Design of an Experimental Device for Simulation of Pipeline Expansion

Juraj Drga; Michal Holubčík; Stanislav Gavlas

doi:10.1051/matecconf/202032803005

All issues

Volume 328 (2020)

MATEC Web Conf., 328 (2020) 03005

References

Open Access

Issue		MATEC Web Conf. Volume 328, 2020 XXII. International Scientific Conference – The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2020 (AEaNMiFMaE-2020)


Article Number		03005
Number of page(s)		8
Section		Special Experimental Methods in Fluid Mechanics and Energy
DOI		https://doi.org/10.1051/matecconf/202032803005
Published online		18 November 2020

J. Neckářová, L. Doskočil, Potrubí a armatury, 137, 27 (1972) [Google Scholar]
P. Bhatia, A. Jha, Analytical calculation for piping thickness and stress (2014). Available from: <http://ijmcr.com/wp-content/uploads/2015/05/Paper21640-643.pdf> [Google Scholar]
A. Bokaian, Thermal expansion of pipe-in-pipe systems (2004). Available from: <https://www.sciencedirect.com/science/article/pii/S0951833904000929> [Google Scholar]
T. Gerlach, M. Achmus, M. Terceros, Numerical investigation on district heating pipelines under combined axial and lateral loading (2018). Available from: <https://www.sciencedirect.com/science/article/pii/S1876610218305046> [Google Scholar]
S. Scheiner, B. Pichler, B. Hellmich, J. Eberhardsteiner, Loading of soil-covered oil and gas pipelines due to adverse soil settlements – Protection against thermal dilatation -induced wear, involving geosynthetics (2006). Available from: <https://www.sciencedirect.com/science/article/pii/S0266352X06000851> [Google Scholar]
R. Lenhard, K. Kaduchová, Š. Papučík, J. Jandačka. Utilization of heat pipes for transfer heat from the flue gas into the heat transfer medium, EPJ web of conferences 67, 02067 (2014) [CrossRef] [EDP Sciences] [Google Scholar]
M. Neslušan, L. Trško, P. Minárik, J. Čapek, J. Bronček, F. Pastorek, J. Čížek, J. Moravec, Non-Destructive Evaluation of Steel Surfaces after Severe Plastic Deformation via the Barkhausen Noise Technique (2018) [Google Scholar]
M. Vantúch, J. Hužvár, A. Kapjor, Heat transfer, 8th International Conference on Experimental Fluid Mechanics Location, Liberec (2013) [Google Scholar]
P. Pospíšil, Kompenzace délkových změn potrubí (2020). Available from: <https://adoc.tips/kompenzace-delkovych-zmn-potrubi.html> [Google Scholar]
Z. Mingaleva, I. Klackova, A. Selezneva, N. Shaidurova, Failure Mode and Effects Analysis of the Consequences of the Life Cycle of the University Educational Services. ICETA 2019, 845, 531-535 (2019) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] J. Neckářová, L. Doskočil, Potrubí a armatury, 137, 27 (1972) [Google Scholar]

[2] P. Bhatia, A. Jha, Analytical calculation for piping thickness and stress (2014). Available from: <http://ijmcr.com/wp-content/uploads/2015/05/Paper21640-643.pdf> [Google Scholar]

[3] A. Bokaian, Thermal expansion of pipe-in-pipe systems (2004). Available from: <https://www.sciencedirect.com/science/article/pii/S0951833904000929> [Google Scholar]

[4] T. Gerlach, M. Achmus, M. Terceros, Numerical investigation on district heating pipelines under combined axial and lateral loading (2018). Available from: <https://www.sciencedirect.com/science/article/pii/S1876610218305046> [Google Scholar]

[5] S. Scheiner, B. Pichler, B. Hellmich, J. Eberhardsteiner, Loading of soil-covered oil and gas pipelines due to adverse soil settlements – Protection against thermal dilatation -induced wear, involving geosynthetics (2006). Available from: <https://www.sciencedirect.com/science/article/pii/S0266352X06000851> [Google Scholar]

[6] R. Lenhard, K. Kaduchová, Š. Papučík, J. Jandačka. Utilization of heat pipes for transfer heat from the flue gas into the heat transfer medium, EPJ web of conferences 67, 02067 (2014) [CrossRef] [EDP Sciences] [Google Scholar]

[7] M. Neslušan, L. Trško, P. Minárik, J. Čapek, J. Bronček, F. Pastorek, J. Čížek, J. Moravec, Non-Destructive Evaluation of Steel Surfaces after Severe Plastic Deformation via the Barkhausen Noise Technique (2018) [Google Scholar]

[8] M. Vantúch, J. Hužvár, A. Kapjor, Heat transfer, 8th International Conference on Experimental Fluid Mechanics Location, Liberec (2013) [Google Scholar]

[9] P. Pospíšil, Kompenzace délkových změn potrubí (2020). Available from: <https://adoc.tips/kompenzace-delkovych-zmn-potrubi.html> [Google Scholar]

[10] Z. Mingaleva, I. Klackova, A. Selezneva, N. Shaidurova, Failure Mode and Effects Analysis of the Consequences of the Life Cycle of the University Educational Services. ICETA 2019, 845, 531-535 (2019) [Google Scholar]