EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 357 (2022) MATEC Web Conf., 357 (2022) 02021 References
Open Access
Issue
MATEC Web Conf.
Volume 357, 2022
25th Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2020)
Article Number 02021
Number of page(s) 14
Section Modelling and Simulation, Structural Optimization
DOI https://doi.org/10.1051/matecconf/202235702021
Published online 22 June 2022
  1. K. Höffl Zerkleinerungs und Klassiermaschinen. Springer-Verlag, Berlin (1986). [Google Scholar]
  2. A. Tomporowski, J. Flizikowski, W. Kruszelnicka A new concept of roller-plate mills. Przemysł Chemiczny. 96, 1750–1755 (2017). [Google Scholar]
  3. R. Koch, A. Noworyta Procesy mechaniczne w inżynierii chemicznej. WNT, Warszawa (1998). [Google Scholar]
  4. J. Flizikowski, A. Al-Zubiedy, M. Macko Multiple disc unit as speed coagulation mixer for soiling of water. 2005 REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology, 2895–2896 (2004). [Google Scholar]
  5. J. Flizikowski, M. Macko The influence of design of shredder on quality of product (Conference paper) REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology 2841–2842 (2005). [Google Scholar]
  6. R. Tuunila Selection of grinding mill for different kinds of materials. Materials of 12th European Symposium on Comminution and Classification (ESCC 2009), Espoo, Finland (2009). [Google Scholar]
  7. J. Flizikowski, M. Macko Competitive design of shredder for plastic in recycling. Ed. By Horvath, I.; Xirouchakis, P. Conference: 5th International Symposium on Tools and Methods of Competitive Engineering Location: Lausanne, Switzerland, 2004. Tools and methods of competitive engineering, vols 1 and 2, pp. 1147–1148 (2004). [Google Scholar]
  8. M. Macko, K. Tyszczuk, G. Śmigielski, A. Mroziński Utility of an unitary-shredding method to evaluate the conditions and selection of constructional features during grinding. MATEC Web of Conferences, 157, 05016 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  9. M. Macko, A. Mroziński, J. Flizikowski Design and utility of specialist comminution set-up for plastics and organic materials. 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 3, 397–402 (2011). [Google Scholar]
  10. K. Tyszczuk, G. Śmigielski Computer-Aided Grinding Process of Oil Seeds in Proceedings of the 36th International Business Information Management Association Conference (IBIMA), 4-5 November 2020, Granada, Spain / ed. Khalid S. Soliman. International Business Information Management Association (IBIMA), 2020, 7995–7998 (2020). [Google Scholar]
  11. M.S. Powell, R.D. Morrison The future of comminution modelling. International Journal of Mineral Processing, 84, 228–239 (2007). [CrossRef] [Google Scholar]
  12. J. Flizikowski, W. Kruszelnicka, M. Macko The Development of Efficient Contaminated Polymer Materials Shredding in Recycling Processes. Polymers, 13, 713 (2021). [CrossRef] [Google Scholar]
  13. Ł. Warguła, M. Kukla, P. Krawiec, B. Wieczorek Impact of Number of Operators and Distance to Branch Piles on Woodchipper Operation. Forests, 11, 598 (2020). [CrossRef] [Google Scholar]
  14. Ł. Warguła, P. Krawiec, J. Adamiec, K. Waluś The investigations of dynamic characteristics of a stepper motor. Procedia Engineering, 177, 318–323 (2017). [CrossRef] [Google Scholar]
  15. T. Rydzkowski Stopień uplastycznienia wytłoczyny uzyskiwanej w warunkach autotermicznej pracy wytłaczarki ślimakowo-tarczowej. Polimery, LIV, 5, 377–381 (2009). [Google Scholar]
  16. P. Krawiec, L. Różański, D. Czarnecka-Komorowska, Ł. Warguła Evaluation of the Thermal Stability and Surface Characteristics of Thermoplastic Polyurethane V-Belt. Materials, 13, 1502 (2020). [CrossRef] [Google Scholar]
  17. T. Klepka, T. Garbacz, E. Bociąga Some properties of extruded porous microducts. Przemysł Chemiczny, 93, 6, 907–910 (2014). [Google Scholar]
  18. T. Klepka Construction of axial-symmetric polymeric extrudates of complex forms. Polimery, 53, 5, 390–395 (2008). [CrossRef] [Google Scholar]
  19. M. Macko, K. Tyszczuk, G. Śmigielski, J. Flizikowski, A. Mroziński The use of CAD applications in the design of shredders for polymers. MATEC Web of Conferences, 157, 02027 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  20. S. Hoyer, L. Kroll, D. Sykutera Technology comparison for the production of fine rubber powder from end of life tyres. Procedia Manufacturing, 43, 193–200 (2020). [CrossRef] [Google Scholar]
  21. M. Macko, A. Mroziński Computer aided design of wood pellet. Lecture Notes in Mechanical Engineering, 454–461 (2019). [CrossRef] [Google Scholar]
  22. M. Macko, A. Mrozinski Work parameters research of wood pellet machine. AIP. Conference Proceedings, 2077 (2019). [Google Scholar]
  23. M. Macko, A. Mrozinski, A. Prentki Simulations CAE of wood pellet machine. MATEC Web of Conferences, 254, 02028 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  24. T. Domański, A. Sapietova, M. Saga Application of Abaqus software for the modeling of surface progressive hardening, 21st Polish-Slovak International Scientific Conference on Machine Modeling and Simulations MMS 2016, Poland. Book Series: Procedia Engineering, 177, 64–69 (2017). [Google Scholar]
  25. G. Śmigielski, K. Tyszczuk, A. Mroziński Analysis of the size of shredded particles in a multi-disc grinder. IOP Conference Series: Materials Science and Engineering, 776 (2020). [Google Scholar]
  26. V. Baniari, M. Blatnická, M. Šajgalík, M. Vaško, M. Sága Measurement and numerical analyses of residual stress distribution near weld joint. Procedia Engineering 192, 22–27 (2017). [CrossRef] [Google Scholar]
  27. B. Leitner, M. Vaško Design and Modelling of Tank Wagon Assembly Operations in CAM Environment. Transport Means, I & II, 87–90 (2015). [Google Scholar]
  28. K. Kędziora, K. Waluś Experimental and simulation research on car acceleration and braking on snow-covered roads; Activities of Transport Telematics: 13th International Conference on Transport Systems Telematics, TST 2013/ed. Jerzy Mikulski: Springer Berlin Heidelberg. Communications in Computer and Information Science, 395, 433–440 (2013). [Google Scholar]
  29. M. Macko, Z. Szczepański, D. Mikołajewski Design and manufacture of artificial organs made of polymers. 23rd Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS). MATEC Web of Conferences, 254 (2019). [Google Scholar]
  30. M. Kajor, D. Grochala, M. Grochala, M. Iwaniec, J. Lemejda Assisted Living System Architecture Based on Bluetooth low Energy and Wearable Sensors. 2020 IEEE 16th International Conference on the Perspective Technologies and Methods in MEMS Design, MEMSTECH 2020. Proceedings, 36-39, 9109466 (2020). [Google Scholar]
  31. M. Macko, Z. Szczepański, D. Mikołajewski, E. Mikołajewska, J. Furtak CAE/FDM methods for design and manufacture artificial organs for exercises purposes. Lecture Notes in Mechanical Engineering, pp. 462–469 (2019). [CrossRef] [Google Scholar]
  32. E. Mikolajewska, M. Macko, Z. Szczepański, D. Mikołajewski Reverse Engineering in Rehabilitation. In Encyclopedia of Information Science and Technology, Fourth Edition, Section: Biomedical Engineering, Chapter 45, 521–528 (2018). [Google Scholar]
  33. M. Macko, Z. Szczepański, D. Mikołajewski, E. Mikołajewska, J. Furtak 3D technology implementation in medicine. 2020 IOP Conference Series: Materials Science and Engineering, 776, 1, 012038 (2020). [CrossRef] [Google Scholar]
  34. M. Macko, Z. Szczepanski, E. Mikolajewska, J. Nowak, D. Mikolajewski Repository of 3D images for education and everyday clinical practice purposes. Bio-Algorithms and Med-Systems, 13, 2, 111–116 (2017). [CrossRef] [Google Scholar]
  35. J. Kopowski, I. Rojek, D. Mikołajewski, M. Macko 3D printed hand exoskeleton - own concept. Lecture Notes in Mechanical Engineering, pp. 298–306 (2019). [CrossRef] [Google Scholar]
  36. J. Flizikowski, M. Macko, J. Czerniak, A. Mroziński Implementation of genetic algorithms into development of mechatronic multi-edge’s grinder design Proc. of ASME International Mechanical Engineering Congress and Exposition (IMECE) Denver, 7, 1227–1235 (2012). [Google Scholar]
  37. I. Kuric, V. Bulej, M. Sága, et al. Development of simulation software for mobile robot path planning within multilayer map system based on metric and topological maps. International Journal of Advanced Robotic Systems, 14, 6 (2017). [Google Scholar]
  38. Z. Sapietová, M. Sága, I. Kuric, et al. Application of optimization algorithms for robot systems designing. International Journal of Advanced Robotic Systems, 15, 1 (2018). [Google Scholar]
  39. Patent for invention: Plastic shredder, no. P385398, UPRP (2013). [Google Scholar]
  40. https://www.solidworks.com/media/solidworks-simulation-premium-description-modules [Google Scholar]
  41. K.-H. Chang Computer-Aided Engineering Design in e-Design. Chapter 17 - Design Optimization. pp. 907–1000 (2015). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.