Open Access
Issue
MATEC Web Conf.
Volume 353, 2021
4th International Conference on Advances in Materials, Machinery, Electronics (AMME 2021)
Article Number 01004
Number of page(s) 5
DOI https://doi.org/10.1051/matecconf/202135301004
Published online 20 December 2021
  1. Zhigang Lei. Preparation and application of fluorine-containing demoulding agent[D]. Zhejiang University of Technology,2009. [Google Scholar]
  2. Amra, Kesrin, Momin, etc. Formulation evaluation of ketoconazole microemulsion-loaded hydrogel with nigella oil as a penetration enhancer[J]. Journal of Cosmetic Dermatology, 2019, 18(6): 1742–1750. [Google Scholar]
  3. Benito J. M., Cambiella A., Lobo A., etc. Formulation, characterization and treatment of metalworking oil-in-water emulsions[J]. Clean Technologies and Environmental Policy, 2010, 12(1): 31–41. [Google Scholar]
  4. Beshkar Farshad, Khojasteh Hossein, Salavati-Niasari Masoud. Recyclable magnetic superhydrophobic straw soot sponge for highly efficient oil/water separation[J]. Journal of Colloid and Interface Science, 2017, 497(56): 57–65. [Google Scholar]
  5. Cambiella Angel, Benito Jose A., Pazos Carmen, etc. Interfacial properties of oil-in-water emulsions designed to be used as metalworking fluids[J]. Colloids and Surfaces a-Physicochemical and Engineering Aspects, 2007, 305(1-3): 112-119. [Google Scholar]
  6. Cambiella A., Benito J. M., Pazos C., etc. The effect of emulsifier concentration on the lubricating properties of oil-in-water emulsions[J]. Tribology Letters, 2006, 22(1): 53–65. [Google Scholar]
  7. Cappelletti G., Ardizzone S., Meroni D., etc. Wettability of bare and fluorinated silanes: A combined approach based on surface free energy evaluations and dipole moment calculations[J]. Journal of Colloid and Interface Science, 2013, 389(557): 284–291. [Google Scholar]
  8. Carvalho De Almeida C., De Araujo Melo D. M., Maciel M. A. M., etc. Use of methanolic extract of ixora coccinea linn for corrosion inhibitor, which comprises preparation, characterization and application of microemulsion system based on extract as corrosion inhibitor, containing oil phase and aqueous phase. Maciel M a M: 英国. [Google Scholar]
  9. Cerpnjak Katja, Zvonar Alenka, Vrecer Franc, etc. Development of a solid self-microemulsifying drug delivery system (smedds) for solubility enhancement of naproxen[J]. Drug Development and Industrial Pharmacy, 2015, 41(9): 1548–1557. [Google Scholar]
  10. Chaydarreh Kamran Choupani, Shalbafan Ali, Welling Johannes. Effect of ingredient ratios of rigid polyurethane foam on foam core panels properties[J]. Journal of Applied Polymer Science, 2017, 134(17): 224–675. [Google Scholar]
  11. Chouhan P., Saini T. R. D-optimal design and development of microemulsion based transungual drug delivery formulation of ciclopirox olamine for treatment of onychomycosis[J]. Indian Journal of Pharmaceutical Sciences, 2016, 78(4): 498–511. [Google Scholar]
  12. deDamborenea J., Bastidas J. M., Vazquez A. J. Adsorption and inhibitive properties of four primary aliphatic amines on mild steel in 2m hydrochloric acid[J]. Electrochimica Acta, 1997, 42(3): 455–459. [Google Scholar]
  13. Erdal M. Sedef, Ozhan Gul, Mat M. Cem, etc. Colloidal nanocarriers for the enhanced cutaneous delivery of naftifine: Characterization studies and in vitro and in vivo evaluations[J]. International Journal of Nanomedicine, 2016, 11(6): 1027–1037. [Google Scholar]
  14. Figueiredo Leandro, Bandeira Pedro, Mendes Adelio, etc. Use of fluoropolymer permanent release coatings for molded polyurethane foam production[J]. Journal of Coatings Technology and Research, 2012, 9(6): 757–764. [Google Scholar]
  15. Fu Yanhui, Li Zhijun, Liu Qinqin, etc. Construction of carbon nitride and mos2 quantum dot 2d/0d hybrid photocatalyst: Direct z-scheme mechanism for improved photocatalytic activity[J]. Chinese Journal of Catalysis, 2017, 38(12): 2160–2170. [Google Scholar]
  16. Sirtl Erhard, Über die reduktion von chlorsilanen mit wasserstoff[J]. Reuschel, 2004, 332(3‐4): 113-123. [Google Scholar]
  17. Fu Yanhui, Liang Wei, Guo Jinqiu, etc. Mos2 quantum dots decorated g-c3n4/ag heterostructures for enhanced visible light photocatalytic activity[J]. Applied Surface Science, 2018, 430(3): 234–242. [Google Scholar]
  18. Kabakci Elif, Sayer Goksin, Suvaci Ender, etc. Processing-structure-property relationship in rigid polyurethane foams[J]. Journal of Applied Polymer Science, 2017, 134(21): 354–554. [Google Scholar]
  19. Kim S. H., Park H. C., Jeong H. M., etc. Glass fiber reinforced rigid polyurethane foams[J]. Journal of Materials Science, 2010, 45(10): 2675–2680. [Google Scholar]
  20. Kumar Neeraj Shishu. D-optimal experimental approach for designing topical microemulsion of itraconazole: Characterization and evaluation of antifungal efficacy against a standardized tinea pedis infection model in wistar rats[J]. European Journal of Pharmaceutical Sciences, 2015, 67(7): 97–112. [Google Scholar]
  21. Li Caifu, Mei Zhen, Liu Qian, etc. Formation and properties of paraffin wax submicron emulsions prepared by the emulsion inversion point method[J]. Colloids and Surfaces a-Physicochemical and Engineering Aspects, 2010, 356(1-3): 71-77. [Google Scholar]
  22. Li Guo, Dong Lei, Bai Zhu’an, etc. Predicting carbonation depth for concrete with organic film coatings combined with ageing effects[J]. Construction and Building Materials, 2017, 142(6): 59–65. [Google Scholar]
  23. Kim Kwang J., Shahinpoor Mohsen A novel method of manufacturing three-dimensional ionic polymer–metal composites (ipmcs) biomimetic sensors, actuators and artificial musclesj[J]. Polymer, 2015, 43(3): 797–802. [Google Scholar]
  24. Masuda Jun, Yan Jiwang, Zhou Tianfeng, etc. Thermally induced atomic diffusion at the interface between release agent coating and mould substrate in a glass moulding press[J]. Journal of Physics D-Applied Physics, 2011, 44(21): 345–677. [Google Scholar]
  25. Haowei Zhao. Preparation of self-emulsifying block silicone oil[J]. New Chemical Materials, 2019, 2(1): 1–4. [Google Scholar]
  26. Otsuka Yuma, Hiwasa Shin, Taniguchi Jun. Development of release agent-free replica mould material for ultraviolet nanoimprinting[J]. Microelectronic Engineering, 2014, 123(53): 192–196. [Google Scholar]
  27. Peres Francois, Mofakhami Arthur Rapid tooling from protoypes: The cool-spray mold-making method[J]. Proceedings of SPIE -The International Society for Optical Engineering, 1998, 3517(11): 79–90. [Google Scholar]
  28. Scaffaro R., Maio A., Gulino F. E., etc. Bilayer biodegradable films prepared by co-extrusion film blowing: Mechanical performance, release kinetics of an antimicrobial agent and hydrolytic degradation[J]. Composites Part a-Applied Science and Manufacturing, 2020, 132(76): 453–658. [Google Scholar]
  29. Serre C., Vayer M., Erre R. Behavior of internal mold release agent during bmc thermosets composites cure and aging[J]. Journal of Materials Science Letters, 2001, 20(21): 1989–1991. [Google Scholar]
  30. Lotierzo A., Pifferi V., Ardizzone S., etc. Insight into the role of amines in metal working fluids[J]. Corrosion Science, 2016, 110(3): 192–199. [Google Scholar]
  31. Migahed M. A., Abd-El-Raouf M., Al-Sabagh A. M., etc. Corrosion inhibition of carbon steel in acid chloride solution using ethoxylated fatty alkyl amine surfactants[J]. Journal of Applied Electrochemistry, 2006, 36(4): 395–402. [Google Scholar]
  32. Miyata Takahiro, Matsumoto Kozo, Endo Takeshi, etc. Synthesis and radical polymerization of styrene-based monomer having a five-membered cyclic carbonate structure[J]. Journal of Polymer Science Part a-Polymer Chemistry, 2012, 50(15): 3046–3051. [Google Scholar]
  33. Negi Ripudaman Singh, Bisht Rajendra Singh, Singh Raj K. Physico-mechanical and antibacterial properties of pine gum/epoxy composites with/without silver nanoparticles[J]. Macromolecular Materials and Engineering, 2019, 304(7): 335–577. [Google Scholar]
  34. Neis Franciele Antonia, de Costa Fernanda, Fuller Thanise Nogueira, etc. Biomass yield of resin in adult pinus elliottii engelm. Trees is differentially regulated by environmental factors and biochemical effectors[J]. Industrial Crops and Products, 2018, 118(3): 20–25. [Google Scholar]
  35. Padula C., Telo I., Di Ianni A., etc. Microemulsion containing triamcinolone acetonide for buccal administration[J]. European Journal of Pharmaceutical Sciences, 2018, 115(2): 233–239. [Google Scholar]
  36. Pal Kaushik, Rajasekar R., Kang Dong Jin, etc. Effect of fillers on natural rubber/high styrene rubber blends with nano silica: Morphology and wear[J]. Materials & Design, 2010, 31(2): 677–686. [Google Scholar]
  37. Guanghui Yuan. Study on preparation process of organic silicon release agent[D]. Qingdao University of Science and Technology, 2013. [Google Scholar]
  38. Mingming Xu. Synthesis and application of functional organosilicon compounds[D]. Tianjin Polytechnic University, 2017. [Google Scholar]
  39. Chengyong Jiang. Silicone release agent and its application[J]. Plastics Industry, 2008, (02): 74-75. [Google Scholar]
  40. Runlin Li. Development and characteristics of water -based semi-permanent release agent[J]. Rubber Reference, 1992, (05): 22-28. [Google Scholar]
  41. Bin Li. Study of room temperature curing semi-permanent release agent[D]. Dalian Polytechnic University, 2015. [Google Scholar]
  42. Hongsheng Guo. Development and characteristics of water -based semi-permanent release agent[J]. Rubber translations, 1993, (03): 19-24+3. [Google Scholar]
  43. Liying Wu, jianjun Gao, Wugang Jin. The release agent of composites metalized by transfer[J]. Colloids and Polymers, 2001, (04): 21-22. [Google Scholar]
  44. Bin Li, Hongyi Hai, Jianlou Ge, etc. Preparation and performance of semi-permanent release agent cured at room temperature[J]. Journal of Dalian Polytechnic University, 2015, 34(05): 345–348. [Google Scholar]
  45. Haibin Zhou. Use semi-permanent release agent to help release mold and prevent mold contamination[J]. World rubber Industry, 2007, (01): 33-36. [Google Scholar]
  46. Xuezhong Tu. Semi-permanent release agent for precision model products[J]. Rubber Industry, 1996, (03): 184. [Google Scholar]
  47. Yangyang Fan, Bin Lin, Chen Zhang, etc. Preparation property of semi permanent mold release agent at room temperature[J]. New chemical materials, 2018, 46(03): 200–202+206. [Google Scholar]
  48. Chen Zhang, Bin Li, Yanjun Liu. Preparation of semi-permanent release agent cured at room temperature[J]. Technology Outlook, 2017, (4): 38. [Google Scholar]
  49. Zhiming Li, Wentao Xing, Jianyan Xu, etc. Preparation method and application of a release agent. 2010. [Google Scholar]
  50. Hang Zhu, Xinliang Peng. A water-based semi-permanent organic fluorine release agent. 2019. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.