EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 357 (2022) MATEC Web Conf., 357 (2022) 02009 References
Open Access
Issue
MATEC Web Conf.
Volume 357, 2022
25th Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2020)
Article Number 02009
Number of page(s) 15
Section Modelling and Simulation, Structural Optimization
DOI https://doi.org/10.1051/matecconf/202235702009
Published online 22 June 2022
  1. M. Bosansky, I. Kozuch, M. Veres Hobbing as the possibility of C-C gearing production. The 2nd Int. Conf. „Power Transmissions’06” 25-26 April 2006, pp. 267–270. Novi Sad, Serbia & Montenegro (2006). [Google Scholar]
  2. M. Borzan, R.Ch. Sabau The calculus of axial profile of cavex worm. Annals of MTeM for 2003 & Proceedings of the 6th International MTeM Conference, pp. 73–74, Technical University of Cluj-Napoca, Romania 2003 (2003). [Google Scholar]
  3. M. Pajtásová, D. Ondrusová, R. Janik, Z. Micicová, B. Pecusová, I. Labaj, M. Kokutar, K. Moricová Using of alternative fillers based on the waste and its effect on the rubber properties. Matec Web of Conference, 254, 8 (2019). [Google Scholar]
  4. D. Ondrusová, I. Labaj, J. Vrsková, M. Pajtásová, V. Zvoláneková-Mezencevová Application of alternative additives in the polymer composite systems used in automotive industry. In: IOP Conference Series: Materials Science and Engineering, Vol. 776. Bristol: IOP Institute of Physics (2020). [Google Scholar]
  5. M. Kujawsk, P. Krawiec Analysis of Generation Capabilities of Noncircular CogbeltPulleys on the Example of a Gear with an Elliptical Pitch Line. Journal of Manufacturing Science and Engineering-Transactions of the ASME, 133, 5, 051006 (2011). [CrossRef] [Google Scholar]
  6. P. Krawiec, A. Marlewski Spline description of non-typical gears for belt transmissions. Journal of Theoretical and Applied Mechanics, 49, 2, 355–367 (2011). [Google Scholar]
  7. P. Krawiec, A. Marlewski Profile design of non-circular belt pulleys. Journal of Theoretical and Applied Mechanics, 54, 2, 561–570 (2016). [CrossRef] [Google Scholar]
  8. P. Krawiec Analysis of selected dynamic features of a two-wheeled transmission system. Journal of Theoretical and Applied Mechanics, 55, 2, 461–467 (2017). [CrossRef] [Google Scholar]
  9. P. Boral Technological determinants of the teething geometry of worm gears with either a fixed or variable pitch worm. Czestochowa University Press of the Czestochowa University of Technology (2018). [Google Scholar]
  10. P. Krawiec, M. Grzelka, J. Kroczak, G. Domek, A. Kołodziej A proposal of measurement methodology and assessment of manufacturing methods of non-typical cog belt pulleys. Measurement, 132, 182–190 (2019). [CrossRef] [Google Scholar]
  11. G. Nimann, H. Winter Maschinenelement. Band III, Springer-Verlag. Berlin, Heidelberg, New York, Tokyo (1983). [Google Scholar]
  12. I. Dudas The Theory and Practice of Worm Gear Drives. London Penton Press (2000). [Google Scholar]
  13. F.L. Litvin, A. Fluentes Gear Geometry and Applied Theory. Cambridge University Press (2004). [Google Scholar]
  14. F.L. Litvin Development of Gear Technology and Theory of Gearing. NASA RP-1406 (1998). [Google Scholar]
  15. T. Nieszporek Cutting tool design and external cylindrical toothing technology. Czestochowa University Press of the Czestochowa University of Technology (2013) [Google Scholar]
  16. S.P. Radzevich Gear Cutting Tools: Fundamentals of Design and Computation. London, NY: CRC Press (2010). [Google Scholar]
  17. T. Nieszporek, P. Boral Examination of the cylindrical worm profile. MATEC Web of Conferences, 94 (2016). [Google Scholar]
  18. T. Nieszporek, P. Boral, R. Gołębski An analysis of gearing. The 4th International Conference on Computing and Solutions in Manufacturing Engineering, CoSME’16, pp. 209–210. Transilvania University of Brasov, Romania (2016). [Google Scholar]
  19. T. Nieszporek, R. Gołębski, P. Boral Shaping the helical surface by the hobbing method. Procedia Engineering, 177, 49–56 (2017). [CrossRef] [Google Scholar]
  20. T. Nieszporek, A. Piotrowski, P. Boral, K. Potiomkin Step-by-Step Machining of Spur Gears with Longitudinal Tooth Modification. Theory and Practice of Industrial and Pro (2015). [Google Scholar]
  21. K. Psiuch Building an application for generation a program for a CNC milling machine. Master thesis, Czestochowa University of Technology (2018). [Google Scholar]
  22. P. Boral The design of the CNC milling machine, MATEC Web of Conferences, 254, 01003 (2019). [CrossRef] [EDP Sciences] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.