Open Access
| Issue |
MATEC Web Conf.
Volume 348, 2021
The 2nd International Network of Biomaterials and Engineering Science (INBES’2021)
|
|
|---|---|---|
| Article Number | 01008 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/matecconf/202134801008 | |
| Published online | 17 November 2021 | |
- A. Elmoumen, “Prediction of heterogeneous material behavior based on numerical homogenization: modeling, visualization and morphological study”, (2014) [Google Scholar]
- T. Kanit , S. Forest, I. Galliet, V. Mounoury, D. Jeulin, Determination of the size of the representative volume element for random composites: Statistical and numerical approach” International Journal of Solids and Structures, (2003) [Google Scholar]
- H. Essabir, “Bio-composites based on argan nutshell: Implementation, characterization and modeling of mechanical behavior”, (2015) [Google Scholar]
- F. EL Houdaigui, S. Forest, A. Gourgues, D. Jeulin, On the size of the representative volume element for isotropic elastic polycrystalline copper. IUTAM, (2007) [Google Scholar]
- S. Lejeunes and S. Bourgeois. An abaqus toolbox for computing effective properties of heterogeneous media. In 10e colloque national en calcul des structures, (2011) [Google Scholar]
- V.-H. Nhu. Numerical dialogues between tribological scales. PhD thesis, (2013) [Google Scholar]
- T. Kanit, S. Forest, I. Galliet, V. Mounoury, D. Jeulin, Determination of the size of the representative vomlume element for random composites: Statistical and numerical approach. Int. J. Solids Struct. 40, 3647–3679, (2003) [CrossRef] [Google Scholar]
- Kanit, T., N'Guyen, F., Forest, S., Jeulin, D., Reed, M., Singleton, S., Apparent and effective physical properties of heterogeneous materials: Representativity of samples of two materials from food industry. Comput. Meth. Appl. Mech. Engng. 195, 3960–3982, (2006) [CrossRef] [Google Scholar]
- M.H. Houben, M.H. Guillaud, “Traité de construction en terre”, CRATerre [Google Scholar]
- R. Christensen [et al.], Solutions for effective shear properties in three phase sphere and cylinder models. J. Mech. Phys. Solids 27, 315–330. 33, 75, 175, (1979) [CrossRef] [Google Scholar]
- M. Jiang, I. Jasiuk and M. Ostoja-Strazewski, Apparent thermal conductivity of periodic two-dimensional composites, Computational Materials Science- 3: Vol. 25. -pp. 329–338, (2002) [CrossRef] [Google Scholar]
- M.A.A. Cavalcante, H. Khatam and M.J. Pindera, Homogenization of elastic-plastic periodic materials by FVDAM and FEM approaches - An assessment, Composites Part B- 6: Vol. 42. - pp. 1713–1730, (2011) [Google Scholar]
- G. Chen [et al.] On the statistical determination of strength of random heterogeneous materials, Composite Structures - Vol. 149. - pp. 220–230, (2016) [CrossRef] [Google Scholar]
- T. Leidi [et al.] Computing effective properties of random heterogeneous materials on heterogeneous parallel processors, Computer Physics Communications- 11: Vol. 183. - pp. 2424–2344, (2012) [CrossRef] [Google Scholar]
- L. Bouaoune [et al.] Random versus periodic microstructures for elasticity of fiber reinforced composites [Article] // Composites Part B - Vol. 103. - pp. 68–73, (2016) [CrossRef] [Google Scholar]
- A. El Moumen, “Effect of the interconnection of inclusions on the effective properties of a heterogeneous material”, 21st French Congress of Mechanics, (2013) [Google Scholar]
- Bledzki, A. K., Gassan, J., Composites reinforced with cellulose based fibers. Prog. Polym. Sci 24, 221–274, (1999) [CrossRef] [Google Scholar]
- O. Faruk [et al.], Biocomposites reinforced with natural fibers: 2000-2010. Prog. Polym. Sci 37, 1552–1596, (2012) [CrossRef] [Google Scholar]
- S. Mir [et al.], Improvement of physico-mechanical properties of coir-polypropylene bio composites by fiber chemical treatment. Materials and design 52, 251–257, (2013) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.