EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 357 (2022) MATEC Web Conf., 357 (2022) 01003 References
Open Access
Issue
MATEC Web Conf.
Volume 357, 2022
25th Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2020)
Article Number 01003
Number of page(s) 12
Section Methods and Systems in Machine Design
DOI https://doi.org/10.1051/matecconf/202235701003
Published online 22 June 2022
  1. D. Wojtkowiak, K. Talaśka The influence of the piercing punch profile on the stress distribution on its cutting edge. MATEC Web of Conferences, 254, 02001 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  2. J. Górecki, A. Fierek, K. Talaśka, K. Wałęsa The influence of the limit stress value on the sublimation rate during the dry ice densification process, IOP Conf. Ser.: Mater. Sci. Eng, 776012072 (2020). [Google Scholar]
  3. M. Berdychowski, I. Malujda, K. Wałęsa, A. Fierek Analysis of angular deflection of bearing node in machine with toothed transport belt, IOP Conf. Ser.:Mater. Sci. Eng, 776, 012019 (2020). [Google Scholar]
  4. M. Pajtásová, D. Ondrusová, R. Janík, Z. Micicová, B. Pecusová, I. Labaj, M. Kohutiar, K. Moricová Using of alternative fillers based on the waste and its effect on the rubber properties. MATEC Web of Conferences, 254, 04010 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  5. D. Ondrusová, I. Labaj, J. Vrskov, M. Pajtásová, V. Zvoláneková-Mezencevová Application of alternative additives in the polymer composite systems used in automotive industry IOP Conf. Ser.: Mater. Sci. Eng, 776, 012101 (2020). [Google Scholar]
  6. D. Czarnecka-Komorowska, T. Sterzynski, M. Dutkiewicz Polyoxymethylene/Polyhedral Oligomeric Silsesquioxane Composites Processing, Crystallization, Morphology and Thermo-Mechanical Behavior. International Polymer Processing 31, 5, 598–606 (2016). [CrossRef] [Google Scholar]
  7. D. Czarnecka-Komorowska, T. Sterzynski, M. Dutkiewicz Polyhedral oligomeric silsesquioxanes as modifiers of polyoxymethylene structure, AIP Conference Proceedings 1695020013 (2015). [Google Scholar]
  8. G. Domek, M. Wilczyński Modelling a timing belt pitch. MATEC Web of Conferences, 254, 01011 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  9. D. Wojtkowiak, D Talaśka Determination of the effective geometrical features of the piercing punch for polymer composite belts, International Journal of Advanced Manufacturing Technology, 104, 1-4, 315–332 (2019). [CrossRef] [Google Scholar]
  10. P. Boral, A. Stoić, M. Kljajin Machining of Spur Gears Using a Special Milling Cutter Technical Gazette, 25, 3, 798–802 (2018). [Google Scholar]
  11. T. Nieszporek, P. Boral Examination of the Cylindrical Worm Profile. MATEC Web of Conferences, 94, 07007 (2017). [CrossRef] [EDP Sciences] [Google Scholar]
  12. T. Nieszporek, R. Gołębski, P. Boral Shaping the helical surface by the hobbing method, Procedia Engineering, 177, 49–56 (2017). [CrossRef] [Google Scholar]
  13. E. Gawronska A sequential approach to numerical simulations of solidification with domain and time decomposition. Applied Sciences, 9, 10, 1972 (2019). [CrossRef] [Google Scholar]
  14. J. Winczek, E. Gawronska, M. Gucwa, N. Sczygiol Theoretical and experimental investigation of temperature and phase transformation during SAW overlaying. 9, 7, 1472 (2019). [Google Scholar]
  15. E. Gawrońska, R. Dyja Numerical Calculations of the Cast Solidification with the Complex Shape Including the Movement of the Liquid Phase Archives of Foundry Engineering, 18, 3, 65–70 (2018). [Google Scholar]
  16. P. Krawiec, M. Grzelka, J. Kroczak, G. Domek, A. Kołodziej A proposal of measurement methodology and assessment of manufacturing methods of nontypical cog belt pulleys. Measurement, 132, 182–190 (2019). [CrossRef] [Google Scholar]
  17. M. Kujawski, P. Krawiec Analysis of Generation Capabilities of Noncircular Cog belt Pulleys on the Example of a Gear with an Elliptical Pitch Line Journal of Manufacturing Science and Engineering-Transactions of the ASME 133(5) 051006 (2011). [CrossRef] [Google Scholar]
  18. P. Krawiec, A. Marlewski Profile design of noncircular belt pulleys. Journal of Theoretical and Applied Mechanics 54, 2, 561–570 (2016). [CrossRef] [Google Scholar]
  19. P. Krawiec, A. Marlewski Spline description of non-typical gears for belt transmissions. Journal of Theoretical and Applied Mechanics 49, 2, 355–367 (2011). [Google Scholar]
  20. P. Krawiec, G. Domek, Ł. Warguła, K. Waluś, J. Adamiec The application of the optical system ATOS II for rapid prototyping methods of non-classical models of cogbelt pulleys. MATEC Web of Conferences, 157, 01010 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  21. P. Krawiec Analysis of selected dynamic features of a two-whwwled transmission system. Journal of Theoretical and Applied Mechanics, 55, 2, 461–467 (2017). [CrossRef] [Google Scholar]
  22. P. Krawiec, L. Różański, D. Czarnecka-Komorowska, Ł. Warguła Evaluation of the Thermal Stability and Surface Characteristics of Thermoplastic Polyurethane V-Belt. Materials, 13, 1502 (2020). [CrossRef] [Google Scholar]
  23. P. Krawiec, Ł. Warguła, A. Dziechciarz, D. Małozięć, D. Ondrusová Evaluation of chemical compound emissions during thermal decomposition and combustion of V-belts. Przemysł Chemiczny 99, 1, 92–98 (2020). [Google Scholar]
  24. S. Chowdhury, R.K. Yedavalli, Dynamics of belt-pulley-shaft systems. Mech. Mach. Theory, 98, 199–215 (2016). [CrossRef] [Google Scholar]
  25. Y. Pan, Y. Liu, Y. Shan, G. Chen Complex modal analysis of serpentine belt drives based on beam coupling model. Mech. Mach. Theory, 116, 162–177 (2017). [CrossRef] [Google Scholar]
  26. V.A. Lubarda Determination of the belt force before the gross slip. Mech. Mach. Theory, 83, 31–37 (2015). [CrossRef] [Google Scholar]
  27. G. Cepon, L. Manin, M. Boltezar, Experimental identification of the contact parameters between a v-ribbed belt and a pulley. Mech. Mach. Theory, 45, 10, 14241433 (2020). [Google Scholar]
  28. B. Balta, F.O. Sonmez, A. Cengiz Speed losses in v-ribbed belt drives. Mech. Mach. Theory, 86, 1–14 (2015). [CrossRef] [Google Scholar]
  29. C.F. Silva, L. Manin, R.G. Rinaldi, D. Remond, E. Besnier, M.A. Andrianoely Modeling of power losses in poly-v belt transmissions: hysteresis phenomena (enhanced analysis). Mech. Mach. Theory 121, 8, 373–397 (2018). [CrossRef] [Google Scholar]
  30. C.F. Silva, L. Manin, R.G. Rinaldi, D. Remond, E. Besnier, M.A. Andrianoely Modeling of power losses in poly-v belt transmissions: hysteresis phenomena (standard analysis). JSME, 11, 1–15 (2017). [Google Scholar]
  31. I. Kuric, V. Bulej, M. Sága, et al. Development of simulation software for mobile robot path planning within multilayer map system based on metric and topological mapsInternational. Journal of Advanced Robotic Systems 14, 6, 1–14 (2017). [Google Scholar]
  32. M. Sapietová, M. Sága, I. Kuric et al. Application of optimization algorithms for robot systems designing. International Journal of Advanced Robotic Systems, 15, 1, 1–10 (2018). [Google Scholar]
  33. Ł. Warguła, M. Kukla, P. Krawiec, B. Wieczorek Reduction in Operating Costs and Environmental Impact Consisting in the Modernization of the Low-Power Cylindrical Wood Chipper Power Unit by Using Alternative Fuel. Energies, 13, 2995 (2020). [CrossRef] [Google Scholar]
  34. Ł. Warguła, M. Kukla, P. Krawiec, B. Wieczorek Impact of Number of Operators and Distance to Branch Piles on Woodchipper Operation. Forests, 11, 598 (2020). [CrossRef] [Google Scholar]
  35. Warguła Ł., Krawiec P., Waluś K.J., Kukla M. 2020 Fuel Consumption Test Results for a Self-Adaptive, Maintenance-Free Wood Chipper Drive Control SystemAppl. Sci. 10, 2727 [Google Scholar]
  36. M. Dudziak Przekładnie cięgnowe Warszawa PWN (1997). [Google Scholar]
  37. W. Grzegożek Przekładnie cięgnowe o ciągłej zmianie przełożenia (CVT) w układach napędowych pojazdów. Kraków Wyd. Politechniki Krakowskiej (2011). [Google Scholar]
  38. G. Domek, A. Kołodziej, M. Dudziak, T. Woźniak Identification of the quality of timing belt pulleys. Procedia Engineering 177, 275–280 (2017). [CrossRef] [Google Scholar]
  39. M. Łazarska, T. Woźniak, Z. Ranachowski, A. Trafarski, G. Domek Analysis of acoustic emission signals at austempering of steels using neural networks. Metals and Materials International, 23, 3, 426–433 (2011). [Google Scholar]
  40. M. Wilczyński, G. Domek Influence of tension layer quality on mechanical properties of timing belts. MATEC Web of Conferences, 254, 05010 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  41. T. Domanski, A. Sapietova, M. Saga Application of Abaqus software for the modeling of surface progressive hardening. Procedia Engineering, 177, 64–69 (2017). [CrossRef] [Google Scholar]
  42. M. Sága, P. Kopas, M. Uhrićik Modeling and experimental analysis of the aluminium alloy fatigue damage in the case of bending - torsion loading. Procedia Engineering, 48, 599–606 (2012). [CrossRef] [Google Scholar]
  43. P. Kopas, M. Blatnicky, M. Sága, M. Vasko Identification of mechanical properties of weld joints of AlMgSi07.F25 aluminium alloy. Metalurgija, 56, 1-2, 99–102 (2017). [Google Scholar]
  44. M. Dudziak, J. Mielniczuk Nieklasyczne modele materiałów w projektowaniu maszyn Radom, Wyd. Instytutu Technologii Eksploatacji (2001). [Google Scholar]
  45. D. Ondrusová, M. Pajtásová Rubber Components and their Influence on Rubber Properties and Environmental Aspects of Production - First Edition - Towarzystwo Słowaków w Polsce (2011). [Google Scholar]
  46. M. Kohutiar, M. Pajtásová, R. Janík, I. Papucová, J. Pagácová, B. Pecusová, I. Labaj Study of selected thermoplastics using dynamic mechanical analysis. MATEC Web of Conferences, 157, 1–9 (2018). [Google Scholar]
  47. B. Pecusová, M. Pajtásová, D. Ondrusová, A. Feriancová, M. Kohutiar, I. Labaj, Z. Micicová Study of clay minerals effect on curing characteristics of polymer blends and physical-mechanical properties of prepared vulcanizates. MATEC Web of Conferences, 157, 1–8 (2018). [Google Scholar]
  48. D. Czarnecka-Komorowska, K. Mencel Effect of [3-(2-aminoethyl) amino] propyl-heptaisobutyl-polysilsesquioxane nanoparticles on thermal stability and color of polyoxymethylene and polyamide 6. PrzemyslChemiczny 93, 11, 1997 (2014). [Google Scholar]
  49. D. Czarnecka-Komorowska, T. Sterzynski Effect of polyhedral oligomeric silsesquioxane on the melting, structure, and mechanical behavior of polyoxymethylene. Polymers, 10, 2 (2018). [Google Scholar]
  50. D. Czarnecka-Komorowska, K. Mencel Modification of polyamide 6 and polyoxymethylene with [3-(2-aminoethyl) amino] propyl-heptaisobutyl-polysilsesquioxane nanoparticles. Przemysł Chemiczny 93, 3, 392–396 (2014). [Google Scholar]
  51. M. Macko, K. Tyszczuk, G. Śmigielski, J. Flizikowski, A. Mroziński The use of CAD applications in the design of shredders for polymers. MATEC Web of Conferences, 157, 02027 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  52. J. Flizikowski, M. Macko Competitive design of shredder for plastic in recycling. Ed. By Horvath, I; Xirouchakis, P. Conference: 5th International Symposium on Tools and Methods of Competitive Engineering Lausanne, Switzerland Tools and methods of competitive engineering, 12, 1147–1148 (2014). [Google Scholar]
  53. M. Macko, A. Mroziński, J. Flizikowski Design and utility of specialist comminution set-up for plastics and organic materials. ASME International Mechanical Engineering Congress and Exposition IMECE, 3, 397–402 (2011). [Google Scholar]
  54. M. Macko, A. Mroziński, A. Prentki Simulations CAE of wood pellet machine. MATEC Web of Conferences, 254, 02028 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  55. M. Macko, K. Tyszczuk, G. Śmigielski Utility of an unitary-shredding method to evaluate the conditions and selection of constructional features during grinding, MATEC Web of Conferences, 157, 05016 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  56. M. Macko, A. Mroziński Work parameters research of wood pellet machine, AIP Conference Proceedings 2077, 020038 (2019). [CrossRef] [Google Scholar]
  57. M. Macko, A. Mroziński Computer Aided Design of Wood Pellet Machines. In: Rusiński, E., Pietrusiak, D. (eds) Proceedings of the 14th International Scientific Conference: Computer Aided Engineering. CAE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham (2019). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.