MATEC Web Conf.
Volume 182, 201817th International Conference Diagnostics of Machines and Vehicles
|Number of page(s)||9|
|Section||Methodology and Vibroacoustics|
|Published online||30 July 2018|
Application of surface frequency functions to assess the state of the kinematic pair elements
University of Science and Technology in Bydgoszcz, Faculty of Mechanical Engineering, 85-796 Bydgoszcz, Poland
2 University of Burgos, Department of Civil Engineering, Avda Cantabria s/n, Burgos 09006, Spain
* Corresponding author : firstname.lastname@example.org
In this paper the possibility of using frequency functions of the kinematic pair surface layer elements was analyzed for evaluation of the surface layer condition. The function of spectral power density and autocorrelation which were accepted for analysis was characterized. Evaluation of the elements condition was made on the quantify way as changes in degree of isotropy and in the qualitative way based on the graphs of the analyzed frequency functions. After tribological tests the surface structures were adopted to assess the changes. Spectral graphs for structures without cooperation (directly after-machining) and for the different friction distance, were analyzed. Conditions during tribological tests were taken as permanent. The determined degree of isotropy basis on the frequency functions and received graphs of spectra power density function and autocorrelation become useful in evaluation of the surface layer changes during its transformation.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.