Open Access
Issue
MATEC Web Conf.
Volume 351, 2021
20th International Conference Diagnostics of Machines and Vehicles “Hybrid Multimedia Mobile Stage”
Article Number 01006
Number of page(s) 8
Section Selected Diagnostic Problems of Hybrid Multimedia Mobile Stages
DOI https://doi.org/10.1051/matecconf/202135101006
Published online 06 December 2021
  1. A. Dykha, S. Matyukh, T. Kałaczyński, Diagnostics Experimental Analysis of Friction Pairs at Stick Slip Sliding. Matec Web of Conferences, 302, 1-8 (2019) [Google Scholar]
  2. I. M. Hutchings, Tribology. Friction and wear of engineering materials, (Elsevier, Cambridge, 1992) [Google Scholar]
  3. T. Kałaczyński, R.M. Martinod, State of mechanical condition applied to industrial machines based on SVD method. Ingeniare. Revista chilena de ingenieria, 26, 264-272 (2018) [Google Scholar]
  4. J. Krawczyk, Tribological properties of selected structural steels (Właściwości tribologiczne wybranych stali konstrukcyjnych). Tribologia, 4, 223-233 (2010) [Google Scholar]
  5. M. Liss, T. Kałaczyński, N. Dluhunovych, A. Dykha, R.M. Martinod, Identification of loads of the construction of a Hybrid Multimedia Mobile Stage. Matec Web of Conferences, 332, 1-9 (2021) [Google Scholar]
  6. M. Madej, D. Ozimina, K. Kurzydłowski, T. Płociński, P. Wieciński, M. StypRekowski, M. Matuszewski, Properties of diamond-like carbon coatings deposited on CoCrMo alloys. Transactions of Famena, 39, 79-88 (2015) [Google Scholar]
  7. V. Martynyuk, O. Eromenko, J. Boiko, T. Kałaczyński, Diagnostics of supercapacitors. Matec Web of Conferences, 182, 1-10 (2018) [Google Scholar]
  8. M. Styp-Rekowski, E. Mańka, M. Matuszewski, M. Madej, D. Ozimina, Tribological problems in shaft hoist ropes wear process. Industrial Lubrication and Tribology, 67, 1, 47-51 (2015) [Google Scholar]
  9. T. Burakowski, The importance of surface engineering in tribology (Znaczenie inżynierii powierzchni w tribologii). Tribologia, 4, 1097-1111 (2002) [Google Scholar]
  10. J. H. Horng, J. F. Lin, K. Y. Li, Effect of surface roughness on stell roller scuffing. Wear, 184, 203-212 (1995) [Google Scholar]
  11. W. Lubimow, K. E. Oczoś, Selected issues of shaping surface irregularities in machining processes (Wybrane zagadnienia kształtowania nierówności powierzchni w procesach obróbkowych). Mechanik, 3, 81-84 (1997) [Google Scholar]
  12. J. Raja, Field testing of machine tool diagnostic techniques using surface metrology. Annals of CIRP, 32, 503-506 (1983) [Google Scholar]
  13. D. J. Whitehouse, Process and quality control using surface finish. Proceedings 6th Symposium IMEKO Metrology for quality control in production, Vienna, 699-710 (1998) [Google Scholar]
  14. T. Burakowski, T. Wierzchoń, Metal surface engineering (Inżynieria powierzchni metali), (Publ. WNT, Warszawa, 1995) [Google Scholar]
  15. E. Mańka, M. Styp-Rekowski, M. Matuszewski, D. Y. Pimenov, Shaft hoist rope wear condition as a diagnostics signal. Matec Web of Conferences, 332, 1-10 (2021) [Google Scholar]
  16. G. W. Stachowiak, A. W. Batchelor, Engineering tribology, (Butterworth-Heinemann, Great Britain, 2001) [Google Scholar]
  17. R. Górecka, Z. Polański, Metrology of the surface layer (Metrologia warstwy wierzchniej), (Publ. WNT, Warszawa 1983) [Google Scholar]
  18. K. E. Oczoś, W. Lubimow, Surface geometric structure (Struktura geometryczna powierzchni), (Publ. Rzeszow University of Technology, Rzeszów, 2003) [Google Scholar]
  19. P. Pawlus, Surface topography: measurement, analysis, impact (Topografia powierzchni: pomiar, analiza, oddziaływanie), (Publ. Rzeszow University of Technology, Rzeszów, 2006) [Google Scholar]
  20. B. Nowicki B., Geometric structure: surface roughness and waviness (Struktura geometryczna: chropowatość i falistość powierzchni), (Publ. WNT, Warszawa, 1991) [Google Scholar]
  21. B. G. Rosen, R. Ohlsson, J. Westberg, 1995. Interactive surface modelling, an implementation of an expert system for specification of surface roughness and topography. International Journal of Machine Tools and Manufacture, 35, 317-324 (1995) [Google Scholar]
  22. K. E. Oczoś, W. Lubimow, Determinism and randomness of surface geometric structures (Determinowość i losowość struktur geometrycznych powierzchni (SGP)). Pomiary Automatyka Kontrolna, 10, 2002, 4-6 (2002) [Google Scholar]
  23. M. Wieczorowski, A. Cellary, J. Chajda, A guide to measuring surface roughness, or roughness and more (Przewodnik po pomiarach nierówności powierzchni czyli o chropowatości i nie tylko). (Publ. Poznan University of Technology, Poznań, 2003) [Google Scholar]
  24. M. Matuszewski, M. Słomion, A. Mazurkiewicz, D.Y. Pimenov, Assessment of friction pair elements condition based on changes in the geometric surface structure isotropicity degree. Matec Web of Conferences, 302, 1-8 (2019) [Google Scholar]
  25. J. Williams, Engineering tribology, (Cambridge University Press, Cambridge, 2005) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.