EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 348 (2021) MATEC Web Conf., 348 (2021) 01010 References
Open Access
Issue
MATEC Web Conf.
Volume 348, 2021
The 2nd International Network of Biomaterials and Engineering Science (INBES’2021)
Article Number 01010
Number of page(s) 6
DOI https://doi.org/10.1051/matecconf/202134801010
Published online 17 November 2021
  1. S. Golru, M. Sharifi, M. B. Attar, and B. Ramezanzadeh. “Effects of surface treatment of aluminium alloy 1050 on the adhesion and anticorrosion properties of the epoxy coating.” Applied Surface Science 345 (2015): 360–368. [Google Scholar]
  2. T. Borvik, M. Langseth, O.S. Hoperstad and K.A. Malo. “Ballistic penetration of steel plates. International journal of impact engineering”, 22(9-10). (1999), 855–886. [Google Scholar]
  3. A. Rusinek, J.A. Rodriguez-Martinez, R. Zaera, J.R. Klepaczko, A. Arias, & C. Sauvelet. “Experimental and numerical study on the perforation process of mild steel sheets subjected to perpendicular impact by hemispherical projectiles.” International Journal of Impact Engineering 36.4 (2009): 565–587. [CrossRef] [Google Scholar]
  4. Nia, A. Alavi, G.R. Hoseini. “Experimental study of perforation of multi-layered targets by hemispherical-nosed projectiles.” Materials & Design 32.2 (2011): 1057–1065. [Google Scholar]
  5. A.G. Atkins, J.H. Liu. “Necking and radial cracking around perforations in thin sheets at normal incidence.” International journal of impact engineering 21.7 (1998): 521–539. [CrossRef] [Google Scholar]
  6. T. Borvik, M. Langseth, O.S. Hoperstad and K.A. Malo, “Perforation of 12 mm thick steel plates by 20 mm diameter projectiles with flat, hemispherical and conical noses part I: experimental study”. International journal of Impact Engineering, 27, 19–35, 2002. [CrossRef] [Google Scholar]
  7. K.M. Kpenyigba, T. Jankowiak, A. Rusinek, R. Pesci. “Influence of projectile shape on dynamic behavior of steel sheet subjected to impact and perforation.” Thin-Walled Structures 65 (2013): 93–104. [CrossRef] [Google Scholar]
  8. A. Rusinek, J.A. Rodriguez-Martinez, A. Arias, J.R. Klepaczko, J. Lopez-Puente. “Influence of conical projectile diameter on perpendicular impact of thin steel plate.” Engineering Fracture Mechanics 75.10 (2008): 2946–2967. [CrossRef] [Google Scholar]
  9. M.E. Backman, W. Goldsmith, “The mechanics of penetration of projectiles into targets”, International Journal of Engineering Science, 16, 1, 1–99, 1987. [Google Scholar]
  10. R. Johnson, R. Gordon, H. Cook. William. “Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures.” Engineering fracture mechanics 21.1 (1985): 31–48. [CrossRef] [Google Scholar]
  11. A. Bendarma, H. Gourgue, H.T. Jankowiak, T.A. Rusinek, A.S. Kardellass, & M. Klosak. “Perforation tests of composite structure specimens at wide range of temperatures and strain rates-experimental analysis”. Materials Today: Proceedings. (2019). [Google Scholar]
  12. Bendarma, A., Rusinek, A., Jankowiak, T., Lodygowski, T., & Jia, B. (2021). “Experimental analysis of the aluminum alloy sheet subjected to impact and perforation process”. Materials Today: Proceedings, 36, 88–93. [CrossRef] [Google Scholar]
  13. A. Bendarma, T. Jankowiak, A. Rusinek, T. Lodygowski, M. Klosak. “Perforation Tests of Aluminum Alloy Specimens for a Wide Range of Temperatures Using High-Performance Thermal Chamber-Experimental and Numerical Analysis.” IOP Conference Series: Materials Science and Engineering. Vol. 491. No. 1. IOP Publishing, 2019. [Google Scholar]
  14. Bendarma, A., Jankowiak, T., Rusinek, A., Lodygowski, T., Jia, B., Miguelez, M. H., & Klosak, M. (2020). “Dynamic Behavior of Aluminum Alloy Aw 5005 Undergoing Interfacial Friction and Specimen Configuration in Split Hopkinson Pressure Bar System at High Strain Rates and Temperatures”. Materials, 13(20), 4614. [CrossRef] [Google Scholar]
  15. M. Klosak, A. Rusinek, A. Bendarma. “Experimental study of brass properties through perforation tests using a thermal chamber for elevated temperatures.” Latin American Journal of Solids and Structures 15.10 (2018). [Google Scholar]
  16. A. Bendarma, T. Jankowiak, A. Rusinek, T. Lodygowski, M. Klosak. “Experimental and numerical analysis of the aluminum alloy AW5005 behavior subjected to tension and perforation under dynamic loading.” Journal of Theoretical and Applied Mechanics 55.4 (2017): 1219–1233. [CrossRef] [Google Scholar]
  17. T. Jankowiak, A. Rusinek, K.M. Kpenyigba, R. Pesci. “Ballistic behavior of steel sheet subjected to impact and perforation.” Steel and Composite Structures 16.6 (2013): 595–609. [Google Scholar]
  18. Recht, RoF, and T.W. Ipson. “Ballistic perforation dynamics.” Journal of Applied Mechanics 30.3 (1963): 384–390. [CrossRef] [Google Scholar]
  19. Jia, B., Rusinek, A., Pesci, R., Bernier, R., Bahi, S., Bendarma, A., & Wood, P. (2021). “Simple shear behavior and constitutive modeling of 304 stainless steel over a wide range of strain rates and temperatures”. International Journal of Impact Engineering, 154, 103896. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.