EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 357 (2022) MATEC Web Conf., 357 (2022) 01006 References
Open Access
Issue
MATEC Web Conf.
Volume 357, 2022
25th Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2020)
Article Number 01006
Number of page(s) 9
Section Methods and Systems in Machine Design
DOI https://doi.org/10.1051/matecconf/202235701006
Published online 22 June 2022
  1. J. Homiśin, P. Kaśśay, M. Puśkar, R. Grega, J. Krajñák, M. Urbansky, M. Moravie 2016 Continuous tuning of ship propulsion system by means of pneumatic tuner of torsional oscillation, International Journal of Maritime Engineering: Transactions of The Royal Institution of Naval Architects. 158, A3, A231–A238 (2016). [Google Scholar]
  2. R. Grega, J. Krajnak J The pneumatic dual-mass flywheel, Scientific Journal of Silesian University of Technology - Series Transport 76 (2012). [Google Scholar]
  3. J. Homiśin Nové typy prużnych hriadei’ovych spojok: vyvoj, vyskum, aplikácia. TU, SjF, Kośice (2002). [Google Scholar]
  4. J. Kostka, P. Frankovsky, P. Carák, V. Neumann Evaluation of residual stresses using optical methods. Acta Mechatronica. - Śemśa (Slovensko), 4S go, 2016 Roc. 4, c. 4, s. 2934 (2019). [Google Scholar]
  5. G. Fedorko, P. Liptai, V. Molnár Proposal of the methodology for noise sources identification and analysis of continuous transport systems using an acoustic camera. Engineering Failure Analysis, 83, 30–46 (2018). [CrossRef] [Google Scholar]
  6. L. Jakubovicová, M. Sága, P. Kopas, M. Handrik M. Vaśko Some Notes on Analysis of Bending and Torsion Combined Loading, Machine Dynamics Research 34, 3, 97–105 (2010). [Google Scholar]
  7. L. Zul’ová, R. Grega, J. Krajñák, G. Fedorko, V. Molnár Optimization of noisiness of mechanical system by using a pneumatic tuner during a failure of piston machine, Engineering Failure Analysis, 79, 845–851 (2017). [CrossRef] [Google Scholar]
  8. M. Pakár, M. Fabian, J. Kádárová, P. Bliśfan, M. Kopas Autonomous vehicle with internal combustion drive based on the homogeneous charge compression ignition technology, In: International Journal of Advanced Robotic Systems, 14, 5, 1–8 (2017). [Google Scholar]
  9. S. Maláková, F. Trebuña, P. Frankovsky Stress Analysis of Eccentric Gear with Asymmetrical Profile of Teeth 2016. American Journal of Mechanical Engineering, 4, 7, 390–393 (2016). [Google Scholar]
  10. M. Moravec, P. Liptai Smart city concept system for the municipal waste disposal. International Journal of Interdisciplinarity in Theory and Practice, 12, 53–56 (2017). [Google Scholar]
  11. M. Laciak, K. Kostúr, M. Durdán, J. Kaćur, P. Flegner The analysis of the underground coal gasification in experimental equipment. Energy, 114, 332–343 (2016). [CrossRef] [Google Scholar]
  12. A. Sapietová, M. Sága, P. Novák Multisoftware platform for solving of multibody systems synthesis, Communications 14, 3, 43–48 (2012). [CrossRef] [Google Scholar]
  13. M. Saga, M. Vasko Stress Sensitivity Analysis of the Beam and Shell Finite Elements. Communications - Scientific Letters ofthe University Zilina, 11, 2, 5–12 (2009). [CrossRef] [Google Scholar]
  14. K. Kostúr, M. Laciak, M. Durdán Some influences of underground coal gasification on the environment. Sustainability, 10, 5, 1–31 (2018). [CrossRef] [Google Scholar]
  15. P. Czech, H. Madej Application of cepstrum and spectrum histograms of vibration engine body for setting up the clearance model of the piston-cylinder assembly for RBF neural classifier. Maintenance and Reliability, 4, 15–20 (2011). [Google Scholar]
  16. G. Wojnar Model-based analysis of influence of coupling parameters on dynamic forces in gear meshing, Transactions of the Universities of Kośice. Ć. 3, s. 21–24 (2009). [Google Scholar]
  17. M. Fabian, M. Puśkar, R. Boslai, M. Kopas, S. Kender, R. Huftady Design of experimental vehicle specified for competition Shell Eco-marathon 2017 according to principles of car body digitisation based on views in 2D using the intuitive tool Imagine and Shape CATIA V5, Advances in Engineering Software, 115, 413–428 (2018). [CrossRef] [Google Scholar]
  18. P. Kaśśay Effect of torsional vibration on woodchip size distribution. Scientific Journal of Silesian University of Technology. Series Transport, 99, 95–104 (2018). [CrossRef] [Google Scholar]
  19. M. Urbansky Comparison of piston and tangential pneumatic flexible shaft couplings in terms of high flexibility. Scientific Journal of Silesian University of Technology. Series Transport, 99, 193–203 (2018). [CrossRef] [Google Scholar]
  20. D. Harachová Decomposition of driving systems specified for rehabilitation machines, Ad Alta: Journal of Interdisciplinary Research, 7, 2, 271–273 (2017). [Google Scholar]
  21. A. Mańka, A. Hełka J. Ćwiek Influence of copper content on pantograph contact strip material on maximum temperature of railroad wire. Scientific Journal of Silesian University of Technology. Series Transport, 2020, 106, 97–105 (2020). [Google Scholar]
  22. A. Sapietová, M. Sága, I. Kuric et al. Application of optimization algorithms for robot systems designing. International Journal of Advanced Robotic Systems, 15, 1 (2018). [Google Scholar]
  23. M. Sága, P. Kopas M. Uhrićik Modeling and experimental analysis of the aluminium alloy fatigue damage in the case of bending - torsion loading. Procedia Engineering, 48, 599–606 (2012). [CrossRef] [Google Scholar]
  24. J. Kulka, M. Mantic, G. Fedorko, V. Molnar Failure analysis of increased rail wear of 200 tons foundry crane track. Eng. Fail. Anal., 67, 1–14 (2016). [CrossRef] [Google Scholar]
  25. P. Czech, G. Wojnar, R. Burdzik, L. Konieczny, J. Warczek Application of the discrete wavelet transform and probabilistic neural networks in IC engine fault diagnostics. J. Vibroengineering, 16, 1619 (2014). [Google Scholar]
  26. L. Jakubovicová, M. Sága, M. Vasko 2013 Impact analysis of mutual rotation of roller bearing rings on the process of contact stresses in rolling elements. Manuf. Technol., 13, 50–54 (2013). [Google Scholar]
  27. J. Homisin et al. Removal of systematic failure of belt conveyor drive by reducing vibrations. In: Engineering Failure Analysis, 99 (2019). [Google Scholar]
  28. H. Rahnejat Multi-body Dynamics: Vehicles, Machines and Mechanisms, Professional Engineering Publishing, Bury St Edmunds, UK (1998). [Google Scholar]
  29. A. Wedin Reduction of Vibrations in Engines using Centrifugal Pendulum Vibration Absorbers, Chalmers University of Technology (2011). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.