignition engine based on Skoda combustion engine 1.4 59kW. Transport Means 2017: Proceedings of the 21st International Scientific Conference, Part 2 pp. 452–458 (2017). [Google Scholar]
  17. Ł. Warguła Innovative injection-ignition system in a non-road small engine— construction system. Transport Means 2019: Proceedings of the 23rd International Scientific Conference Part 2 pp 931–935 (2019). [Google Scholar]
  18. K.J. Waluś, Ł. Warguła, P. Krawiec, J.M. Adamiec Legal regulations of restrictions of air pollution madeby non-road mobile machinery—the case study for Europe: A review Environ. Sci. Pollut. Res., 25, 3243–3259 (2018). [CrossRef] [Google Scholar]
  19. M. Macko, K. Tyszczuk, G. Śmigielski, J. Flizikowski, A. Mroziński The use of CAD applications in the design of shredders for polymers MATEC Web of Conferences, 157, 02027 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  20. M. Macko, K. Tyszczuk, G. Śmigielski, A. Mroziński Utility of an unitary-shredding method to evaluate the conditions and selection of constructional features during grinding MATEC Web of Conferences, 157, 05016 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  21. A. Marczuk, J. Caban, A.V. Aleshkin, P.A. Savinykh, A.Y. Isupov, I.I. Ivanov Modeling and Simulation of Particle Motion in the Operation Area of a Centrifugal Rotary Chopper Machine Sustainability, 11, 18, 4873 (2019). [CrossRef] [Google Scholar]
  22. Ł. Warguła, K.J. Waluś, P. Krawiec Small engines spark ignited (SI) for non-road mobile machinery - review. Transport Means 2018: Proceedings of the 22nd International Scientific Conference, Part 2, pp. 585–591 (2018). [Google Scholar]
  23. L. Jakubovičová, M. Sága, M. Handrik Numerical analysis of stiffener for hybrid drive unite. MATEC Web of Conferences, 157, 02015 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  24. M.Y. Sulaiman, M.R. Ayob, I. Meran Performance of single cylinder spark ignition engine fueled by LPG Procedia Engineering, 53, 579–585 (2013). [CrossRef] [Google Scholar]
  25. D. Szpica, J. Czaban Investigating of the combustion process in a diesel engine fueled with conventional and alternative fuels. Transport Means 2019: Proceedings of the 23rd International Scientific Conference, Part 1, pp. 176–181 (2019). [Google Scholar]
  26. D. Szpica Validation of indirect methods used in the operational assessment of LPG vapor phase pulse injectors Measurement, 118, pp. 253–261 (2018). [CrossRef] [Google Scholar]
  27. J. Caban, A. Gniecka, L. Holeša Alternative fuels for diesel engines Advances in Science and Technology Research Journal, 7, 20, pp. 70–74 (2013). [Google Scholar]
  28. J. Caban, P. Ignaciuk Technical-economic aspects of CNG gas usage in buses of urban communication. Engineering For Rural Development, 2129–2133 (2018). [Google Scholar]
  29. Ł. Warguła, P. Krawiec, K.J. Waluś The system and method of controlling the rotational speed of wood chipper drive (original title in Polish: Układ i sposób sterowania prędkością obrotową napędu rębaka do drewna) P.423369 (2017). [Google Scholar]
  30. Ł. Warguła, K. Kukla, B. Wieczorek, P. Krawiec Wood chipper drive speed control system with a spark ignition engine (original title in Polish: Układsterowaniaprędkościąobrotowąnapędurębaka do drewna z silnikiemspalinowym o zapłonieiskrowym) P.433586 (2020). [Google Scholar]
  31. Ł. Warguła Ł.M. Kukla, P. Lijewski, M. Dobrzyński, F. Markiewicz Influence of Innovative Woodchipper Speed Control Systems on Exhaust Gas Emissions and Fuel Consumption in Urban Areas Energies, 13, 3330 (2020). [CrossRef] [Google Scholar]
  32. R. Pecenka, H. Lenz, S.O. Jekayinfa, T. Hoffmann Influence of Tree Species, Harvesting Method and Storage on Energy Demand and Wood Chip Quality When Chipping Poplar, Willow and Black Locust Agriculture, 10, 116 (2020). [CrossRef] [Google Scholar]
  33. B. Wieczorek, Ł. Warguła, D. Rybarczyk Impact of a Hybrid Assisted Wheelchair Propulsion System on Motion Kinematics during Climbing up a Slope Appl. Sci., 10, 1025 (2020). [CrossRef] [Google Scholar]
  34. I. Kuric, V. Bulej, M. Sága, P. Pokorny Development of simulation software for mobile robot path planning within multilayer map system based on metric and topological maps International Journal of Advanced Robotic Systems, 14, 6, (2017). [Google Scholar]
  35. A. Sapietová, M. Sága, I. Kuric, S. Václav Application of optimization algorithms for robot systems designing International Journal of Advanced Robotic Systems, 15, 1, 110 (2018). [Google Scholar]
  36. E. Gawronska A sequential approach to numerical simulations of solidification with domain and time decomposition Applied Sciences, 9, 10, 1972 (2019). [CrossRef] [Google Scholar]
  37. B. Wieczorek, M. Kukla Effects of the performance parameters of a wheelchair on the changes in the position of the centre of gravity of the human body in dynamic condition PloSOne, 14, 12, e0226013 (2019). [CrossRef] [Google Scholar]
  38. M. Kukla, B. Wieczorek, Ł. Warguła, M. Berdychowski An analytical model of the demand for propulsion torque during manual wheelchair propelling. Disability and Rehabilitation: Assistive Technology, 1–8 (2019). [Google Scholar]
  39. B. Wieczorek, M. Kukla Biomechanical Relationships Between Manual Wheelchair Steering and the Position of the Human Body's Center of Gravity Journal of Biomechanical Engineering, 142, 8 (2020). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.