Open Access
Issue
MATEC Web Conf.
Volume 353, 2021
4th International Conference on Advances in Materials, Machinery, Electronics (AMME 2021)
Article Number 01017
Number of page(s) 4
DOI https://doi.org/10.1051/matecconf/202135301017
Published online 20 December 2021
  1. J. Davim: Machining of Titanium Alloys (Springer Heidelberg New York Dordrecht London, England 2014) [Google Scholar]
  2. M.L. Han, Y.M. Li and W. Zhao: Tool Engineering, Vol. 42 (2008) No.6, p.10. [Google Scholar]
  3. B. Zhou, L. Hou, R. Tang and Q. Zhang: Combined machine tool and automatic machining technology, (2015) No.7, p.10. [Google Scholar]
  4. A.J. Liu, Z.J. Zhou and B.L. Hu: Tool Engineering, (2017) No.12, p.40. [Google Scholar]
  5. Z.T. Hu, N. Qin and F. Liu: Machinery Design & Manufacture, (2018) No.2, p.164. [Google Scholar]
  6. Y.F. Gao, H. Chen and Y. Jiang: Journal of Nanchang University (Engineering Edition), Vol. 39 (2017) No.3, p.263. [Google Scholar]
  7. Y.S. Xu, P. Zou and W. Wang: Journal of Northeastern University (Natural Science Edition), Vol. 38 (2017) No.1, p.95. [Google Scholar]
  8. K. Venkatesan, R. Ramanujam and P. Kuppan: Procedia Engineering, Vol. 97 (2014) ,p.1637. [Google Scholar]
  9. M.A. Xavior and R. Vinayagamoorthy: Procedia Engineering, (2014) No.97, p.308. [Google Scholar]
  10. Z.X. He, Y.H. Hu, C.J. Yin: Journal of Chinese Agricultural Mechanization, Vol. 35 (2014) No.4, p.124. [Google Scholar]
  11. J.B. Sun, Y.H. Hu, L. He,: Machine Tool & Hydraulics, Vol. 44 (2016) No.5, p.68. [Google Scholar]
  12. V. Veeranaath: Materials Today: Proceedings, (2018) No.5, p.19547. [Google Scholar]
  13. X.M. Tian, J.G. Ren and J.H. Zhou: Tool Engineering, Vol. 46 (2012) No.10, p.37. [Google Scholar]
  14. J. Du, T.T. Zhou and J.J. Zhang, et al: Tool Engineering, (2018) No.5, p.51. [Google Scholar]
  15. S. Yan, M.J. Wang, X.K. Hu: Combined machine tool and automatic machining technology, (2014) No.10, p.135. [Google Scholar]
  16. X.J. He, G.D. Chen and T. Nelias: Mechanical Science and Technology for Aerospace Engineering, Vol. 30 (2011) No.12, p.2116. [Google Scholar]
  17. Y.C. Zhang, T. Mabrouki and D. Shen, et al: International Journal of Material Forming, Vol. 4: (2011) No.1, p.11. [Google Scholar]
  18. H.F. Wang, T. Xiao and W.G. Wu: Machinery Design & Manufacture, (2012) No.09, p.48. [Google Scholar]
  19. Z.X. Qu, and L.F.Zhang:NC [J]. Tool technology, Vol. 43: (2009) No.4, p.51-56. [Google Scholar]
  20. D. Ulutan, I. Lazoglu and C. Dinc: Journal of Materials Processing Technology, Vol. 209 (2009) No.2, p.1111. [Google Scholar]
  21. S.J.Yan, D.H.Zhu and K.J.Zhuang: Journal of Materials Processing Technology, Vol. 214: (2014) No.12, p.2985. [Google Scholar]
  22. H.C. Möhring, C. Kushner and M. Storchak:CIRP Annals, Vol. 67: (2018) No.1, p.61. [Google Scholar]
  23. C.W. Shan, X. Zhang and B. Shen, et al: Chinese Journal of Aeronautics, Vol. 32: (2019), p.759. [Google Scholar]
  24. G.M. Dayan, R.H. Kishore, V. Praveen: Materials Today: Proceedings, Vol. 18: (2019), p.2191. [Google Scholar]
  25. S. Pervaiz, I. Deiab and E.M. Wahba, et al: Procedia CIRP, Vol. (2014) No.17, p.750. [Google Scholar]
  26. S Imbrogno, S Sartori, A Bordin, et al: Procedia CIRP, Vol. (2017) No.58, p. 475. [Google Scholar]
  27. R. Kataoka and E. Shamoto: Precision Engineering, VoL. 55 (2019), p.322 [Google Scholar]
  28. S. Zongtao, S. Fei and M. Wei: International Journal of Mechanical Sciences, (2018) No.148, p.510 [Google Scholar]
  29. S.J. Yan, B.C. Xu and Q. Xin, et al: Manufacturing Technology & Machine Tool, (2018) No.8, p.129 [Google Scholar]
  30. P.P. Zhou, J.Q. Li and L.F. Xu, et al: Tool Engineering, VoL. 50 (2016) No.5, p.21 [Google Scholar]
  31. Z.J. Zhu, J. Sun and J.F. Li, et al: The International Journal of Advanced Manufacturing Technology, VoL. 83 (2016) No.9-12, p.1477 [Google Scholar]
  32. V.A.D. Silva, R. Pederiva and H.K. Neto, et al: The International Journal of Advanced Manufacturing Technology, (2018) No.94, p.2115 [Google Scholar]
  33. S. Patil, S. Joshi and A. Tewari, et al: Ultrasonics, VoL. 54 (2013) No.2, p.694 [Google Scholar]
  34. Z.G. Wang, S. Nakashima, M. Larson: Procedia CIRP, (2014) No.17, p.523. [Google Scholar]
  35. F. A.M. Vogel, S. Berger, E. Ozkaya, et al: Procedia Manufacturing, (2019) No.40, p.32. [Google Scholar]
  36. N. Suzuki, W. Takahashi, H. Igeta, et al: CIRP Annals, VoL. 69 (2020), p.93. [Google Scholar]
  37. C.M. Rao, S.S. Rao and M.A. Herbert: Journal of Manufacturing Processes, VoL. 36 (2018), p.93. [Google Scholar]
  38. P.X. Zheng and X.H. Long: Theoretical and Applied Mechanics Letters, VoL. 3 (2013) No.6, p.e063003. [Google Scholar]
  39. S. Kim and K. Ahmadi: Mechanical Systems and Signal Processing, VoL.130 (2019), p.315. [Google Scholar]
  40. S. Martín-Béjar, F. Trujillo, C. Bermudo, et al: Procedia Manufacturing, VoL.41 (2019), p.835. [Google Scholar]
  41. Y. Chen, R.L. Sun, Y. Gao, et al: Measurement, VoL.98 (2017), p.25. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.