Open Access
| Issue |
MATEC Web Conf.
Volume 347, 2021
12th South African Conference on Computational and Applied Mechanics (SACAM2020)
|
|
|---|---|---|
| Article Number | 00037 | |
| Number of page(s) | 12 | |
| DOI | https://doi.org/10.1051/matecconf/202134700037 | |
| Published online | 23 November 2021 | |
- T. Ozel, D. Ulutan, Predication of machining-induced residual stresses in turning of titanium and nickel based alloys with experiments and finite element simulations, CIRP Annals, 61, Issue 1, 547-550 (2012) [CrossRef] [Google Scholar]
- J. Outeiro, K. Ee, O. Dillon, P. Wanigarathne, I. Jawahir, Some Observations on Comparing the Modelled and Measured Residual Stresses on the Machined Surface Induced by Orthogonal Cutting of AISI 316L Steel, Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations, 11–12 May, Bled, Slovenia, 475-481 (2006) [Google Scholar]
- G. Styger, R.F. Laubscher, G. Oosthuizen, Effect of Constitutive Modeling During Finite Element Analysis of Machining-induced Residual Stresses in Ti6Al4 V. Procedia CIRP. 13, 292-431 (2014) [Google Scholar]
- J. Sosa, D. Huber, B. Welk, H. Fraser, Development and application of MIPAR™: a novel software package for twoand three-dimensional microstructural characterization, Integrating Materials, 3, 123-140 (2014) [CrossRef] [Google Scholar]
- L. Čerče, F. Pušavec, and J. Kopač, A New Approach to Spatial Tool Wear Analysis and Monitoring, Journal of Mechanical Engineering 61, Issue 9, 489-497 (2015) [CrossRef] [Google Scholar]
- T. D. Marusich and M. Ortiz, Modelling and Simulation of High-Speed Machining, International Journal of Numerical Methods in Engineering, 38, 3675-3694 (1995) [CrossRef] [Google Scholar]
- R. Laubscher, G. Styger, and G. Oosthuizen, A numerical analysis of machininginduced residual stresses of grade 5 titanium alloy, R & D J. South Afr. Inst. Mech. Eng. 30, 39–46 (2014) [Google Scholar]
- AdvantEdgeTM USER MANUAL, 1-340 (2020) [Google Scholar]
- S. K. Mishra, S. Ghosh, S. Aravindan, Temporal and spatial crater wear prediction of WC/Co tools during dry turning of Ti6Al4V alloy, Wear, 448–449, 203-229 (2020) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.