Open Access
Issue
MATEC Web Conf.
Volume 353, 2021
4th International Conference on Advances in Materials, Machinery, Electronics (AMME 2021)
Article Number 01010
Number of page(s) 8
DOI https://doi.org/10.1051/matecconf/202135301010
Published online 20 December 2021
  1. Ouyang Zhengrong, Zhai Zhenglong, Zhu Jingjun. A brief analysis of the development status and technical points of spring steel[J]. Laigang Science & Technology, 2013, (6):7-10. [Google Scholar]
  2. Ouyang W Z. Equivalent circuit for EIS study on rusted marine cast iron artifacts [J]. Advance Materials Research, 2015, 1094: 316-319. [Google Scholar]
  3. West W C, Hood Z D, Adhikari S P, et al. Reduction of charge-transfer resistance at the solid electrolyte -electrode interface by pulsed laser deposition of films from a crystalline Li2PO2N source [J]. Journal of Power Sources, 2016, 312: 116-122. [Google Scholar]
  4. Liu Shuan, Zhao Xia, Chen Changwei. Corrosion Behavior of Pipeline Steel X65 in Oilfield[J]. Journal of Chinese Society for Corrosion and Protection, 2015,35(5):393–399. [Google Scholar]
  5. Yin Z F, Zhao W Z, Lai W Y, et al. Electrochemical behaviour of Ni-base alloys exposed under oil/gas field environments [J]. Corrosion Science, 2009, 51(8): 1702–1706. [Google Scholar]
  6. Xu Dexian, Yin Zhongda. High Strengthening Spring Steel and Effect of Alloying Elements [J]. Heat Treatment of Meatails, 2003, 28 (12): 30-36. [Google Scholar]
  7. Yu Fuzhou. Corrosion resistance of Metal Materials [M]. Bei Jing:Science Press,1982. [Google Scholar]
  8. Xing Xianqiang. Present situation of low-alloy spring steel wire rod for domestic automobile [J]. Metal Products, 2010, (6):34-37. [Google Scholar]
  9. Luo Xiong, Lin zhenyuan. The development of high strength corrosion resistant alloy material in the lightweight design of car suspension spring[C]. Wu Xi: Proceedings of the 23rd annual meeting of national metal products information network, 2013. [Google Scholar]
  10. Huang Jianzhong, Zuo Yu. Corrosion resistance and corrosion data of materials [M]. Bei Jing:Chemical industry press, 2003, 81-84. [Google Scholar]
  11. Hu Lihua, Lu MinXu, Chang Wei. Effect of Cr Content and Microstructures on the CO2 Corrosion Resistance of the Weld Joint of 1%Cr Containing Pipeline Steel [J]. Journal of Materials Engineering, 2010, (7): 82-86. [Google Scholar]
  12. Wang J Q, Atrens A. SCC initiation for X65 pipeline steel in the “high” pH carbonate/ bicarbonate solution [J]. Corrosion Science, 2003, 45(10): 2199–2217. [Google Scholar]
  13. Li J, Elboujdaini M, Fang B. Microscopy study intergranular stress corrosion cracking of X-52 line pipe steel [J]. Corrosion, 2006, 62(4): 316–322. [Google Scholar]
  14. Chen W, King F, Vokes E. Characteristics of near-neutral-pH stress corrosion cracks in an X-65 pipeline [J]. Corrosion, 2002, 58(3): 267–275. [Google Scholar]
  15. Guo Hao, Li Guangfu, Cai Xun. Stress Corrosion Cracking Behavior of X70 Pipeline Steel in Near-Neutral Ph Solutions at Different Temperatures [J]. ACTA METALLURGICA Sinice, 2004, 40(9): 967–971. [Google Scholar]
  16. Dmytrakh I M. Corrosion fracture of structural metallic materials: effect of electrochemical conditions in crack [J]. Strain, 2011, 47(s2): 427-435 [Google Scholar]
  17. Tang X, Cheng Y F. Quantitative characterization by micro-electrochemical measurements of the synergism of hydrogen,stress and dissolution on near-neutral pH stress corrosion cracking of pipelines [J]. Corrosion Science, 2011, 53(9): 2927–2933. [Google Scholar]
  18. Hui W J, Dong H, Weng Y Q, et al. Delayed fracture behavior of CrMo type high strength steel containing titanium [J]. Journal of Iron and Steel Research Inter, 2005, 12(1):43–49. [Google Scholar]
  19. Xian Aiping, Li Peiji, Li Xun. Trapping of Hydrogen by Precipitate TiC in Low Carbon Steel[J]. ACTA METALLURGICA Sinice, 1986, 22(3): A181-187. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.